• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.105-108
• /
• 1993

This paper is concerned with a two-degree-offreedom control system design for a flexible arm, a two-degree-of-frecdom control system can achieve a robust stability specification and a control performance specification independently. By this property we improve the control performance with maintaining the same robust stability level as that of the onc-dcgree-of-freedom control system. At First we design a two-degree-of-fteedom control system which includes a feedforward controller and a feedback controller. The feedforward controller can be given by specifying a transfer function of a dcsired closed-loop model. We obtain a feedback controller by solving a mixed sensitivity problem. Several numerical results show that two-degree-of-freedom control systems acheive a better control performance than that of one-degree-of-freedom control systems.

• Journal of Advanced Marine Engineering and Technology
• /
• 제17권3호
• /
• pp.42-49
• /
• 1993

Recently, because the lubricating oil showed a tendency to be emulsified and oxidized by high speed, high output and the extension of maintenance & conservation of marine engine, the cavitation erosion-corrosion at such an environment became a big problem on effective performance of engine. Therefore, there was a need to study the behavior and protection of erosion-corrosion damage, and then applied inhibitor to a protective method of cavitation erosion- corrosion damage. At this time, test environments were marine lubricating oil & various emulsified oil that mixed distilled water and sea water etc., and also used 20KHz, 24.mu.m piezoelectric vibrator as an experimental apparatus of cavitation erosion. With this apparatus, we investigated an influence of the emulsified oil on characteristics of erosion-corrosion and protection for erosion-corrosion by inhibitor at slide bearing metals.

• International Journal of Automotive Technology
• /
• 제6권4호
• /
• pp.413-419
• /
• 2005

The United States automotive recycling infrastructure has successfully reduced the amount of automotive waste sent to landfills, especially since the introduction of shredders in the late 1950s. Shredders are necessary to process and recycle automotive hulks and other durable goods. However, this industry faces significant challenges as the automotive manufacturers are increasing the use of nonmetallic components which are difficult to recycle. Additionally, it is becoming obvious that automobiles contain hazardous materials which place heavy burdens on the environment. To address this growing concern, we propose a process planning model for automotive shredders to make tactical decisions regarding at what level to process and at what level to reprocess feed stock materials. The purpose of this paper is to test analytical models to help shredders improve the profitability and efficiency of the bulk recycling processes for end of life automobile returns. The work is motivated by an actual recycling problem that was observed at Capitol City Metals shredding facility in Indianapolis, Indiana.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권3호
• /
• pp.84-90
• /
• 1995

The magnetic levitation system has great advantages, such as little friction, no lubrication no noise and so on. The magnetic levitation system need a stabilizing controller because it is a unstable system in natural. This paper presents the robust stabilizing controller design of the magnetic levitation system. The controller which is designed in this paper by $H_{infty}$ control theory is robust servo controller which has zero offset in spite of the model uncertainties. The validity of controller was investigater through the response simulation. In the future, we will use the result of this study at the actual magnetic levitation system.

• 제어로봇시스템학회논문지
• /
• 제5권6호
• /
• pp.667-675
• /
• 1999

In this paper, we propose a robust controller design of RTP(Rapid Thermal Processing) system using structured uncertainty approach. Using the weighted mixed sensitivity function, we solve the robust stability problem against disturbance and temperature variation, and design a $\mu$ controller using curve fitting method against structured uncertainty. Also the reduction method should be requried because of the difficulty of implementaion with the obtained high order controller. We dal with robust stability and performance of RTP system by the design of $\mu$ controller for original model and Schur balanced reduced model. Finally the simulation results are proposed to show the validity of the proposed method.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.293-298
• /
• 1997

The H$_{\infty}$robust controller fur the reactor power control system is designed by use of the mixed weight sensitivity. The system is configured into the typical two-port model with which the weight functions are augmented. Since the solution depends on the weighting functions and the problem is of non-convex, the genetic algorithm is used to determine the weighting functions. The cost function applied in the genetic algorithm permits the direct control of the power tracking performances. In addition, the actual operating constraints such as rod velocity and acceleration can be treated as design parameters. Compared with the conventional approach, the controller designed by the genetic algorithm results in the better performances with the realistic constraints. Also, it is found that the genetic algorithm could be used as an effective tool in the robust design. robust design.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권3호
• /
• pp.144-153
• /
• 1996

The magnetic levitation system has many advantages, such as little friction, no lubrication, no noise and so on. For this reason, the magnetic levitation system is utilized in the magnetic bearing of high-speed rotor. The method to obtain magnetic force is both the repulsive suspension method and the attraction suspension method need a stabilizing controller because it is a unstable system in natural. This paper presents the design of robust stabilizing servo controller in spite of being the model uncertainties in the magnetic levitation system by $\textit{H}_{\infty}$ control theory using the free parameter. And we investigated the validity of a designed controller through results of the simulation and the actual experiment.

• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.92-99
• /
• 2001

This paper presents a simulation study using a robust controller to improve the roll stability of a vehicle. The controller is designed in the framework of an output feedback H$_{\infty}$ control scheme based on the 3DOF linear vehicle model, solving the mixed-sensitivity problem to guarantee the robust stability and disturbance rejection with respect to parameter variations due to laden and running vehicle conditions. In order to investigate the feasibility of the active roll control system in a real car, its performance is evaluated by simulation in a 10DOF full vehicle model with actuator dynamics and tire characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1018-1020
• /
• 1996

In this paper, when a robust active noise controller for a small cavity to control the noise induced in the cavity is designed, the Graphical method based on the robust stability and performance requirements is studied. The problem of designing controller that achieve these robust performance conditions is related to minimizing the $H_{\infty}$ norm of the mixed sensitivity function by using $H_{\infty}$ control theory. Also, For design the controller, the loopshaping method which control the weight functions to satisfy the design specification without loss of a robust performance can be used. Therefore, we determined the acceptable design specification with the system characteristics of the small cavity and obtained its robust controller with the robust performance specifications by stability margin.

• 대한교통학회지
• /
• 제31권2호
• /
• pp.80-89
• /
• 2013

본 연구는 지역간 여객 철도의 노선계획을 최적화하는 방법에 관한 연구이다. 본 연구의 노선계획 모형은 다양한 차종이 운용되는 철도노선에서 이용자비용(이용자의 총 통행시간)과 운영자비용(열차 운행비용, 유지 보수비용, 차량 구입비용)의 합을 최소화하고자 하는 혼합정수계획 수리모형으로 구축되었고, 모형의 해법으로 분기한정법이 사용되었다. 수요의 변화, 열차 속도의 변화, 정차스케줄 수의 변화 등에 대한 민감도 분석 결과도 제시하였고, 국내 경부선의 사례연구를 통하여 각 열차차종의 차종별 수요 분할 뿐만 아니라 최적 정차스케줄과 운행빈도를 동시에 산출할 수 있음을 보여주었다. 본 연구의 모형과 결과는 열차 운영 전략을 수립하거나 새로운 철도 시스템의 효율성을 분석하거나 이용자 운영자의 사회적 비용을 산정하는 경우 등에 적용될 수 있다.