Browse > Article
http://dx.doi.org/10.15207/JKCS.2015.6.2.037

Study on Convergence Technique through the Flow Analytical Study inside the Faucet for Bathroom  

Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju University)
Publication Information
Journal of the Korea Convergence Society / v.6, no.2, 2015 , pp. 37-42 More about this Journal
Abstract
Nowadays, as the environmental pollution becomes severe on the earth, the water resource which can be used practically is dried up because of the natural disaster. And so, this is the time to be necessary to have the method for saving the water resource. This study investigates the distributions of velocity and temperature by the flow analysis inside the faucet models for bathroom. Model 3 has the most uniform distribution of temperature after mixing among all models. As model 3 has the smallest velocity distribution and the biggest space to mix by comparing the other models, it is seen to have the most influence on the discharged velocity of water and save the water. As the space of various configuration inside faucet model for bathroom is made by using the result of this study, it is thought to utilize at the development of this model in which more mixing becomes and the water can be saved. And it is possible to be grafted onto the convergence technique at design and show the esthetic sense.
Keywords
Faucet model for bathroom; Flow Analysis; Space; Discharged velocity; Convergence technique;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 J. U. Cho, M. S. Han, "Structural Durability Analysis According to the Thickness of Bicycle Frame Tube", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 122-129, 2012
2 Moonsik Han, Jeaung Cho, "Study on Bike Frame due to Nonuniform Fatigue Loads", Transaction of KASE, Vol. 20, No. 3, pp. 133-140, 2012
3 T, K, Lee, B, S, Kim, "The structure of an Automotive Woofer Speaker", Journal of Korean Society of Mechanical Technology, Vol. 14, No. 2, pp. 19-24, 2012.
4 HSIESH, C. T. and JANG, J. Y. "3-D thermal - hydraulic analysis for airflow over a radiator and engine room. "Int. J of automotive technology, Vol. 8, No. 5, pp 659-666, 2007.
5 J. S. Lee, "Design Parameters for Supporting Frame in a Twist screen", Journal of Korean Soc. of Mechanical Technology, Vol. 15, No. 2, pp. 85-91, 2013
6 J. H. Kim, I. S. Jung, J. M. Seo, N. K. Hur and J. H. Jung. "An investigation on development of bus electrical cooling fan system", Journal of Korean Society for New and Renewable Energy, pp. 144.1-144.1, 2010.