• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.152-161
• /
• 2022

We analyzed mitigation strategies for steam generator tube rupture (SGTR) accidents using MARS code under both full-power and low-power and shutdown (LPSD) conditions. In general, there are two approaches to mitigating SGTR accidents: supplementing the reactor coolant inventory using safety injection systems and depressurizing the reactor coolant system (RCS) by cooling it down using the intact steam generator. These mitigation strategies were compared from the viewpoint of break flow from the ruptured steam generator tube, the core integrity, and the possibility of the main steam safety valves opening, which is associated with the potential release of radiation. The "cooldown strategy" is recommended for break flow control, whereas the "RCS make-up strategy" is better for RCS inventory control. Under full power, neither mitigation strategy made a significant difference except for on the break flow while, in LPSD modes, the RCS cooldown strategy resulted in lower break and discharge flows, and thus less radiation release. As a result, using the cooldown strategy for an SGTR under LPSD conditions is recommended. These results can be used as a fundamental guide for mitigation strategies for SGTR accidents according to the operational mode.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.1
• /
• pp.5-14
• /
• 2002

In this paper, we analyze inductive interference in conductive material around 345 kV power transmission line, and evaluate the effects of mitigation wires. Finite element method (FEM) is used to numerically compute induced eddy currents as well as magnetic fields around powder transmission lines. In the analysis model, geometries and electrical properties of various elements such as power transmission line, buried pipe lines, overhead ground wire, and conducting earth are taken into accounts. The calculation shows that mitigation wire reduces fairly good amount of eddy currents in buried pipe line. To find the optimum magnetic field shielding location of mitigation wire, we applied evolution strategy algorithm, a kind of stochastic approach, to the analysis model. Finally, it was shown that we can find more effective shielding effects with optimum location of one mitigation wire than with arbitrary location of multi-mitigation wires around the buried pipe lines.

• Journal of Environmental Impact Assessment
• /
• v.6 no.2
• /
• pp.165-180
• /
• 1997

Mitigation measures in EIS are the important factors in the effectiveness of EIS. This paper analyzed the content of mitigation measures described in the 30 EISs selected, using 7 analysis items in order to discover the degree of effectiveness of mitigation measures. 30 EISs used in this study were selected through variance maximization strategy, and the 7 analysis items were; 1) thoroughness of mitigation content, 2) quantification of mitigation content, 3) explicit description of mitigation effect, 4) likelihood of mitigation effect, 5) impacted area of mitigation effect, 6) time frame of mitigation effect, and 7) environmental impact of mitigation measures. The results showed that the effectiveness of mitigation measures in the analyzed EISs was relatively low both in the appropriateness and in the specificity. It was suggested that in order to improve the appropriateness of EIS as a decision making tool, the effect of mitigation measures, as well as the mitigation measures themselves, should be studied and described more thoroughly and specifically.

• Magazine of the Korean Society of Hazard Mitigation
• /
• v.9 no.4
• /
• pp.7-18
• /
• 2009

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.64
• /
• pp.239-264
• /
• 2014

Two types of responses to climate change exist. First is climate mitigation which includes efforts of reducing CO2 and GHG emissions. Second response is climate adaptation process which is establishing climate resilience in the supply chain. The two are inherently different since mitigation strategy focus on eliminating the source of climate change and is long term in nature but adaptation strategy is moderating the impact of potential or current climate change. In order to embed climate resilience in the supply chain, mitigation strategies and adaption strategies must be implemented simultaneously. Corporation's adaptation to climate change related natural disaster can be seen as a response that includes mitigation and adaptation strategies simultaneously. A comprehensive climate change resilience supply chain approach has to be developed. This paper illustrated guidelines and adaptation process framework businesses can utilize in order to build climate resilience. Screening process before the actual assessment of risk was introduced as well as the whole adaptation process of establishing information system and strengthening climate-related operational flexibility.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.6
• /
• pp.633-641
• /
• 2015

The ROM (roll over mitigation) system is a next-generation suspension system that can improve vehicle-driving stability and ride comfort. Currently, mass-produced safety systems, such as ESC (electronic stability control) and ECS (electronic control suspension), enable measurements of longitudinal and lateral acceleration as well as yaw rate through inertial sensor clusters, but they lack direct measurements of the roll angle. Therefore, in this paper, a roll angle estimation algorithm from ESC system sensors and tire normal force has been proposed. Furthermore, this study presents a method for roll over mitigation force distribution between the front and rear of a ROM system. Performance and reliability of the roll angle estimation and roll over mitigation force distribution were investigated through simulations. The simulation results showed that the proposed control algorithm and strategy are reliable during vehicle rollovers.

• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.778-787
• /
• 2014

This study presents an input filter resonance mitigation method for an AC-DC matrix converter. This method combines the advantages of the one-cycle control strategy and the active damping technique. Unnecessary sensors are removed, and system cost is reduced by employing the grid-side input currents as feedback to damp out LC resonance. A model that includes the proposed method and the input filter is established with consideration of the delay caused by the actual controller. A zero-pole map is employed to analyze model stability and to investigate virtual resistor parameter design principles. Based on a double closed-loop control scheme, the one-cycle control strategy does not require any complex modulation index control. Thus, this strategy can be more easily implemented than traditional space vector-based methods. Experimental results demonstrate the veracity of theoretical analysis and the feasibility of the proposed approach.

• Journal of Conservation Science
• /
• v.36 no.1
• /
• pp.28-36
• /
• 2020

The storage environment of a Japanese woodblock print collection was assessed for organic acids. The active air sampling method was used to collect organic acid emissions in the low microgram range from areas of a selected woodblock print with different pigments, following which an off-gassing mitigation strategy based on the fan filter unit(FFU) system was investigated. Research findings revealed that the off-gassing behavior of woodblock prints is significantly impacted by storage practices and to a lesser degree by the pigments. The FFU system can be used as a mitigation strategy, but the permanence of the results depends on the storage conditions.

• Journal of Aerospace System Engineering
• /
• v.9 no.2
• /
• pp.41-46
• /
• 2015

The various risk factors that affected schedule, costs and mission success, etc. in development of the satellite. This paper derives the considerable "Cost of Quality" factors in the satellite development phase through the survey of practical techniques in respect of measurement of quality cost in the commercial products manufacturing, and proposes mitigation strategy of quality cost using the approach that can be minimized it.

• Magazine of the Korean Society of Hazard Mitigation
• /
• v.9 no.4
• /
• pp.54-60
• /
• 2009