• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1532-1548
• /
• 2008

The tunnel type spillways is under construction to increasing water reservoir capacity in Dae-am dam. The tunnel outlet was planned to be made after installing slope stabilization system on natural slope there. Generally, the tunnel outlet is made perpendicularly to the slope, but in this case, it had to be made obliquely to the slope for not interrupting flow of river. Because of excavation in condition of natural slope caused to deflecting earth pressure, the outlet couldn't be made. So, artificial ground made with concrete that it was constructed in the outside of tunnel for producing the arching effect which enables to make a outlet. We were planned tunnel excavation was carried out after artificial ground made. Artificial ground made by poor mix concrete of which it was planned that the thickness was at least 3.0m height from outside of tunnel lining and 30cm of height per pouring. Spreading and compaction was planned utilized weight of 15 ton roller machine. In order to access of working truck, slope of artificial ground was designed 1:1.0 and applied 2% slope in upper pert of it for easily drainage of water. In addition to, upper pert of artificial ground was covered with soil, because of impaction of rock fall from upper slope was made minimum. The tunnel excavation of the artificial ground was designed application with special blasting method that it was Super Wedge and control blasting utilized with pre-percussion hole.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.154-154
• /
• 2008

Although the screen printing technology using photosensitive carbon nanotube (CNT) paste has many advantages such as low cost, simple process, uniform emission, and capability of mass production, the CNT paste needs to be improved further in CNT dispersion, printability, adhesion, electrical conductivity, population of CNT emitters, etc. Ball milling has been frequently employed to prepare the CNT paste as ball milling can mix its ingredients very well and easily cut the long, entangled CNTs. This study carried out a parametric approach to fabricating the CNT paste in terms of low-energy ball milling and a paste composition. Field emission properties of the CNT paste was characterized with CNT dispersion and electrical conductivity which were measured by a UV-Vis spectrophotometer and a 4-point probe method, respectively. Main variables in formulating the CNT paste include a length of milling time, and amounts of CNTs and conductive inorganic fillers. In particular, we varied not only the contents of conductive fillers but also used two different sizes of filler particles of ${\mu}m$ and nm ranges. Among many variations of conductive fillers, the best field emission characteristics occurred at the 5 wt% fillers with the mixing ratio of 3:1 for ${\mu}m$-and nm-sizes. The amount and size of fillers has a great effect on the morphology, processing stability, and field emission characteristics of CNT emitter dots. The addition a small amount of nm-size fillers considerably improved the field emission characteristics of the photosensitive CNT paste.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1505-1515
• /
• 2009

A new method to semicontinuously determine $PM_{2.5}$ ionic species with a short time resolution is described in detail. In this system, a particle collection section (mixing part, particle collection chamber, and air/liquid separator) was developed. A Y-type connector was used to mix steam and an air sample. The particle collection chamber was constructed in the form of a helix coil and was cooled by a water circulation system. Particle size growth occurred due to the high relative humidity and water absorbed particles were efficiently collected in it. Liquid samples were drained out with a short residence time (0.08-0.1 s). The air/liquid separator was also newly designed to operate efficiently when the flow rate of the air sample was 16.7 L $min^{-1}$. For better performance, the system was optimized for particle collection efficiency with various types of test aerosols such as ($NH_4)_2SO_4,\;NaCl,\;NH_4HSO_4,\;and\;NH_4NO_3$. The particle collection efficiencies were almost 100% at different concentration levels in the range over 500 nm in diameter but 50-90% in the range of 50-500 nm under the following experimental conditions: 15 coil turns, a water flow rate for steam generation of 0.65 mL $min^{-1}$, and an air sample flow rate of 16.7 L $min^{-1}$. Finally, for atmospheric applications, chemical compositions of $PM_{2.5}$ were determined with a time resolution of 20 min on January 11-24, 2006 in Seoul, Korea, and the chemical characteristics of $PM_{2.5}$ ions were investigated.

• 디지털콘텐츠학회 논문지
• /
• 제14권1호
• /
• pp.35-40
• /
• 2013

연마재와 Coolant를 이용한 슬러리는 그동안 반도체 웨이퍼를 시작으로 태양광 산업의 Wire Saw에서 사용량이 급격히 증가하였다. 이에 본 논문에서는 슬러리를 분리 정제하여, 수세뿐만 아니라 화학적 처리를 통하여 보다 고순도의 실리콘카바이드 분말을 얻어, 마이크로웨이브 건조방식으로 건조하였다. 건조한 슬러리 벌크를 분쇄하고 화학적 처리까지 수행하여 제작한 Powder를 각각 열분석, 입도분석, SEM 촬영, 성분분석, XRF, XRD을 통하여 분석하였다. 본 연구 결과 화학적 처리를 통하여 얻은 Powder의 회수율이 수세 처리를 통하여 얻은 Powder 보다 더 높아지는 것을 알 수 있었다. 태양광 소재 산업에서 발생하는 다량의 슬러리를 통합, 재활용함으로 점차 강화되고 있는 국내외 환경 규제에 적극 대응하고, 관련 소재 산업의 인프라 구축 효과를 기대할 수 있다.

• 패션비즈니스
• /
• 제24권1호
• /
• pp.1-14
• /
• 2020

Based on the trend of pluralization and globalization the collapse of national borders now is a manifestation of mixed and compromised cultures and societies. It is also emerging as a hybrid fashion in fashion. Hybrid fashion means creating a new image by mixing various cultures beyond the time and space. This study aims to analyze the current state of Chinese fashion design and present its direction by grasping the characteristics of hybrids in the works of rising Chinese fashion designers in the era of pluralization. The research method was literature review and empirical research. According to the selection criteria of new fashion designers, 6 new fashion designers of 5 fashion brands were selected and their total 458 points works were analyzed. The analysis results are as follows. First, most of the time trade-offs were 'past and present' trade-offs that express Chinese traditional culture and the image of the past with modern design. The trade-offs between 'present and future' is expressed by mixing print patterns, colors and light with fractal art. Second, spatial trade-offs was expressed in the way of expressing Chinese themes in the composition of western clothing, expressing the Western themes in oriental colors, and inspired by Japanese culture expressed by deconstructionism, Third, the gender mix mainly used dark embroidery on women's clothing, while the men's wear showed a delicate feminine charm with a surreal pattern on thin and transparent gauze fabric.

• 한국수소및신에너지학회논문집
• /
• 제30권6호
• /
• pp.567-577
• /
• 2019

Due to the depletion of fossil fuels and environmental pollution, demand for alternative energy is gradually increasing. Among the various methods, a method to convert biomass into alternative fuel has been proposed. The bio-fuel obtained from biomass through pyrolysis process is called pyrolysis oil (PO) or bio-oil. Because PO is difficult to use directly in conventional engines due to its poor fuel properties, various methods have been proposed to upgrade pyrolysis-oil. The simplest approach is to mix it with conventional fossil fuels. However, due to their different polarity of PO and fossil fuel, direct mixing is impossible. To resolve this problem, emulsification of two fuels with a proper surfactant was proposed, but it costs additional time and cost. Alternatively, the use of alcohol fuels as an organic solvent significantly improve the fuel properties such as fuel stability, calorific value and viscosity. In this study, blends of diesel, n-butanol, and coffee ground pyrolysis oil (CGPO) which is one of the promising PO, was applied to diesel generator. Combustion and emissions characteristics of blended fuels were investigated under the entire load range. Experimental results show that ignition delay is similar to that of diesel at high load. Although, hydrocarbon and carbon monoxide emissions are comparable to diesel, significant reduction of nitrogen oxides and particulate matter emissions were observed.

• 한국융합학회논문지
• /
• 제6권2호
• /
• pp.37-42
• /
• 2015

오늘날 지구는 환경오염이 심해짐에 따라 여러 가지 자연 재해 때문에 실제 사용할 수 있는 수자원이 점차 고갈되어 가고 있어 그 수자원을 절약할 수 있는 방법이 필요한 때이다. 본 연구는 욕실용 수전 모델들의 내부에서의 유동 해석을 하여 속도 및 온도 분포들을 분석하였다. Model 3가 Model들 중 혼합 후의 온도가 가장 균일하게 나타나고, Model 3는 가장 낮은 속도 분포를 가지고 있고 혼합을 위한 공간이 가장 커서 물의 배출속도에 가장 많은 영향을 줌으로서 물을 아낄 수 있다고 보인다. 본 연구 결과를 이용하여 여러 가지 모양의 공간을 만들어 더욱 혼합이 잘 이루어지게 하여 그 물을 아끼는 욕실용 수전 모델의 개발에 활용될 수 있다고 사료된다. 또한, 디자인 면에서 융합 기술로의 접목도 가능하여 미적인 감각을 나타낼 수 있다.

• 한국의상디자인학회지
• /
• 제9권3호
• /
• pp.59-73
• /
• 2007

The purpose of this study is to find out the promotion methods for successful management of 'the fashion saho internet shopping mall' with a small capital. This study analyze the research reports, the news items, the documents on the internet shopping mall and data on promotion method which are offered by the hosting companies of the internet shopping mall like 'Cafe 24', 'Make shop', 'Whoismall' and the promotion consulting companies like 'Whoisad', 'Naver keyword shop'. And also analyze the data that interviewed the administrator of internet shopping mall and directly observed the famous internet shopping mall sites. Generally speaking, the promotion mix, marketing communication program can classify 'advertisement', 'publicity', 'personal selling', and 'sales promotion'. This study analyze the research materials on the basis of advertisement, publicity, personal selling, and sales promotion. The result are as follows. 1. The promotion methods at the stage of information the shopping mall site to the consumer are advertisement, and publicity. ${\bigcirc}$ The methods of advertisement are 'searching engine registration', 'advertisement of key word', 'advertisement of overture', 'advertisement of banner', 'advertisement cooperation marketing', 'advertisement of e-mail'. ${\bigcirc}$ The methods of publicity are using 'cafe', 'blog', 'Naver information site', 'community bulletin board', 'the fashion magazine or a press report' and 'cosponsorship'. 2. The main promotion methods at the stage of inducing the purchase are 'personal selling', and various 'sales promotion'. ${\bigcirc}$ 'Personal selling' at the shopping mall have an effect on the communication at bulletin board over the internet and the telephone. ${\bigcirc}$ 'Sales promotion' are attempted by 'VMD', 'deposit system', 'sale', etc.

• Computers and Concrete
• /
• 제20권4호
• /
• pp.491-502
• /
• 2017

In this research, the application of ultrasonic pulse velocity (UPV) test as a nondestructive method for estimating some of the mechanical and dynamic properties of reactive powder concrete (RPC) containing steel and polyvinyl alcohol (PVA) fibers, as well as their combination was explored. In doing so, ten different mix designs were prepared in 19 experimental groups of specimens containing three different volume contents of steel fibers (i.e., 1, 2, and 3 %) and PVA fibers (i.e., 0.25, 0.5, and 0.75 %), as well as hybrid fibers (i.e., 0.25-0.75, 0.5-0.5, and 0.75-0.25 %). The specimens in these groups were prepared under the two curing regimes of normal and heat treatment. Moreover, the UPV test results were employed to estimate the compressive strength, dynamic modulus, shear modulus, and Poisson's ratio of the RPC concrete and to investigate the quality level of the used concrete. At the end, the effect of the specimen shape and in fact the measuring distance length on the UPV results was explored. The results of this research suggest that the steel fiber-containing RPC specimens demonstrate the highest level of ultrasonic pulse velocity as well as the highest values of the mechanical and dynamic properties. Moreover, heat treatment has a positive effect on the density, UPV, dynamic modulus, Poisson's ratio, and compressive strength of the RPC specimens, whereas it leads to a negligible increase or decrease in the shear modulus and static modulus of elasticity. Furthermore, the specimen shape affects the UPV of fiber-lacking specimens while negligibly affecting that of fiber-reinforced specimens.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.167-170
• /
• 2001

The stochiometric mix of evaporating materials for the CdGa$_2$Se$_4$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, CdGa$_2$Se$_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were 630$^{\circ}C$ and 420$^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of CdGa$_2$Se$_4$ single crystal thin films measured from Hall erect by van der Pauw method are 8.27x10$\^$17/ cm$\^$-3/, 345 $\textrm{cm}^2$/V$.$s at 293 K, respectively. From the Photocurrent spectrum by illumination of perpendicular light on the c-axis of the CuInSe$_2$ single crystal thin film, we have found that the values of spin orbit splitting ΔSo and the crystal field splitting ΔCr were 106.5 meV and 418.9 meV at 10 K, respectively. From the photoluminescence measurement on CdGa$_2$Se$_4$ single crystal thin film, we observed free excition (E$\_$X/) existing only high quality crystal and neutral bound exiciton (D$\^$0/,X) having very strong peak intensity. Then, the full-width-at-half-maximum(FWHM) and binding energy of neutral donor bound excision were 8 meV and 13.7 meV, respectivity. By Haynes rule, an activation energy of impurity was 137 meV,