• 대한토목학회논문집
• /
• 제26권4C호
• /
• pp.283-290
• /
• 2006

콘크리트는 열전도열이 작은 불연성의 재료이다. 그렇지만 콘크리트는 화재에 저항하도록 설계되지 않으면 열을 받을시 공극압과 내부인장응력이 발생하여 폭렬이 발생한다. 본 연구에서는 터널 내화용 습식 고강도 스프레이 폴리머 모르타르의 성능을 실험적 및 수치해석적으로 평가하였다. 이를 위하여 화재시험을 수행하였다. 시험은 RABT 온도가열곡선을 이용하여 내화로에서 수행하였으며, 터널 내화용 습식 스프레이 모르타르의 피복두께에 따른 온도분포를 평가하였다. 실험 및 수치해석적 분석 결과를 기본으로 하여 터널 내화용 습식 고강도 스프레이 폴리머 모르타르의 적정 피복두께는 4cm이상으로 결정하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권9호
• /
• pp.4255-4261
• /
• 2012

The present study was conducted to evaluate radioimmunoimaging (RII) and in vivo distribution of mixed antibodies $^{99m}Tc$-EGFR-mAb and $^{99m}Tc$-CD44-mAb in nude mice bearing human lung adenocarcinoma xenografts. Single and mixed applications of the two radiolabeled monoclonal antibodies (mAbs) were compared. Direct labeling of $^{99m}Tc$ was applied to radiolabel the EGFR and CD44 mAbs. The properties of the radiolabeled antibodies were then characterized. RII and assessment of the distribution of the antibodies in nude mice bearing lung adenocarcinoma xenografts were achieved by applying separate and combined doses of $^{99m}Tc$-EGFR-mAb and $^{99m}Tc$-CD44-mAb. The labeling rates of $^{99m}Tc$ for EGFR-mAb and CD44-mAb were $91.5%{\pm}3.8%$ and $92.3%{\pm}4.1%$ respectively, with specific activities of 2.8 and $2.9MBq/{\mu}g$, respectively, and radiochemical purities (RCP) of 96.5% and 96.2%. The radioactivity uptake of the combined application of both radiolabeled antibodies was clearly higher than with a single application of either alone. The relative values of target-to-nontarget (T/NT) measured through the regional interest (ROI) technique were $5.59{\pm}0.42$ (mixed antibodies), $2.78{\pm}0.20$ ($^{99m}Tc$-EGFR-mAb), and $2.28{\pm}0.16$ ($^{99m}Tc$-CD44-mAb) in the RII. The body distribution of the radiolabeled antibodies and their imaging results were basically identical. Application of the mixed antibodies with $^{99m}Tc$-EGFR-mAb and $^{99m}Tc$-CD44-mAb can increase the radioactivity uptake of tumor tissue, leading to more ideal target-to-nontarget ratios, and therefore superior results.

• 한국토양비료학회지
• /
• 제42권4호
• /
• pp.280-288
• /
• 2009

간척지에서 식생의 공간적 분포 변이에 영향을 주는 요인을 알아내기 위하여, 중서부 해안 경기만의 신간척지와 간척연대가 다른 간척지 세 곳, 그리고 이들의 인근 비간척 간석지에서 식생 분포를 조사하였다. 토양 염도의 지표로 포화침출액의 전기전도도를 조사하였다. 토양염도에 따라 식생 분포가 확연이 달랐다. 토양 염도에 따라 각 식생의 최적 서식지가 존재하며, 이는 저염도 지점에는 중성 식물이, 고염도 지점에는 염생식물이 분포함을 의미하고 있다. 서식 식물 군집에 따른 토양 염도의 순서는 다음과 같다. 즉, 토양 염도는 식생 위조지>선구 염생식물지> 혼합선구염생식물지> 선구염생식물지> 선구염생식물 및 통성 염생식물 혼합지> 혼합 통성염색식물지> 통성염생식물 및 중성식물 혼합지>혼합 중성식물지의 순이었다. 이 결과는 토양 염도의 공간적 토양 구배에 따라 식물 종의 분포가 이루어짐을 보여 주고 있으며, 이에 따라 식물종의 분포에 따라 토양 염도의 차이를 판단할 수 있음을 시사하고 있다. 토양 염도와 식물종의 분포양상 관계는 여러 간척지간에 큰 차이를 보이지 않았고, 식물 군락 밀집도가 간척 이후 식생이 어떤 방향으로 천이되는지의 지표를 제시하여주고 있다.

• 환경영향평가
• /
• 제11권4호
• /
• pp.247-258
• /
• 2002

This study aimed at verifying the grain-sized distribution of surface deposits in a tidal flat using multi-spectral Landsat TM. In this study, we employed the grain-sized analysis, PCA and unsupervised classification techniques for analyzing the distribution of deposits. As a result in this study, the unsupervised classification method using PCA image was found to be most useful in classifying tidal flat deposits using satellite data. This method is considerably effective in analyzing not only the aspects of distribution in terms of accumulated deposits and erosion, but also the changes in seaside topography and shoreline. The grain-sized distribution analysis indicates that the mud flat inside the Cheonsu-bay tidal flat is distributed, the mixed flat located in the middle, and the sand flat distributed near the sea. The sand flat is dominant around the southern part of Seomot isle and its beach. On the other hand, the mud and mixed flat is dominant on the western part. Likewise, the western coast of Seomot isle and its beach is significantly affected by waves facing the offshore. However, the eastern side of the bay could be a site for the evolution of tidal flat made of fine materials where it is less affected by ocean waves. These results show that multi-spectral satellite data are effective for the classification of distribution materials and environmental impact assessment and continuous monitoring. In particular, the research on environmental deposits can provide important decision-supporting information for decision-making on seaside development, by analyzing the progress of deposits and environmental changes.

• 한국산업융합학회 논문집
• /
• 제24권5호
• /
• pp.617-623
• /
• 2021

The objective of this study is to simulate valve flow coefficient and flow characteristics such as velocity and pressure distribution for butterfly valve. The size of the valve used in this study is 125A. The range of the valve opening angle was α=15°~70°, and it was changed by 5°. At the range of α=15°~30°, the valve flow coefficient K_𝜐 gradually increased, and after α=30°, it increased rapidly. In the range of α=20°~70°, the pressure change in the -2.9cm~+2.9cm region in the pipe greatly depended on the opening angle and the position within the pipe. However, after +2.9cm, the pressure at the rear end of the valve was shown to depend only on the opening angle. At α=20°, Vortex shedding occurred for the first time at time t=0.25sec and continuously occurred in rear end of the valve over time. After α=45°, in the flow pattern at the rear end of the valve, the upward flow at the lower end of the valve and the flow at the upper end met each other to form a mixed flow. This flow phenomenon was shown to form a more intense mixed flow in the rear end region as the opening angle increased. Vortex flow occurred for the first time at α=15°, and the opening angle increased, the occurrence and disappearance of this flow phenomenon occurred periodically according to the certain flow region. The pattern of the pressure distribution in the region at the rear end of the valve showed a tendency to agree well with the results of the vorticity distribution.

• 한국수소및신에너지학회논문집
• /
• 제29권6호
• /
• pp.654-660
• /
• 2018

The dependence on global fossil fuels has been gradually reducing all over the world. Some countries which recognized the important of environmental values were joining to carry out international GHG goals. Our country has also participated with high targets (37% reduction compared to BAU 2030 years). So we need to supply materials of lower GHG value such as a bio-diesel. Bio-alcohol is one of the similar bio-fuels that can be reducing GHG. A lot of countries had tried to commercialize through various R&D for bio-alcohol. In this study, we analyzed the fuel characteristics of bio-alcohol fuel produced by domestic technology. And we evaluated a possibility to use as vehicle fuel through mixing of bio-alcohol and gasoline. The mixed fuels were satisfied with 2.3 wt% of oxygen content that is standard of the petroleum and petroleum alternative fuel business Act. We tried to evaluate a emission characteristic of vehicle by mixed fuel. In accordance with the results we tried to find a correlation between fuel and emission.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.79-80
• /
• 2002

This paper presents an experimental study of the effect of rolling speed and surface roughness on the mixed elastohydrodynamic (EHD) lubrication characteristics for point contact formed between a real, random, rough surface, steel ball and smooth glass disc. The Thin Film Colorimetic Interferometry measurement technique has been extended to give detailed information about in-contact deformation of the microgeometry. It has enabled to derive the amplitude reduction curve that shows progressive recovering of ball roughness features with increasing speed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
• /
• pp.399-402
• /
• 2000

In this paper, we present a regularized mixed norm multichannel image restoration algorithm. The problem of multichannel restoration using both within- and between- channel deterministic information is considered. For each channel a functional which combines the least mean squares (LMS), the least mean fourth(LMF), and a smoothing functional is proposed, We introduce a mixed norm parameter that controls the relative contribution between the LMS and the LMF, and a regularization parameter that defines the degree of smoothness of the solution, both updated at each iteration according to the noise characteristics of each channel. The novelty of the proposed algorithm is that no knowledge of the noise distribution for each channel is required, and the parameters mentioned above are adjusted based on the partially restored image.

• The Korean Journal of Ceramics
• /
• 제2권4호
• /
• pp.251-256
• /
• 1996

Effect of mixed grinding with a planetary ball mill of starting materials before heat treatment on the crystal structure and superconduction properties in the YBaCu composite oxide was studied. The size reduction of powders too place in the early stage of grinding, followed by aggregation of the resultant fine particles. The uniformity of the composition in the mixture was improved with grinding, which later decreased in the crystal grain size and well distribution of twin phase in the sintered bodies. The critical current density of the sintered bodies obtained from the mixture ground for 60 minutes showed the maximum value about 150 A/$\textrm{cm}^2$, while critical temperatures were around 90K and were independent of the grinding time.

• 응용통계연구
• /
• 제22권1호
• /
• pp.153-161
• /
• 2009

We consider a logistic model with random effects as the superpopulation for estimating the small area pro-portions. The best linear unbiased predictor under linear mired model is popular in small area estimation. We use this type of estimator under logistic mixed motel for the small area proportions, on which the estimation of mean squared error is also discussed. Two kinds of estimation methods, the parametric bootstrap and the linear approximation will be compared through a Monte Carlo study in the respects of the normality assumption on the random effects distribution and also the magnitude of sample sizes on the approximation.