• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.298-303
• /
• 2001

Most of mechanical failures are caused by repeated loadings and therefore they are strongly related to fatigue. To avoid the failures caused by fatigue, determination of an optimal shape of a structure is one of the very important factors in the initial design stage. Shape optimization for a compact tension specimen in opening mode in fracture mechanics, was accomplished by the linear elastic fracture mechanics and the growth-strain method in this study. Also shape optimization for a cantilever beam in mixed mode was carried out by the same techniques. The linear elastic fracture mechanics was used to estimate stress intensity factors and fatigue lives. And the growth-strain method was used to optimize the shape of the initial shape of the specimens. From the results of the shape optimization, it was found that shapes of two types of specimens and a cantilever beam optimized by the growth-strain method prolong their fatigue lives very much. Therefore, it was verified that the growth-strain method is an appropriate technique for shape optimization of a structure having a crack.

• Journal of Mechanical Science and Technology
• /
• 제19권2호
• /
• pp.567-577
• /
• 2005

Several methods for improving the interlaminar strength and fracture toughness of composite materials are developed. Through-the-thickness stitching is considered one of the most common ways to prevent delamination. Stitching significantly increases the Mode I fracture toughness and moderately improves the Mode II fracture toughness. An analytical model has been developed for simulating the behavior of stitched double cantilever beam specimen under various loading conditions. For z-directional load and moment about the y-axis the numerical solutions are compared with the exact solutions. The derived formulation shows good accuracy when the relative error of displacement and rotation between numerical and exact solution were calculated. Thus we can use the present model with confidence in analyzing other problems involving stitched beams.

• 한국통신학회논문지
• /
• 제28권11A호
• /
• pp.929-935
• /
• 2003

ATM 교환기 망동기용 아날로그/디지털 혼합형 ASIC을 설계 제작하였다. 이 ASIC은 상대 시스템으로부터 전송되어온 46.94 MHz의 클럭을 이용하여 234.7/46.94 MHz의 시스템용 클럭 및 77.76/19.44 MHz의 가입자용 클럭을 발생시키는 역할을 하며, 전송된 클럭의 체크 및 선택 기능도 동시에 포함한다. 효율적인 ASIC 구성을 위하여 고속 클럭 발생을 위한 2개의 아날로그 PLL 회로는 전주문 방식으로, 외부 입력 클럭 체크 및 선택을 위한 디지털 회로는 표준 셀 방식으로 설계하였다. 또한, 아날로그 부분에는 일반 CMOS 공정으로 제작 가능한 저항 및 커패시터를 사용함으로서 0.8$\mu\textrm{m}$ 디지털 CMOS 공정으로 칩을 제작 가능케 하여 제작비용도 줄였다. 제작된 칩을 측정한 결과 234.7 MHz 및 19.44 MHz의 안정된 클럭을 발생하였으며, 클럭의 실효 지터도 각각 4 ㎰ 및 17 ㎰정도로 낮게 나타났다.

• 응용통계연구
• /
• 제25권1호
• /
• pp.153-162
• /
• 2012

선거여론조사에서 전화조사의 문제점인 모집단 포함률, 젊은층 재택률과 투표자 선정 등의 해결방안으로 유선 RDD와 무선 RDD의 혼합조사를 제안하였으며 2011년 10월 26일 서울시장 보궐선거 사전여론조사 데이터를 사용하여 제안한 결합조사의 적용가능성을 수치적으로 검증하였다. 본 연구를 통해 무선 RDD 표본은 유선 RDD 표본에 비해 분산이 컸지만 상대표준오차는 유사한 결과를 얻었다. 예측 정확성 측면에서 유무선 결합의 효과가 통계적으로 유의하지 않았지만 일반 선거여론조사에 적용할 경우 결합 표본을 통해 모집단 포함률을 확대하고 각 조사방법의 단점을 보완함으로써 선거 예측조사의 신뢰성을 제고할 수 있는 방안으로 활용될 수 있을 것으로 기대된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.37-38
• /
• 2009

SiC power device possesses attractive features, such as high breakdown voltage, high-speed switching capability, and high temperature operation. In general, device design has a significant effect on the switching characteristics. It is known that in SiC power MOSFET, the JFET region width is one of the most important parameters. In this paper, we demonstrated that the switching performance of DMOSFET is dependent on the with width of the JFET region by using 2-D Mixed-mode simulations. The 4H-SiC DMOSFETs with a JFET region designed to block 800 V were optimized for minimum loss by adjusting the parameters of the n JFET region, CSL, and n-drift layer. It has been found that the JFET region reduces specific on-resistance and therefore the switching characteristics depend on the JFET region.

• Structural Engineering and Mechanics
• /
• 제75권5호
• /
• pp.559-569
• /
• 2020

In the present study, the fracture toughness of U-shaped notches made of aluminum alloy Al7075-T6 under combined tension/out-of-plane shear loading conditions (mixed mode I/III) is studied by theoretical and experimental methods. In the experimental part, U-notched test samples are loaded using a previously developed fixture under mixed mode I/III loading and their load-carrying capacity (LCC) is measured. Then, due to the presence of considerable plasticity in the notch vicinity at crack initiation instance, using the Equivalent Material Concept (EMC) and with the help of the point stress (PS) and mean stress (MS) brittle failure criteria, the LCC of the tested samples is predicted theoretically. The EMC equates a ductile material with a virtual brittle material in order to avoid performing elastic-plastic analysis. Because of the very good match between the EMC-PS and EMC-MS combined criteria with the experimental results, the use of the combination of the criteria with EMC is recommended for designing U-notched aluminum plates in engineering structures. Meanwhile, because of nearly the same accuracy of the two criteria and the simplicity of the PS criterion relations, the use of EMC-PS failure model in design of notched Al7075-T6 components is superior to the EMC-MS criterion.

• 한국전기전자재료학회논문지
• /
• 제22권9호
• /
• pp.737-740
• /
• 2009

SiC power device possesses attractive features, such as high breakdown voltage, high-speed switching capability, and high temperature operation. In general, device design has a significant effect on the switching characteristics, In this paper, we demonstrated that the switching performance of DMOSFETs are dependent on the with Channel length ($L_{channel}$) and Current Spreading Layer thickness ($T_{CSL}$) by using 2-D Mixed-mode simulations. The 4H-SiC DMOSFETs with a JFET region designed to block 800 V were optimized for minimum loss by adjusting the parameters of the JFET region, CSL, and epilayer. It is found that improvement of switching speed in 4H-SiC DMOSFETs is essential to reduce the gate-source capacitance and channel resistance. Therefore, accurate modeling of the operating conditions are essential for the optimizatin of superior switching performance.

• 한국디지털건축인테리어학회논문집
• /
• 제8권2호
• /
• pp.47-56
• /
• 2008

The purpose of this study is to arrange the design elements and methods for sustainable community. After made the concept of sustainable community clear in the contemporary architecture and urban design, this study examines rural ecovillage, urban demonstration project, co-housing, new urbanism and urban village, and ecological township as the application modes of sustainable community. Through the cases of the application mode, the design elements for sustainable community were summarized as the followings: the symbiosis system with the nature, permaculture and edible landscape, identity, the technology for saving of resources and energy, the traffic system for the reduction of private motor use, mixed use development, and the housing with diversity. And the design methods for sustainable community were summarized as the followings: strategic planning, visioning, community action planning, workshops and charrette, environmental evaluation, and participation techniques.

• 한국전자파학회논문지
• /
• 제25권3호
• /
• pp.319-332
• /
• 2014

삽입 손실은 EMI 필터의 노이즈 제거 성능을 나타내는 주된 지표로 쓰인다. 본 논문에서는 기존의 방법보다 좀 더 정확하고 편하게 삽입 손실을 측정할 수 있는 방법에 대하여 연구하였다. 이와 관련하여 EMI 필터의 비이상적인 특성들을 모두 고려하기 위해 4포트 S-파라메터 측정을 통한 임의의 전원/부하 임피던스에 대한 차동 모드와 공통 모드의 삽입 손실을 구하는 방법에 대하여 제시하였다. 이를 활용하여 EMI 필터가 사용될 회로의 전원/부하 임피던스를 알고 있을 때, 시스템에 적용된 EMI 필터의 차동 모드 삽입 손실과 공통 모드 삽입 손실를 구할 수 있다. 또한, 이를 바탕으로 적절한 소자 값을 선택하기 위해 혼합 모드 변환, 체인 혼합 모드 변환 그리고 4포트 모델링을 통하여 임의의 소자 값에 따른 전체 시스템의 삽입 손실을 예측하는 방법에 대하여 제시하였다.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1512-1519
• /
• 2002

Most of mechanical failures are caused by repeated loadings and therefore they are strongly related to fatigue. To avoid the failures caused by fatigue, determination of an optimal shape of a structure is one of the very important factors in the initial design stage. Shape optimization fer two types of specimens, which are very typical ones in opening mode in fracture mechanics, was accomplished by the linear elastic fracture mechanics and the growth-strain method in this study. Also shape optimization for a cantilever beam in mixed mode was carried out by the same techniques. The linear elastic fracture mechanics was used to estimate stress intensity factors and fatigue lives. And the growth-strain method was used to optimize the shape of the initial shape of the specimens. From the results of the shape optimization, it was found that shapes of two types of specimens and a cantilever beam optimized by the growth-strain method prolong their fatigue lives significantly. Therefore, it was verified that the growth-strain method is an appropriate technique for shape optimization of a structure having a crack.