DOI QR코드

DOI QR Code

Chloride penetration in anchorage concrete of suspension bridge during construction stage

  • Yang, In-Hwan (Department of Civil Engineering, Kunsan National University) ;
  • Yoon, Yong-Sik (Department of Civil and Environmental Engineering, Hannam University) ;
  • Kwon, Seung-Jun (Department of Civil and Environmental Engineering, Hannam University)
  • 투고 : 2020.03.25
  • 심사 : 2020.06.10
  • 발행 : 2020.07.25

초록

Steel corrosion in embedded steel causes a significant durability problems and this usually propagates to structural degradation. Large-scaled concrete structures, PSC (Pre-stressed Concrete) or RC (Reinforced Concrete) structures, are usually constructed with mass concrete and require quite a long construction period. When they are located near to sea shore, chloride ion penetrates into concrete through direct or indirect exposure to marine environment, and this leads durability problems. Even if the structures are sheltered from chloride ingress outside after construction, the chloride contents which have been penetrated into concrete during the long construction period are differently evaluated from the initially mixed chloride content. In the study, chloride profiles in cores extracted from anchorage concrete block in two large-scaled suspension bridge (K and P structure) are evaluated considering the exposure periods and conditions. Total 21 cores in tendon room and chamber room were obtained, and the acid-soluble chlorides and compressive strength were evaluated for the structures containing construction period around 3 years. The test results like diffusion coefficient and surface chloride content from the construction joint and cracked area were also discussed with the considerations for maintenance.

키워드

과제정보

This research was supported by the National Research Foundation of Korea (NRF) (No. NRF2020R1A2C2009462) and also supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT & Future Planning (No. 2015R1A5A1037548).

참고문헌

  1. AASHTO T 260 (1997), Standard Method of Test for Sampling and Testing for Chloride Ion in Concrete and Concrete Raw Materials, American Association of State Highway and Transportation Officials, USA.
  2. Bamforth, P.B. (1999), "The derivation of input data for modelling chloride ingress from eight-years UK coastal exposure trials", Mag. Concrete Res., 51(2), 87-96. https://doi.org/10.1680/macr.1999.51.2.87.
  3. Berke, N.S. and Hicks, M.C. (1994), "Predicting chloride profiles in concrete", Corros., 50(3), 234-239. https://doi.org/10.5006/1.3293515.
  4. Broomfiled, J.P. (1997), Corrosion of Steel in Concrete: Understanding, Investigation and Repair, E&FN, London.
  5. Du, X., Jin, L. and Zhang, R. (2015), "Chloride diffusivity in saturated cement paste subjected to external mechanical loadings", Ocean Eng., 95, 1-10. https://doi.org/10.1016/j.oceaneng.2014.11.028.
  6. DuraCrete (2000), Final Technical Report-Probabilistic Performance Based Durability Design of Concrete Structures, Document BE95-1347/R17, European Brite-Euram, Gouda, Netherlands.
  7. Glasser, F.P., Marchand, J. and Samson, E. (2008), "Durability of concrete-Degradation phenomena involving detrimental chemical reactions", Cement Concrete Res., 38(2), 226-246. https://doi.org/10.1016/j.cemconres.2007.09.015.
  8. Huynh, T.C. and Kim, J.T. (2017), "Quantification of temperature effect on impedance monitoring via PZT interface for prestressed tendon anchorage", Smart Mater. Struct., 26(12), 1-19. https://doi.org/10.1088/1361-665X/aa931b.
  9. Ishida, T. and Maekawa, K. (2003), "Modeling of durability performance of cementitious materials and structures based on thermos-hygro physics", RILEM Proc-PRO29: Proceedings of the 2nd International RILEM Workshop on Life Prediction and Aging Management of Concrete Structures, Paris, France.
  10. JSCE (2002), Proposal of the Format for Durability Database of Concrete: Concrete Library 109, Japan Society of Civil Engineering, Tokyo.
  11. JSCE (2013), Standard Specification for Concrete Structures- Design; JSCE Guideline for Concrete 15, Japan Society of Civil Engineering, Tokyo.
  12. Kouloumbi, N., Batis, G. and Malalmi, C.H. (1994), "The Anticorrosive Effect of Fly Ash, Slag and a Greek Pozzolan in Reinforced Concrete", Cement Concrete Compos., 16(4), 253-260. https://doi.org/10.1016/0958-9465(94)90037-X.
  13. KS F 2714 (2017), Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete, Korea Standard Service Network, Korea.
  14. Kwon, S.J. (2015), "Evaluation of service life in RC column under chloride attack through field investigation: Deterministic and probabilistic approaches", J. Korea Inst. Struct. Maint. Inspect., 19(5), 67-74. https://doi.org/10.11112/jksmi.2015.19.5.067.
  15. Kwon, S.J., Na, U.J., Park, S.S. and Jung, S.H. (2009), "Service life prediction of concrete wharves with early-aged crack: Probabilistic approach for chloride diffusion", Struct. Saf., 31(1), 75-83. https://doi.org/10.1016/j.strusafe.2008.03.004.
  16. Lee, H.S., Yang, J.K. and Kwon, S.J. (2015), "Characteristics of chloride diffusion coefficient in RC column at tidal zone through field investigation", Constr. Environ. Res. Inst., 10(1), 7-16. https://doi.org/10.1080/2093761X.2017.1302831.
  17. Luping, T. and Gulikers, J. (2007), "On the mathematics of time-dependent apparent chloride diffusion coefficient in concrete", Cement Concrete Res., 37(4), 589-595. https://doi.org/10.1016/j.cemconres.2007.01.006.
  18. Maekawa, K., Ishida, T., Chijiwa, N. and Fujiyama, C. (2015), "Multiscale coupled-hygromechanistic approach to the life-cycle performance assessment of structural concrete", J. Mater. Civil Eng., 27(2), A4014003. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000984.
  19. Muthulingam, S. and Rao, B.N. (2016), "Chloride binding and time-dependent surface chloride content models for fly ash concrete", Front. Struct. Civil Eng., 10(1), 112-120. https://doi.org/10.1007/s11709-015-0322-x.
  20. Oslakovic, I.S., Bjegovic, D. and Mikulic, D. (2010), "Evaluation of service life design models on concrete structures exposed to marine environment", Mater. Struct., 43(10), 1397-1412. https://doi.org/10.1617/s11527-010-9590-z.
  21. Park, J.S., Yoon, Y.S. and Kwon, S.J. (2018), "Relations analysis between strength and time-parameter in high performance concrete containing GGBFS cured for 1 year", J. Korea Concrete Inst., 30(4), 375-381. https://doi.org/10.4334/JKCI.2018.30.4.375.
  22. Park, S.S., Kwon, S.J. and Jung, S.H. (2012), "Analysis technique for chloride penetration in cracked concrete using equivalent diffusion and permeation", Constr. Build. Mater., 29, 183-192. https://doi.org/10.1016/j.conbuildmat.2011.09.019.
  23. Petcherdchoo, A. (2018), "Closed-form solutions for modeling chloride transport in unsaturated concrete under wet-dry cycles of chloride attack", Constr. Build. Mater., 176, 638-651. https://doi.org/10.1016/j.conbuildmat.2018.05.083.
  24. Tadayon, M.H., Shekarchi, M. and Tadayon, M. (2016), "Long-term field study of chloride ingress in concretes containing pozzolans exposed to severe marine tidal zone", Constr. Build. Mater., 123, 611-616. https://doi.org/10.1016/j.conbuildmat.2016.07.074.
  25. Thomas, M.D.A. and Bamforth, P.B. (1999), "Modeling chloride diffusion in concrete: Effect of fly ash and slag", Cement Concrete Res., 29(4), 487-495. https://doi.org/10.1016/S0008-8846(98)00192-6.
  26. Thomas, M.D.A. and Bentz, E.C. (2002), Computer Program for Predicting the Service Life and Life-Cycle Costs of Reinforced Concrete Exposed to Chlorides, Life365 Manual, SFA, 2-28.
  27. Tuutti, K. (1982), "Corrosion of steel in concrete", CBI Report No. 4-82, Swedish Cement and Concrete Research Institute, Stockholm, Sweden.
  28. Tuutti, K. (1993), Effect of cement type and different additions on service life, In Concrete 2000, E&FN, London, UK.
  29. Yang, T., Yang, T., Guan, B., Liu, G., Li, J., Pan, Y., Jia, Y. and Zhao Y. (2019), "Service life prediction of chloride-corrosive concrete under fatigue load", Adv. Concrete Constr., 8(1), 55-64. https://doi.org/10.12989/acc.2019.8.1.055.
  30. Yoon, Y.S., Lim, H.S. and Kwon, S.J. (2019), "Evaluation of apparent chloride diffusion coefficient of fly ash concrete by marine environment exposure tests", J. Korea Inst. Struct. Maint. Inspect., 23(3), 1-8. https://doi.org/10.11112/jksmi.2019.23.3.119.
  31. Zhou, S. (2014), "Modeling chloride diffusion in concrete with linear increase of surface chloride", ACI Mater. J., 111(5), 483-490. https://doi.org/10.14359/51687160.

피인용 문헌

  1. Durability and mechanical performance in activated hwangtoh-based composite for NOx reduction vol.11, pp.4, 2020, https://doi.org/10.12989/acc.2021.11.4.307
  2. Investigation on compression properties of seawater-sea sand concrete vol.12, pp.2, 2020, https://doi.org/10.12989/acc.2021.12.2.093