• 한국자동차공학회논문집
• /
• 제14권5호
• /
• pp.39-46
• /
• 2006

The fuel cell is one of promising environment-friendly energy sources for the next generation. The bipolar plate is a major component of the PEM fuel cell stack, which takes a large portion of stack cost. In this study, as alternative materials for bipolar plate of PEM fuel cells, graphite composites were fabricated by compression molding. Graphite particles mixed with epoxy resin were used as the main substance to provide electric conductivity To achieve desired electrical properties, specimens made with different mixing ratio, processing pressure and temperature were tested. To increase mechanical strength, one or two layers of woven carbon fabric were added to the graphite and resin composite. Thus, the composite material was consisted of three phases: graphite particles, carbon fabric, and epoxy resin. By increasing mixing ratio of graphite, fabricated pressure and process temperature, the electric conductivity of the composite was improved. The results of tensile test showed that the tensile strength of the two-phase graphite composite was about 4MPa, and that of three-phase composite was increased to 57MPa. As surface properties, contact an91e and surface roughness were tested. Graphite composites showed contact angles higher than $90^{\circ}$, which mean low surface energy. The average surface roughness of the composite specimens was $0.96{\mu}m$.

• 한국물환경학회지
• /
• 제21권4호
• /
• pp.347-352
• /
• 2005

The isolated microorganisms, Pseudomonas stutzeri, Raoultella planticola (Klebsiella), Serratia fonticola from petroleum contaminated soil were enriched on benzene, toluene, ethylbenzene, o-xylene as carbon and energy sources, respectively. And the degradation characteristics of BTEX was observed in the mixed BTEX substrates. We found that the BTEX in mixed substrates were degraded more than 50% by three isolated microorganisms. Among three isolated microorganisms, the highest degradation rate was observed in Pseudomonas stutzeri, but the degradation rate was different according to microorganisms. In order to increase the degradation efficiency, we applied the co-culture of isolated three microorganisms. The mixture rate of pseudomonas stutzeri : Raoultella planticola (Klebsiella) : Serratia fonticola was follows ; 1:2:1, 1:1:2, and 2:1:1, respectively. In two co-culture of 1:2:1 and 1:1:2, degradation rate was lower than isolated microorganisms. However, degradation rate became higher than isolated microorganisms and the degradation rate of benzene, toluene, and ethylene was more than 95% in co-culture of 2:1:1. The degradation rate increased through the co-culture of isolated microorganisms, however, the growth rate decreased. This was resulted from the substrate competition between microorganisms. The co-culture of microorganisms is a effective method to increase the degradation efficiency of BTEX and the co-culture mixing rate is a important factor for determination of degradation efficiency.

• Journal of Microbiology and Biotechnology
• /
• 제17권3호
• /
• pp.496-510
• /
• 2007

This paper describes the use of a discrete mathematical model to represent the basic mechanisms of regulation of the bacteria E. coli in batch fermentation. The specific phenomena studied were the changes in metabolism and genetic regulation when the bacteria use three different carbon substrates (glucose, glycerol, and acetate). The model correctly predicts the behavior of E. coli vis-a-vis substrate mixtures. In a mixture of glucose, glycerol, and acetate, it prefers glucose, then glycerol, and finally acetate. The model included 67 nodes; 28 were genes, 20 enzymes, and 19 regulators/biochemical compounds. The model represents both the genetic regulation and metabolic networks in an integrated form, which is how they function biologically. This is one of the first attempts to include both of these networks in one model. Previously, discrete mathematical models were used only to describe genetic regulation networks. The study of the network dynamics generated 8 $(2^3)$ fixed points, one for each nutrient configuration (substrate mixture) in the medium. The fixed points of the discrete model reflect the phenotypes described. Gene expression and the patterns of the metabolic fluxes generated are described accurately. The activation of the gene regulation network depends basically on the presence of glucose and glycerol. The model predicts the behavior when mixed carbon sources are utilized as well as when there is no carbon source present. Fictitious jokers (Joker1, Joker2, and Repressor SdhC) had to be created to control 12 genes whose regulation mechanism is unknown, since glycerol and glucose do not act directly on the genes. The approach presented in this paper is particularly useful to investigate potential unknown gene regulation mechanisms; such a novel approach can also be used to describe other gene regulation situations such as the comparison between non-recombinant and recombinant yeast strain, producing recombinant proteins, presently under investigation in our group.

• 미생물학회지
• /
• 제54권2호
• /
• pp.105-112
• /
• 2018

본 연구에서 탈질 효율 비교를 위해 당밀과 메탄올을 외부 탄소원으로 사용하였다. 세부 실험조건은 C/N ratio 조건에 따라 구분하였다. 회분식 실험 결과, 당밀과 메탄올 모두 C/N ratio가 증가할수록 탈질 효율은 증가하였다. 당밀의 최적 C/N ratio는 잔류 COD 농도와 탈질 효율을 고려할 때 4:1로 나타났으며, 이때 탈질 효율은 91.4%이다. 동역학적 인자로 SDNR을 도출한 결과, C/N ratio가 증가할수록 당밀과 메탄올은 유사한 SDNR 값을 보였으며, C/N ratio 4:1 조건에서 0.0292 g $NO_3{^-}-N$ removal/g MLVSS/day (molasse), 0.0299 g $NO_3{^-}-N$ removal/g MLVSS/day (mehtanol)로 나타났다. 미생물 군집 분석을 통해 당밀에 적응된 슬러지에는 Pseudomonas sp.와 Bergeylla sp. 박테리아가 우점화 된 것을 확인할 수 있었다. 또한 미생물 군집의 다양성보다는 일부 박테리아에 대한 집중성이 더 높게 나타났다. 이에 따라 당밀은 탈질에 특화된 미생물을 집중적으로 성장시키며, 탈질 성능을 높일 수 있는 대체 외부탄소원으로 적용이 가능할 것으로 판단된다.

• 한국농공학회논문집
• /
• 제49권2호
• /
• pp.75-86
• /
• 2007

This process which has a connection of biofilter and sulfur-limestone has been developed to treat organic substances including BOD, COD and SS etc. and to treat sulfur-limestone is for denitrification.. The whole process consists of chemical reaction tank, sedimentation tank, trickling filter, denitrification tank The trickling filter is equipped with a reactor filled with absorptive filter, and the sulfur denitrification tank is filled with sulfur-limestone mixed media. After setting up practical facilities whose capacity is 60 tons a day, we have observed the removal efficiencies of pollutants through 60 experiments during Summer and Winter seasons. The average concentration of polluted water was BOD for 3.6 mg/L, $COD_{Mn}$ for 11.3 mg/L, SS for 2.8 mg/L, T-N for 8.6 mg/L, and T-P for 0.8 mg/L, and the rate of treatment efficiencies 96.5%, 84.7%, 96.5%, 79.2%, and 80.8%, respectively was found through the experiments. The average treatment efficiency for BOD and $COD_{Mn}$ was 85.0% and 55.7%, respectively and the average removal efficiency for NH4+-N was 84.9% in the trickling filter. The removal efficiency in the denitrification tank is as follows; The removal rate of $NO_3^--N$ was as high as 93.2% within the compass of pH 6.3 to 7.3 through $16.8{\sim}37.0mg/L$ flown into $NO_3^--N$ and $0.1{\sim}8.3mg/L$ outflown. It had observed that this process has implemented highly efficient and advanced treatment without external carbon sources and internal recycle during its process. In conclusion, this process is suitable for a sewerage in a small village due to the merits of low power consumption and easy maintenance.

• 상하수도학회지
• /
• 제19권6호
• /
• pp.720-727
• /
• 2005

This study was performed to advance nitrogen removal efficiency by employing an single biofilter packed with granular sulfur, which consists of nitrification occurring at upper part and denitrification at lower part of the reactor. Continuos nitrification/denitrification was carried out with different alkalinity sources, which were $NaHCO_3$ and $CaCO_3$(limestone). In the downflow nitrification/denitrification biofilter packed with granular sulfur, first, terms for nitrogen removal was decided. As results, nitrification and denitrification rate with NaHCO3 at 0.85 kg $NH_4^+-N/m^3{\cdot}d$ were accomplished $0.80kg\;N/m_3{\cdot}d$, $0.43kg\;N/m^3{\cdot}d$, respectively. In the sulfur/limestone packed downflow nitrification/denitrification biofilter, sulfur and limestone were mixed packed, preliminary test showed sulfur/limestone mixing ratio was 3:1 and that was ideal. In the result, nitrification and denitrification rate at $0.7kg\;NH_4^+-N/m^3{\cdot}d$ were accomplished$0.65kg\;N/m^3{\cdot}d$, $0.34kg\;N/m^3{\cdot}d$, respectively. In general, employing granular sulfur can be implemented for only denitrification, but this system can accomplish nitrification as well as denitrification in a single reactor even though low carbon concentration was present in influent limiting to nutrient removal process. This biofilter system of limestone and granular sulfur packed together can successfully apply for nutrient removal effectively.

• 한국물환경학회지
• /
• 제38권2호
• /
• pp.72-81
• /
• 2022

Numerous studies have investigated the occurrence and fate of microplastics in the environment; however, only limited effort has been devoted to exploring the characteristics of dissolved organic matter (DOM) leached from microplastics. In microplastic (MP)-contaminated environment, MPs are typically mixed with naturally-occurring particles, which interferes with their detection in the environment. Thus, it is necessary to distinguish between the DOM leached from MPs and those leached from natural particles and also to characterize their properties. This study investigated DOM leaching behavior from MPs (polystyrene: PS, polyvinylchloride: PVC) and natural particulates (forest soil: FS, litter leaves: LL) under light, which is considered one of the main weathering processes that affect MPs in the environment. The leached DOM concentrations and fluorescence characteristics were compared under dark versus light conditions. Regardless of the origins, UV light promoted DOM release from all the particulates. More DOM was released from natural particles than from MPs under both conditions. However, the effect of promoting DOM release by UV was more pronounced for MPs than for natural particles. It was observed from fluorescence spectra that the intensity of the humic-like region was substantially reduced when MP-derived DOM was exposed to UV light, whereas the change of intensity was very little for natural particles. Under light conditions, the ratio of protein-like to humic-like fluorescence of MP-derived DOM was higher than that of DOM from natural particles. This study implies that a substantial amount of DOM could be leached from MPs even in MP-polluted environment under UV irradiation. Protein/humic fluorescence ratio could be utilized as a fast probing indicator to separate the two sources of particles under light.

• 한국해양환경ㆍ에너지학회지
• /
• 제8권4호
• /
• pp.179-185
• /
• 2005

다환방향족 탄화수소는 주요한 독성환경오염물질풍의 하나이며 해양퇴적물에 축적이 된다. 다환방향족 탄화수소가 가지고 있는 위해성으로 인해 해양퇴적물내의 다환방향족 탄화수소 제거는 많은 관심사가 되어오고 있다. 본 연구에서는 다환방향족 탄화수소로 오염된 해양퇴적물의 생물정화를 위해 bioslurry reactor를 사용하기 위한 전단계로 ex situ bioremediation을 위한 최적 조건을 찾기 위해 멸균 유무의 퇴적물에서 균주접종과 혼합 cyclodextrin (M-CD)공급의 효과를 알아보았다. 비멸균상태의 퇴적물에서 분해균주의 접종여부에 상관없이 M-CD가 첨가된 실험구의 전자전달계활성이 증가되었고 멸균상태의 퇴적물에서는 분해균주가 접종되고 M-CD가 첨가된 실험구의 전자전달계활성이 증가되었다. 멸균상태의 퇴적물에서 M-CD와 함께 단일 균주가 접종되었을 때 퇴적물내의 다환방향족 탄화수소의 분해율이 9-20%로 나타났으며 동일한 조건에서 혼합균주가 접종되었을 때는 24-37%로 나타났다. 비멸균상태의 퇴적물에서 동일한 조건으로 실험하였을 때는 유의한 분해가 일어나지 않았으며 군집분석 결과 접종 균주도 감소하였다. 또한 M-CD 첨가 없이는 2일후 접종균주를 찾아볼 수 없었다. 결론적으로 퇴적물내의 다환방향족 탄화수소 제거를 위해 퇴적물내의 토착미생물과 포식자가 제거된 상태에서 적절한 탄소원과 함께 균주를 접종하는 것이 효과적인 것으로 나타났다.

• Journal of Microbiology and Biotechnology
• /
• 제11권3호
• /
• pp.435-442
• /
• 2001

Poly(3-hydroxy-5-phenylvalerate) [P(3HPV)] was efficiently accumulated from 5-phenylvalerate (5PV) in Pseudomonas putida BM01 in a mineral salts medium containing butyric acid (BA) as the cosubstrate. A nove aromatic copolyester, poly(5 mol% 3-hydroxy-4-phenylbutyrate-co- 95 mol% 3-hydroxy-6-phenylhexanoate) [P(3HPB-co-3HPC)] was also synthesized from 6-phenylhexanoate (6PC) plus Ba. The two aromatic polymers, P(3HPV) and P(3HPB-co-3HPC), were found to be amorphous and showed different glass-transition temperatures at $15^{\circ}C$ and $10^{\circ}C$, respectively. When the bacterium was grown ina medium containing 20 mM 5PV as the sole carbon source for 140 h, 0.4 g/l of dry cells was obtained in a flask cultivation and 20 wt% of P(3HPV) homopolymer was accumulated in the cells. However, when it was grown with a mixture of 2 mM 5PV and 50 mM BA for 40 h, the yield of dry biomass was increased up to 2.5 g/l and the content of P(3HPV) in the dry cells was optimally 56 wt%. This efficient production of P(3HPV) homopolymer from the mixed substrate was feasible because BA only supported cell growth and did not induce any aliphatic PHA accumulation. The metabolites released into the PHA synthesis medium were analyzed using GC or GC/MS. Two $\beta$-oxidation derivatives, 3-phenylpropionic acid and trans-cinnamic acid, were found in the 5V-grown cell medium and these comprised 55-88 mol% of the 5PV consumed. In the 6PC-grown medium containing Ba, seven ${\beta}$-oxidation and related intermediates were found, which included phenylacetic acid, 4-phenylbutyric acid, cis-4-phenyl-2-butenoic acid, trans-4-phenyl-3-butenoic acid, trans-4-phenyl-2-butenoic acid, 3-hydroxy-4-phenylbutyric acid, and 3-hydroxy-6-phenylhexanoic acid. Accordingly, based on the metabolite analysis, PHA synthesis pathways from the two aromatic carbon sources are suggested.

• 한국환경농학회지
• /
• 제37권2호
• /
• pp.79-86
• /
• 2018

BACKGROUND: Chinese cabbage biosynthesizes various phytochemicals including carotenoids and glucosinolates. Environmental stress has a major effect on the growth and yields of vegetables, and can significantly affect nutritionally important phytochemicals. Phytochemicals of plants are influenced by light, temperature, carbon dioxide, and growing conditions. The aim of this study was to investigate the effect of various light sources on carotenoid and glucosinolate contents in Chinese cabbage. METHODS AND RESULTS: [Experiment I] Set the control (field control, FC) on the ground. Using acrylic sunlight, experiments were set up transparency box (field transparency, FT), red box (field red, FR) and blue box (field blue, FB). [Experiment II] Set the control (chamber control, CC) in the greenhouse. Using plant growth chamber with artificial light, experiments were set up LED red (chamber red, CR), LED blue (chamber blue, CB), LED mixed red+blue (chamber red+blue, CRB) and fluorescent (chamber fluorescent, CF). After plant growth, Chinese cabbage was harvested at 110 days after sowing (DAS). The status of plants growth (leaf length, width, fresh weight etc.) was immediately investigated. Carotenoid and GSL contents were analyzed by HPLC. [Experiment I] Results documented that the ranges of total carotenoid contents were 25.39 ~ 58.80 mg/kg dry wt for lutein, 0.84~ 4.22 mg/kg dry wt for zeaxanthin, and 3.85~18.71 mg/kg dry wt for ${\beta}$-carotene. Lutein was the highest for the content and the largest for the variation as well. [Experiment II] Results documented that the ranges of total carotenoid contents were 24.66~137.96 for lutein, 2.51~20.65 for zeaxanthin, and 8.40~49.80 mg/kg dry wt for ${\beta}$-carotene. The total carotenoid contents of CR (156.62) and CB (115.90) were 1.6~2.3 times larger than the other treatments, and ${\beta}$-carotene content was about twice as high as that of the other treatments on the CR (38.74 mg/kg dry wt.). [Experiment I] Total GSL content was the highest in FT (19.76) that was higher 1.7 times than the lowest treatment ($11.39{\mu}mol/g\;dry\;wt$.). [Experiment II] The total content of GSL was highest in CRB (4.19) and lowest in CF ($2.88{\mu}mol/g\;dry\;wt$.). In the CRB, total GSL contents ($4.19{\mu}mol/g\;dry\;wt$.) was the highest. CONCLUSION: Total and individual carotenoid and GSL contents in Chinese cabbage show significant differences under different light sources. Red and blue lights contribute to significant carotenoids expression and antioxidant activity for nutrition and health benefits. These results concluded that the introduction of varying lights affected the synthesis of important nutrient compounds in Chinese cabbage. It is predicted that the application of good light source enhances the accumulation of functional compounds.