• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.156-157
• /
• 2022

The purpose of this study is to propose a 40MPa mortar mixed design model that applies the neural network theory to minimize wasted effort in trial and error. A mixed design model was applied to each of the 60 data using fly ash, blast furnace slag fine powder and thickened rice husk powder. And in the neural network model, the optimized connection weight was obtained by repeatedly applying it to the MATLAB. The completed mixed design model was demonstrated by analyzing and comparing the predicted values of the mixed design model with those measured in the actual compressive strength test. As a result of the mixed design verification experiment, the error rates of the double mixed non-cement mortar using blast furnace slag fine powder and rice husk powder at a height of 40MPa were 3.24% and 3.4%. Mixed with fly ash and rice husk powder had an error rate of 3.94% and 5.8%. The error rate of the triple mixed non-cement mortar of the rice husk powder, fly ash, and blast furnace slag fine powder was 2.5% and 5.1%.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.51-63
• /
• 2011

Surface of fine-size exposed aggregate portland cement concrete pavements(FS-EAPCC) is consist by exposed coarse aggregate to remove upper 2~3mm mortar of concrete slabs. Advantages of FS-EAPCC are maintaining low-noise and adequate skid-resistance level during the performance period. However, FS-EAPCC is required rational management criteria for field application, since it is early stage for application. Design construction and quality control criteria of FS-EAPCC was temporary laboratory tests which including optimum mix and exposing method, selection of adequate aggregate, resistance against, environmental loading and etc. However, these criteria need to be validated base on field application. In this study, experimental constructions were performed and construction procedure and quality control criteria were suggested based on the performance of the FS-EAPCC.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.585-593
• /
• 2021

This study investigates the compressive strength of high-strength cement composites with 64 mixture designs and 2 curing conditions. The cement composites were designed with varying water-to-binder ratios, silica fume content to cement, and binder content per unit volume of cement composite to explore compressive strength development depending on its mix design. An increase in the water-to-binder ratio decreased the compressive strength of the composites, having consistency with the trend in normal concrete. The compressive strength increased with ages at an ambient curing temperature, but it was not identified at high-temperature curing. The compressive strength development was negligible in case that silica fume content to OPC is 15%~25%, but a decrease in the con ten t below 15% reduced compressive stren gth. It was more obvious in the specimen of low water-to-binder ratio. The specimen with 840kg/m³ of binder content per unit volume had the highest compressive strength in this study, and the decrease in binder content reduced the compressive strength of high strength cement composites in low silica fume content.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.10 no.1
• /
• pp.85-95
• /
• 1986

Sonia Delaunay(1885$\~$1979) was one of great pioneers of abstract art, who looked at clothes and fabrics with a plastics eyes. In Association with her husband Robert Delaunay, they were instrumental in founding the movement of Orphism, she proceeded to mix strong and bright colors into her art and had a brilliant influence on the decoration and women's fashion of the 1920's. Having a strong sense for dramatic and decorative color derived in part from childhood remembrances of Russian folk art she initiated a total revolution in which she created her first simultaneous dress with multi-colored samples of materials. She extended the principle of color's simultaneity to the field of fashion, fabric design and applied art. She was interested in the dress for ballet and opera. Fashion designer Paul Poiret asked her to design the fabrics and she created the geometric and abstract patterns with her strong color. It seemed that her design was revolutionary and avant-garde. Always she desired not only art of seeing but also art of living. The purpose of this study is to recognize the influence she had upon the history of modern fashion and fabric design. It was remarked that her paintings served as a basis for later developments in Kinetics Art and had influences on 1980' s abstract patterns for silk dress. Finally, the concept 'simultaneity' of her art signifies endless rhythmes in space and time.

• Design & Manufacturing
• /
• v.13 no.4
• /
• pp.1-9
• /
• 2019

In-mold Coating is a method that can simultaneously perform injection molding and surface coating in injection mold. The material used for coating is two-component polyurethane which is composed of polyol and isocyanate. L-type mixing head can be used to mix polyol and isocyanate uniformly, and inject them inside the mold cavity. The surface quality of the injection molded products by using in-mold coating depends on the mixing uniformity between main agent and hardener. In this study, flow analysis was performed to design a mixing head for uniform mixing of two-component polyurethane. Especially the effects of design parameters of mixing head on mixing uniformity and nozzle pressure were investigated. The parameters of mixing head were mixing chamber diameter, cleaning cylinder diameter, nozzle alignment angle in the horizontal and vertical direction, and cleaning piston position. It was found that optimal design values were mixing chamber diameter of 3.5 mm, cleaning cylinder diameter of 5.0 mm, nozzle horizontal/vertical alignment angles of 140°/160°, and cleaning piston position of 1.8 mm. The optimal values would be used to develop a two-component mixing head achieving an uniform mixing for in-mold coating.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.349-358
• /
• 1997

The present paper describes an investigation into the application of the genetic algorithm (GA) in the optimum design of composite laminated structure. Stochastic processes generate an initial population of designs and then apply principles of natural selection/survival of the fittest to improve the designs. The five test functions are used to verify the robustness and reliability of the GA, and as a numerical example, minimum weight of a cantilever composite laminated beam with a mix of continuous, integer and discrete design variables is obtained by using the GA with exterior penalty function method. The design problem has constraints on strength, displacements, and natural frequencies, and is formulated to a multidimensional nonlinear form. From the results, it is found that the GA search technique is very effective to find the good optimum solution as well as has higher robustness.

• Journal of Fashion Business
• /
• v.23 no.4
• /
• pp.24-37
• /
• 2019

This study focused on the fashion designer brand 'Alexander McQueen' to determine how butterflies are used in modern fashion through the sensibilities of certain designers. To this end, both a literature review and empirical research were conducted. First, we examined the origin of the word and appearance characteristics of butterflies based on prior research and a book, and also surveyed the tendencies used by the fashion designer brand Alexander McQueen. Second, out of 239 items announced by the fashion designer brand "Alexander McQueen" RTW (Ready to Wear) ranging from the S/S Collection in 2008 to the 2018-9 F/W collection, 73 pieces deemed to be fashion using butterfly images were collected through www.samsung.net and www.firstview.com, then analyzed based on timing and aesthetic characteristics. Results. The analysis by time period was divided into fantasy, handicraft, mix and match, and aesthetic characteristics shown in the order of compromise beauty, rhythmical beauty, and voluptuous beauty. The purpose of this study was to determine how butterflies are expressed in fashion based on the sensibility of a specific designer in modern fashion, the fashion designer brand 'Alexander McQueen'. Based on the results of this study, we hope that the information presented herein on fashion of natural images will serve as a basic material for similar research or design ideas as an example of designs based on butterfly images.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.225-228
• /
• 2008

In this paper, we presented our implementation of a counter mode AES based on Virtex4 FPGA. Our design exploits three advanced features: composite field arithmetic SubByte, efficient MixColumn transformation, and On-the-Fly Key-Scheduling for fully pipelined architecture. By pipelining the composite field implementation of the S-box, the area cost is reduced to average 17 percent. By designing the On-the-Fly key scheduling, we implemented an efficient key-expander module which is specialized for a pipelined architecture.

• Journal of the Korea Institute of Building Construction
• /
• v.1 no.2
• /
• pp.174-178
• /
• 2001

This study was performed to control the thermal crack of the mat footing slab in the multi-purposed buildings. In this study, we executed the mixing design of concrete to satisfy the workability and the quality according to the site conditions. And, we evaluated quantitatively about the possibility of thermal crack by using hydration heat analysis system. Finally, we proposed the optimal mixing conditions, curing methods and curing period which all factors are considered. As a result, the optimal mixing conditions were : W/B 41%, unit binder 375kgf/$\textrm{m}^3$, FA replacement ratio 20%. Lowest thermal stress was 22.0kgf/$\textrm{cm}^2$ and at that time thermal crack index was over 1.5, when the coefficient of thermal conductivity was lowest among the curing conditions. And, the total curing time was estimated at 6.7 days according to curing steps.

• Fashion & Textile Research Journal
• /
• v.14 no.5
• /
• pp.758-765
• /
• 2012

As the 21st century is the post-digital era, a mix of the hard digital and the soft analog realm, the school uniform designs for the post-digital generation need to be changed within this paradigm shift. Thus, this study is conducted with the purpose of developing the school uniform design that reflects aesthetic value and sensitivity of the post-digital generation. The definition and background of the post-digital generation is reviewed and the values of this generation are drawn based on the theoretical research. Also, through the survey of 205 high school girls in Seoul, the purchase, wear & fit, and suggestions for improvement of present school uniforms are investigated. Based on the studies above, the guidelines for designing school uniforms for the post-digital generation are established and the products are developed.