• 제목/요약/키워드: Mixed Construction Waste

검색결과 128건 처리시간 0.028초

현장파쇄 재생골재의 동상방지층 및 빈배합 콘크리트 기층 시험시공연구 (Application of Recycled Aggregate in Job site as Anti-freezing and Lean Concrete Base Materials)

  • 김진철;심재원;조규성;최고일
    • 한국도로학회논문집
    • /
    • 제6권4호
    • /
    • pp.25-33
    • /
    • 2004
  • 고속도로 건설 및 유지관리 과정중 발생되는 폐콘크리트를 현장파쇄하여 생산한 재생골재를 도로 포장용 재료로 활용하기 위한 시험시공을 실시하였다. 동상방지층의 경우 재생굵은골재, 스크리닝스 및 모래를 소요입도로 혼합하였을 때 양호한 지지력을 나타내었으며 강도가 약한 모르터가 진동 및 전압에 의해 파쇄됨에 따라 재생골재 2$\sim$20mm 통과율이 5$\sim$13%정도 증가하였다. 재생골재를 사용한 빈배합 콘크리트의 강도는 천연쇄석에 비하여 71$\sim$85% 강도를 나타내었으나 배합강도 $57.5kgf/cm^2$를 크게 상회하였으므로 현장적용에는 문제없음을 확인하였다.

  • PDF

High Volume Slag를 사용한 저탄소 콘크리트의 역학 및 내구특성 (Dynamic and Durability Properties of the Low-carbon Concrete using the High Volume Slag)

  • 문지환;이상수
    • 한국건축시공학회지
    • /
    • 제13권4호
    • /
    • pp.351-359
    • /
    • 2013
  • 고로슬래그는 콘크리트의 적용시 효율적인 가치향상과 관련하는 많은 장점도 있으나, 고로슬래그의 사용량 증대에 따른 부작용도 나타나고 있다. 따라서 고로슬래그 미분말의 활용성 증대를 위해 High Volume Slag를 자극제 종류별, 치환율별, 조강제 혼입율별, NaOH, $Na_2SiO_3$ 혼합사용시, 폐알칼리자극제 혼입율별 특성을 알아보기 위해 실험하였다. 실험결과, 압축강도의 경우 수산화나트륨을 제외한 모든 알칼리자극제에서 치환율이 증가함에 따라 강도가 증진되었다. 알칼리자극제 중 규산나트륨이 동탄성계수와 흡수율 등에서 높게 나타났으며, 조강제의 경우 혼입율 1.5%와 고로슬래그 치환율 75%가 높은 강도증진을 나타내었다. 폐알칼리 자극제의 경우 모든 실험에서 각기 다른 결과를 나타내었다.

폐목재파티클을 이용한 재생보드의 제조특성 (Manufacturing Characteristics of Boards Recycling Waste Wood Particle)

  • 김외정;서진석;한태형;박종영
    • 한국건설순환자원학회논문집
    • /
    • 제2권1호
    • /
    • pp.120-127
    • /
    • 2006
  • 폐목질원료로서, 제재, 합판, PB, MDF와 폐침목 등의 해머밀에 의한 파쇄특성과 재생파티클 종류와 혼합비율에 따른 재생보드의 물성을 구명함으로써, 보드원료로서 재자원화 하는 방안을 모색해 보고자 하였다. 그 결과, 재생보드의 휨성질은 목질원료의 입자형태 및 입도분포에 크게 영향을 받으며, 파티클, 섬유와 같은 element가 압축고화된 상태의 판넬(PB, MDF)로부터 재생한 파티클은 물성저하를 초래하였다. 그러나, 재생파티클에 이미 도포 경화된 수지에 의해 재생보드의 치수안정성이 향상되는 효과가 있다. 따라서, 보드원료로서의 적합한 요건은 건전폐목재(제재, 합판)와 저급폐목재(PB, MDF)의 적정한 혼용에 있다고 할 수 있다. 본 연구에서는 건전폐목재 재생파티클과 재생 PB파티클의 혼용시험에서 제재파티클이 휨성질(MOR, MOE)과 박리강도에 기여하고, 합판파티클은 치수안정성에 더욱 기여하는 경향을 나타냈다. 또한 보드의 중층용 원료로 재생PB파티클의 혼합비율을 증가함에 따라서 보드의 휨성능이 감소되는 경향을 나타냈지만 혼합률 40%까지는 유의차가 없이 보드 15형(MOR : $153kgf/cm^2$, MOE : $27.5tonf/cm^2$) 수준의 성능이 구비되었다. 향후 생활폐목재(폐가구 등)와 같은 저급폐목재의 활용방안이 강구된다면 보드원료의 수급에 한층 기여할 수 있을 것이다.

  • PDF

레미콘 슬러지를 활용한 콘크리트블록 활용에 대한 기초 연구 (A Study on the Possibility of Using Concrete Blocks with Ready Mixed Concrete Sludge)

  • 정재호
    • 한국건축시공학회지
    • /
    • 제19권4호
    • /
    • pp.307-312
    • /
    • 2019
  • 레미콘 제조 시 발생되는 슬러지는 폐기물로 분류되어 높은 비용을 지불하며 처리를 하고 있다. 특히 중소레미콘 업체에서는 이 비용이 큰 부담으로 작용되며, 일부 업체에서는 불법적인 처리가 발생되고 있는 실정이다. 따라서 본 연구에서는 레미콘슬러지를 콘크리트블록용 조성물로 재활용하는 방법을 제시 하는데 그 목적이 있다. 레미콘슬러지를 단순 건조하여 사용 하였을 때에는 슬러지에 포함된 잔류화학혼화제와 에트린가이트가 존재하여 콘크리트블록의 압축강도, 동결융해 후 압축강도 물리적성능이 크게 떨어져 콘크리트호안 및 옹벽블록의 품질기준을 만족하지 못하는 것으로 나타났다. 물리적 성능을 만족시키기 위한 방법으로 레미콘슬러지를 $900^{\circ}C$정도의 고온에서 소성시켜 에트린가이트와 잔류 화학혼화제 등을 분해시킨 후 사용하는 것이 우수한 것으로 나타났다.

도로성토재료로서 폐기물 매립장 선별토사의 활용 (Utilization of Selected Landfill Waste Soils for Road Embankment Materials)

  • 김영수;정성관;최병학;이상웅
    • 한국지반환경공학회 논문집
    • /
    • 제4권1호
    • /
    • pp.29-39
    • /
    • 2003
  • 본 연구의 목적은 폐기물 매립장 선별토사를 도로성토재료로 재활용하기 위해 매립장 주변의 오염되지 않은 토사A 및 토사B와 혼합비를 달리하였을 때 다짐, 전단, CBR 시험 등을 실시하여 도로성토재료로서 재활용하기 위한 기초자료를 제공하는 것이다. 다짐시험결과 일반토사의 혼합비가 증가할수록 최대건조밀도는 증가하고 최적함수비는 감소하였으며, 직접전단시험 결과 토사A를 혼합하였을 경우에는 점착력의 변화가 크게 나타났고 토사B를 혼합한 경우에는 내부마찰각의 변화가 크게 나타났다. 또한, CBR 시험을 실시한 결과 토사A의 경우 혼합비가 50%이상일 때에는 상부노상재료로 활용가능한 것으로 나타났고, 토사B의 경우 혼합비가 30%이상일 때 상부노상재료로 활용가능한 것으로 나타났다.

  • PDF

임목폐기물의 현장 재활용을 위한 퇴비화기술 (The Composting Techniques for On-site Recycling of Wood Waste)

  • 허영진;고정현;주백;안태영
    • 한국환경복원기술학회지
    • /
    • 제12권4호
    • /
    • pp.72-80
    • /
    • 2009
  • The main purpose of this study is as follows : Finding a solution for fresh wood chips to be used as an alternative growing-media through a study of the formation method of a compost base that is applicable on both construction site and composting factory to ferment fresh wood chips produced from construction site as well as a study on adjuvant or secondary materials. The result from the experiment plot using wood chips sized 50mm or less, manure and fertilizer mixed manure as a source of nitrogen to compost fresh wood chips has shown that the temperatures 9days and 3days after the beginning of the experiment reached to $49.0^{\circ}C$ and $40.4^{\circ}C$ respectively, the heating duration was 7days and 4days respectively, and the C/N ratio was 26.5 and 25.3, each satisfying the standard for composted manure (25.0~40.0). Also, the other result from another experiment plot using mixture of sandy soil and microorganism as an inoculation source of microorganism has shown that the temperature 10days after the beginning of the experiment reached to $67.6^{\circ}C$ and lasted 16days. The experiment plot using sandy soil has shown the highest figure of $5.3{\sim}108$ CFU/g in terms of number of microorganism. The result from the experiment plots for on-site composting of fresh wood chips have shown that the experiment plot that used sandy soil with fertilizer due to supply restriction of manure as a nitrogen source in construction site reached the high temperature of $54.7^{\circ}C$ after 3days of experiment beginning and maintained heating state for 17days and reached 30.6 of C/N ratio, satisfying the standard for composted manure.

순환골재를 이용한 환경 친화형 호안 블록제품의 개발에 관한 연구 (Study on the development of environment-friendly tetrapod using recycled aggregate)

  • 박도경;이명규;양극영
    • 한국건축시공학회지
    • /
    • 제6권2호
    • /
    • pp.73-79
    • /
    • 2006
  • The purpose of this study is to enhance the development of construction waste-recycling technologies and its economical efficiency by developing environment-friendly tetrapod, precast concrete, where recycled aggregate is used in order to promote recycling of waste concrete. The results of concrete mechanic characteristics experiments by the circulation coarse aggregate-replacement ratio are as the following. The circulation aggregate is lower and higher than natural aggregate in specific gravity and absorption ratio, respectively so that in case of mix proportioning, unit volume increases, while unit aggregate amount decreases. From the result, sufficient experiments of physical characteristics of circulation aggregate are required to get proper mix proportioning. When circulation aggregate-replacement ratio increases, compressive strength tends to decrease comprehensively, but 50% of replacement ratio is good enough to use. When circulation coarse aggregate's replacement ratio is 0%, drying shrinkage, which causes cracks in concrete and deteriorates durability, shows the minimum length change and the higher the ratio, the larger the length change. Thus. when using circulation coarse aggregate, drying shrinkage should be fairly examined. In freezing-and-thawing resistance, weight loss tends to comprehensively increase its loss at the circulation aggregate-mixed site. And the examination of surface aggregate-omission ratio is further needed and dynamic elastic modulus and durability factor(DF) require more study as well. In order to use circulation aggregate to tetrapod, a clear standard for strength should be first prepared and at the same time, more study about durability is needed.

강섬유 혼입 순환골재 콘크리트의 역학적 특성에 관한 연구 (A Study on the Mechanical Properties of Recycled Aggregate Concrete Mixed Steel Fiber)

  • 신용석;조철희;김대성;김정섭
    • 한국건축시공학회지
    • /
    • 제9권4호
    • /
    • pp.131-137
    • /
    • 2009
  • 건설 폐기물의 대부분을 차지하는 폐콘크리트를 처리하여 재활용하는 비율이 증가하고 있다. 하지만 재활용 골재의 낮은 품질로 인한 부정적 인식과 압축강도, 휨강도, 전단강도, 동결융해 저항성, 연성 등의 낮은 강도특성 때문에 순환골재를 구조물에 활용사례가 미비한 실정이다. 따라서 본 연구에서는 순환골재 콘크리트의 성질 개선을 목적으로 강섬유를 혼입하여 재료실험과 부재실험을 하였으며, 그 결과는 다음과 같다. 각종 실험결과를 종합한바, 강섬유 혼입 순환골재 30% 실험체는 기준실험체와 동등이상의 압축강도, 인장강도, 전단내력, 동결융해 저항성을 갖는 것으로 나타나, 순환골재 치환율 30%까지는 실제 구조물에 대한 적용이 가능할 것으로 사료된다.

비정형 형상구현을 위한 혼합모르타르 패널의 오차율 분석 연구 (A Study on the Analysis of the Error Rate of Mixed Mortar Panel for Implementation Free-form Shape)

  • 오영근;정경태;이동훈
    • 한국건축시공학회지
    • /
    • 제20권2호
    • /
    • pp.155-162
    • /
    • 2020
  • 본 연구에서는 비정형 패널 제작 기술력 향상을 위한 기초적인 연구로 비정형 패널의 오차율을 분석하였다. 이에 본 연구에서는 우선적으로 비정형 패널 제작시 매끄러운 형상을 표현하기 위해 콘크리트 대신 혼합모르타르를 사용하여 적정 배합비를 도출하였다. 그 후 도출한 배합비를 적용하여 비정형 패널을 CNC장비를 통해 제작하였으며 패널의 오차율을 분석하였다. 본 연구에서는 두 가지의 배합을 선정하였으며 선정한 첫 번째 배합은 혼합시멘트 페이스트 배합, 두 번째 배합은 혼합모르타르 배합이었다. 실험결과 두 배합모두 품질적 측면에서 만족하는 정량적 수치를 보였다. 하지만 두 배합모두 양생하는 방법에 차이를 두었고 이로 인해 오차가 발생했다. 이를 통해 오차율은 사용재료의 특성과 재료 간 화학반응의 문제보다는 패널을 양생하는 방법에 따라 더 많은 영향을 끼치는 것으로 판단하였다. 본 연구는 현재 기초적인 연구수행으로 추후 본 연구를 토대로 추가적인 연구를 진행한다면 콘크리트 타설시 흘러내림을 방지하는 방안과 오차율을 줄일 수 있는 양생방법을 찾는 연구가 함께 병행되어야 한다. 위와 같은 연구수행을 통해 비정형 패널 제작에 대한 연구 및 개발에 기여할 수 있으며 나아가 비정형 건축시장에서 경쟁력을 확보할 수 있다.

Influence of EDZ on the Safety of a Potential HLW Repository

  • 황용수;강철형
    • 방사성폐기물학회지
    • /
    • 제2권4호
    • /
    • pp.253-262
    • /
    • 2004
  • Construction of tunnels in a deep crystalline host rock for a potential High-Level Radioactive Waste(HLW) repository inevitably generates an excavation disturbed zone (EDZ). There have been a series of debates on whether a permeability in an EDZ increases or not and what would be the maximum depth of an EDZ. Recent studies show mixed opinions on permeability. However, there has been an international consensus on the thickness of an EDZ; 30 cm for TBM and 1 meter for controlled blast. One of the impacts of an EDZ is on determining the distance between adjacent deposition holes. The void gap by the excavation hinders relaxation of temperature profiles so that the current Korean reference designing distance between holes should be stretched out more to keep the maximum temperature in a buffer region below 100 degrees Celsius. The other impact of an EDZ is on the long-term post closure radiological safety. To estimate the impact, the reference scenario, the well scenario, is chosen. Released nuclides diffuse through a bentonite buffer region experiencing strong sorption and reach a fracture surrounded by a porous medium. Inside a fractured porous region, radionuclides migrate by advection and dispersion with matrix diffusion into a porous medium. Finally, they reach a well assumed to be a source of potable water for local residents. The annual individual dose is assessed on this well scenario to find out the significance of an EDZ. A profound sensitivity study was performed, but all results show that the impact is negligible. Even though the role of an EDZ turns out to be limited on overall safety assessment, still it is worthwhile to study the chemical role of an EDZ, such as a potential source for natural colloids, potential sealing of an open fracture by fine clay particles generated by the process of an EDZ, and alteration of a sorption mechanism by an EDZ in the future.

  • PDF