• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권4호
• /
• pp.176-180
• /
• 2004

This paper presents the fabrication and test of a micro cell exciter actuated by an electromagnetic force for the study on the chondrogenic differentiation of rabbit mesenchymal stem cells (MSCs). The micro cell exciter is designed to apply compressive loading to the alginate gel mixed with the MSCs. The magnetic cell exciter consists of an actuator component and a cartridge-type chamber component. An actuator is composed of a permanent magnet, a core and a coil. The chamber has seven PMMA wells and a cell culture Petri dish. Two types of alginate gels were stimulated by the cell exciters for 10 minutes every 12 hours for 7 days. In order to determine the expression of these matrix components during differentiation, RT-PCR analysis was performed. Collagen type II was expressed in the MSCs subjected to the compressive stimulation.

• 한국분말재료학회지
• /
• 제15권5호
• /
• pp.378-385
• /
• 2008

This article presents the successful consolidation of the mixed Co and Diamond powders for a drilling segment by the combined application of magnetic pulsed compaction (MPC) and subsequent sintering, and their properties were analyzed. Homogeneous hardness (Hv 220) and density (97%) of sintered bulks fabricated by MPC were obtained by the new technique, where higher pressure has been employed for short period of time than that of general process. A fine microstructure and homogeneous hardness in the consolidated bulk were observed without cracks. Relatively higher drilling speed of 9.61 cm/min and life time of 6.55 m were found to the MPCed specimens, whereas the value of the specimens fabricated by general process was 11.71 cm/min and 7.96 m, respectively. A substantial improvement of mechanical properties of segment was achieved through this study.

• 한국해양학회지
• /
• 제27권4호
• /
• pp.259-267
• /
• 1992

황해동부에서 1991년 4월에 관측된 CTD자료를 분석한 결과, 해수의 직구조는 계절적 수온약층과 수온역전층에 의해 뚜렷이 구분되는 상부혼합층 및 중층저온수로 저층 고온수 삼층구조를 보여준다. 조사지역 남부에서 저층수는 중층수보다 수온이 $3^{\circ}C$ 높아 수온역전이 가장 뚜렷하다. 수온역전은 $100{\;}km{\;}{\times}{\;}100{\;}km$의 관측해역에 걸쳐 형성 되었고 약 1.5개월후에도 관측되었다. 이 저층수의 수온과 염분은 단면내 핵구조 및 남쪽에서 분쪽으로 향하는 설상분포를 보여, 조사해역 남쪽에 있는 봄철 해양전선의 해수가 북쪽으로 150 km 정도의 거리에 걸쳐 황해냉수 아래로 요입된 것을 제시한다.

• 한국실내디자인학회논문집
• /
• 제22권6호
• /
• pp.241-250
• /
• 2013

In contemporary society, spa has become one of the important healing spaces. As the present urban life has been more and more complex and competitive, space of recreation and healing are dramatically increased in terms of its number as well as location. In the past, there were three kinds of spa visitors. The first was the people who visited spas for medical reasons. The second was the people who visited spas for leisure and refreshment. The third was for social gatherings like in the ancient Rome. In present time, these three reasons are mixed together. As the spa program became rich and various, visitors tends to seek an appropriate spa environment that suits their needs. This is the main background for contemporary spa designs. In any case, concept of healing has been always the core element in spa. Light and sense have vital role to make a unique spa design. This paper aims to study different light and sense applications in contemporary spa designs. Specific focus is to find how light and sense in spa designs act to create a healing environment. 4 spa projects built in Europe after 2000 were selected and were analyzed based on the 4 light and sense characteristics. In conclusion, case analysis was summarized to suggest future possibilities.

• Advances in concrete construction
• /
• 제10권1호
• /
• pp.13-20
• /
• 2020

Steel corrosion in embedded steel causes a significant durability problems and this usually propagates to structural degradation. Large-scaled concrete structures, PSC (Pre-stressed Concrete) or RC (Reinforced Concrete) structures, are usually constructed with mass concrete and require quite a long construction period. When they are located near to sea shore, chloride ion penetrates into concrete through direct or indirect exposure to marine environment, and this leads durability problems. Even if the structures are sheltered from chloride ingress outside after construction, the chloride contents which have been penetrated into concrete during the long construction period are differently evaluated from the initially mixed chloride content. In the study, chloride profiles in cores extracted from anchorage concrete block in two large-scaled suspension bridge (K and P structure) are evaluated considering the exposure periods and conditions. Total 21 cores in tendon room and chamber room were obtained, and the acid-soluble chlorides and compressive strength were evaluated for the structures containing construction period around 3 years. The test results like diffusion coefficient and surface chloride content from the construction joint and cracked area were also discussed with the considerations for maintenance.

• 비파괴검사학회지
• /
• 제23권5호
• /
• pp.520-525
• /
• 2003

Fast Breeder Test Reactor (FBTR) is a 40MW (thermal) / 13.2MW (electrical), Plutonium - Uranium mixed carbide fuelled, sodium cooled, loop type nuclear reactor operating at Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam. Its main aim is to generate experience in operation of fast reactors and sodium systems and to serve as an irradiation facility for development of fuels and structural materials fur fast reactors. Nuclear reactors pose difficulties to the NDT techniques used to monitor the conditions of the internal components. Sodium cooled fast breeder reactors have their own typical difficulties in using the NDT techniques. These are due to the need for operation in aggressive environment of nuclear radiation and sodium (molten/vapour), as well as the need to maintain leak tightness of a very high order during all states of reactor operation and shutdown for fuel handling, maintenance and remote inspection. This paper discusses the following NDT techniques, which have been successfully used for the past 15 years in FBTR: (i) Periscope and Projector, (ii) Core Co-ordinate Measuring Device and, (iii) Optical fiberscope. The inspection using these techniques have given confidence for further reactor operation at high power by giving useful data on the conditions of the components inside the reactor vessel.

• 한국정밀공학회지
• /
• 제30권5호
• /
• pp.544-551
• /
• 2013

Recently high speed mixer, which is mixing, grinding, dispersion for liquid-liquid material, has been widely used several industries such as food, cosmetics, pharmaceuticals, fine chemicals, electronic material. This high speed mixer has a core element part called particle separation device. Particle separation device, which makes mixed liquid and liquid material using shear forces from a rotor and a stator, is a decisive factor in the distributed parts. In this study, we examined the velocity distribution of the two models of particle separation device using computation fluid dynamics, so that we were able to see the difference of the velocity distribution according to the shape. Also, by experiment, we observed that the use of rotor-screen type is deemed more suitable in case of accurately considering the effect of improving of the dispersibility through the circulation of the future.

• 한국유통학회:학술대회논문집
• /
• 한국유통학회 2001년도 추계학술대회 발표논문집
• /
• pp.91-122
• /
• 2001

This paper's object is to study the Advanced Foreign's Third Party Logistics Trend & View at Global Logistics Times. So, I analysed the Advanced Foreign U.S. & EU and the results are as follows: First, a growth in the number of outsourcing relationships has contributed to the development of more flexible organizations, based on core competencies and mutually beneficial longer-term relationships. So, the development of logistics relationships has brought mixed results. Across many industries, logistics outsourcing is a rapidly expanding source of cost savings, competitive advantage, and customer service improvements. Thus, it appears that Third Party Logistics(TPL) concepts could be useful in meeting the goals of the 1ogistics function. Second, the field of logistics and supply chain management is becoming strategically important. At the same time, it is becoming increasingly complex because of the rapid advances in management methods, e-commerce, technology, and enabling information systems. However, Third Party Logistics provider, many a times, lack broad set of skills, integrating technologies, strategies and global reach. So, Fourth Party Logistics(4PL) is the next significant evolution in supply chain outsourcing. 4PL delivers a comprehensive supply chain solution, and delivers value through the ability to impact the entire supply chain. The 4PL industry is likely to grow as more companies use e-commerce at Global Logistics Times.

• 한국분말재료학회지
• /
• 제16권4호
• /
• pp.243-248
• /
• 2009

Carbon-coated Cu nanopowders with core/shell structure have been successfully fabricated by pulsed wire evaporation (PWE) method, in which a mixed gas of Ar/$CH_4$ (10 vol.%) was used as an ambient gas. The characterization of the samples was carried out using x-ray diffraction (XRD), scanning electron microscope (SEM), and high resolution transmission electron microscope (HRTEM). It was found that the nanoparticles show a spherical morphology with the size ranging of 10-40 nm and are covered with graphite layers of 2-4 nm. When oxygen-passivated Cu nanopowders were annealed under flowing argon gas (600 and 800$^{\circ}C$), the crystallinity of $Cu_2O$ phase and the particle size gradually increased. On the other hand, carbon-coated Cu nanopowders remained similar to as-prepared case with no additional oxide or carbide phases even after the annealing, indicating that the metal nanoparticles are well protected by the carbon-coating layers.

• 대한의용생체공학회:의공학회지
• /
• 제38권1호
• /
• pp.1-8
• /
• 2017

The successful synthesis of hyaluronic acid micro-threads is very promising approach for the broad application in tissue engineering such as dermal fillers. Because hyaluronic acid has the excellent biocompatibility and ability to maintain the moisture of up to several hundred times its own weight. In order to generate the hyaluronic acid micro-threads in microfluidic system, we employed two-phase flow microfluidic chip to make a rapid synthesis of the hyaluronic acid hydrogel. Hyaluronic acid was mixed with 0.02N NaOH solution and 1, 4-Butanediol diglycidyl ether (BDDE) solution and then injected into core channel. The ethanol was used for the 3-dimensional micro-thread formation in sheath channel. We manipulated the diameter of HA micro-threads using controlling of flow rates in microfluidic chip, and showed the feasibility of immobilization in HA micro-threads with florescent substances. Also, the generated HA micro-threads were evaluated and showed the suitable properties with tensile strength, bending property, and swelling profiles for dermal fillers. As a result, we suggested an innovative method for microfluidic chip-based HA micro-threads which could safely be applied as dermal filler in tissue engineering.