• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.10
• /
• pp.28-37
• /
• 2011

Though Korea has introduced CBP(Cost Based pool) power trading system since 2001, long-term Generation system planning has been executed by government for Cost minimization every 2 years. Until currently the model which is used for Generation system planning and best-mix only considers cost minimization and total yearly or quarterly electricity demand every year. In a view point of one day power supply operation, technical characteristics, like the ramp up/down rate of total generation system, minimum up/down time and GFRQ(Governor Free Response Quantity), are very important. this paper analyzes Optimal Fuel-Mix for 2022 Korea generation system satisfying these constraints of each fuel type and considering pump storage plants, construction cost and $CO_2$ emission charge Using MILP(Mixed Integer Linear Programming) method. Also the sensitivity analysis which follows in future power industry environmental change accomplished.

• Journal of Korean Society for Quality Management
• /
• v.42 no.4
• /
• pp.579-590
• /
• 2014

Purpose: Ball milling is a popular process for obtaining fine powders in the part and material industry. One of important issues in the ball milling is to produce particles with a uniform size. Although many factors affect uniformity of particles, this paper focuses on the choice of ball diameter. Consider a ball milling where balls can be taken with three different diameters. The purpose of this paper is to find a ball mix which minimizes the average particle size. Methods: Ball diameters are selected as 10mm, 3mm, and 0.5mm. In order to find an optimum mixing ratio, the method of mixture experiments is employed in this paper. Taguchi's signal-to-noise ratio (SNR) for smaller-the-better type is also used to analyze experimental data. Results: According to the experimental result, SNR is maximized when the ball mix is taken as either 7:3:0 or 6:4:0. Such mixing ratios can be technically validated in terms of porosity reduction. Conclusion: The ball mixing technique presented in this paper provides a useful way to improve the production efficiency with a low cost.

• Journal of Korean Society for Quality Management
• /
• v.47 no.3
• /
• pp.641-659
• /
• 2019

Purpose: Recently, the managing customer complaints properly has emerged as key source of competitive advantage in the large distribution industry. Effective customer complaint management helps firms minimize service failures and incense the capability to respond to customer's needs. Despite this importance, the in-depth prior study of a firm's service failures is very limited. Therefore, the actual service failure cases of large discount stores in Korea were analyzed in this study, and the types of service failures that occur at the service interface were identified. Method: Specifically, a total of 48,307 cases of customer complaints that have occurred in the past three years were collected from 1 January 2016 to 31 December 2018. Using 7 dimensions of service marketing mix. we have classified and analyzed systematically the service failure cases collected. Results: Among the cases of service failures, 34,921 (72.3%) cases were involved with the product factor, followed by 6,152 (12.7%) cases with person factor and 5,392 (11.2%) cases with process factor. Conclusion: By linking the main causes of service failure with the service marketing mix variables, this research presented a more systematic analytic model and verified by applying it to large domestic distribution company. Understanding the main factors affecting customer complaints n the large distribution industry can provide managers useful information and insight who want to achieve an effective customer complaint management.

• Magazine of the Korea Concrete Institute
• /
• v.4 no.4
• /
• pp.149-160
• /
• 1992

콘크리트 압축강도가 설계의 규준이 될 경우 배합비를 결정하는 방법은 여러 가지가 있으나, 파괴에너지 및 탄성계수와 같은 규준이 주어질 경우 배합비 결정에 적용하는 방법은 거의 없다. 이를 위하여 본 연구는 콘크리트 재료성질의 관계에 관한 배합설계도(Mix design diagram)를 제안하였다. 이 방법은 시멘트량, 물-시멘트 비가 콘크리트의 압축강도, 탄성계수, 할렬인장강도, 파괴에너지 그리고 콘크리트 특성길이(Characteristic length)에 주는 영향을 실험에 의하여 규명하였다. 시편제작을 위하여 각기 다른 물-시멘트비와 워커빌리티를 갖는 6종류의 무근콘크리트 배합이 사용되었다.

• Proceedings of the KIEE Conference
• /
• 2007.11b
• /
• pp.23-25
• /
• 2007

In this paper an estimation method is proposed to find reasonable load factor of the power system based on the conventional generation mix concept. To find the factor investment costs and operation costs are considered in the estimation. To use feasible results both supply side and demand side of views should be considered. But as a first step of this study only the generation mix is considered in this study.

• Journal of Ginseng Research
• /
• v.8 no.1
• /
• pp.1-7
• /
• 1984

In order to confirm the antimutagenicity of ginseng extracts, mutagenicity of ginseng and several medicinal herbs of which extracts were used as drinks, was examined through the method of Ames test. The obtained results were as follows. 1. Strong mutagenicities for Salmonella tyhimurium TA98, TA100, TA1535 were observed in all sample herbs Paenonia aalbiflora, Rehmannia glutinosa, Astragalus membranaceus, Angelica acutiloba, Cnidium officinale, Laurus nobilis and Panax ginseng without S-9 mix metabolic activation. 2. In the case of S-9 mix metabolic activation, even in a low concentraction, the extracts of Angelica autilobu, Cnidium officinale and Paenonla albtilora showed also a high mutagenicities for the strain TA98 and TA1535. 3. Even in high concentration of ginseng extracts, mutagenicity was almost neglectable through the metabolic activation of S-9 mix, compared with other extracts of medicinal herbs.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.313-318
• /
• 1999

This study is basic research to improve quality of asphalt concrete mixture, to preserve environment, and to recycle waste vinly. The mixing method and proper content of waste vinyl were determined through preliminary mix design. This study performed mix designs using 2 type gradations of aggregate in addtion content of wate vinly. Marshall stability at optimum asphalt content of asphalt concrete mixture addtin wate vinly was satisfied with the specification of the Ministry of Construction and Transportation , and its values indicated that dense grade asphalt concrete mixture containing waste vinyl were higher than common dense grade mixture (control). From this study, it was confirmed that addtion of waste vinyl improved quality of asphalt concrete mixture.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.10a
• /
• pp.283-289
• /
• 1996

In this paper, the mix design of the super flowing concrete is described with respcet to basic concept, confined water ratio($\beta_p$), volume ratio of water-binder(w/b), volume ratio of fine aggregates($S_r$) and coarse aggregates($G_v$). The primary purposes of this study are to evaluate the effects of cementitious materials(fly ash, slag cement, portland cement), mixing factors ($\beta_p$, w/b, $S_r$, $G_v$)., and to propose the mix design method of the super flowing concrete. As results of this study, confined water ratio($\beta_p$) of cementitious materials is very high (0.99~1.1), and then the ranges of the optimum mixing factors to be satisfied with the super flowing concrete are $S_r$ 47$\ell$ 2%, $G_v$ 52$\ell$ 1%.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05b
• /
• pp.67-68
• /
• 2010

Recently, there were not enough studies regarding the mix adjustment and changes of normal physical properties of slump flow type concrete in domestically. Therefore in this paper, it is aimed securing the fundamental data about flow its mix design method by experimental research. The experiment includes the adjustment of the way for slump flow type concrete by the variation of size of coarse aggregate. In the result, it is advisable raising the ratio of fine aggregate and unit water amount by considering the specific surface when increasing the Gmax size.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.10
• /
• pp.67-72
• /
• 2010

G8 summit meeting held in July 2008 decided to set up a long-term goal, by 2050, reducing the world greenhouse emissions by half of those emitted in 1990. In November 2009, the Government announced to reduce the national $CO_2$ emission by 30[%] of BAU by 2020. Electric power industries in Korea produce most of their electricity by burning fossil fuels, and emit approximately 28[%] of national $CO_2$ emissions. Monitoring the $CO_2$ emissions. Monitoring the $CO_2$ emission of electric power plants is very important. This paper presents a method to calculate the hourly $CO_2$ emission for a thermal power plant burning mixture of coal and oil using the performance test data and coal-oil mix rate. An example of $CO_2$ emission calculation is also demonstrated.