• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1914-1919
• /
• 2021

With the development of advanced industries, research on image processing hardware is essential, and timing verification at the gate level is required for actual chip operation. For FPGA-based verification, DDR3 memory interface was previously applied. But recently, as the FPGA specification has improved, DDR4 memory is used. In this case, when a previously used memory interface is applied, the timing mismatch of signals may occur and thus cannot be used. This is due to the difference in performance between CPU and memory. In this paper, the problem is solved through state optimization of the existing interface system FSM. In this process, data read speed is doubled through AXI Data Width modification. For actual case analysis, ZC706 using DDR3 memory and ZCU106 using DDR4 memory among Xilinx's SoC boards are used.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.2
• /
• pp.136-146
• /
• 2013

In this paper, the residual delay compensation algorithm is proposed for FX-type KJJVC. In case of initial version as that design algorithm of KJJVC, the integer calculation and the cos/sin table for the phase compensation coefficient were introduced in order to speed up of calculation. The mismatch between data timing and residual delay phase and also between bit-jump and residual delay phase were found and fixed. In final design of KJJVC residual delay compensation algorithm, the initialization problem on the rotation memory of residual delay compensation was found when the residual delay compensated value was applied to FFT-segment, and this problem is also fixed by modifying the FPGA code. Using the proposed residual delay compensation algorithm, the band shape of cross power spectrum becomes flat, which means there is no significant loss over the whole bandwidth. To verify the effectiveness of proposed residual delay compensation algorithm, we conducted the correlation experiments for real observation data using the simulator and KJJVC. We confirmed that the designed residual delay compensation algorithm is well applied in KJJVC, and the signal to noise ratio increases by about 8%.

• The KIPS Transactions:PartB
• /
• v.12B no.6 s.102
• /
• pp.637-646
• /
• 2005

Most of the multimedia contents for DBM services art provided as MPEG-2 bit streams. However, they have to be transcoded to H.264 bit streams for practical services because the standard video codec for DMB is H.264. The existing transcoder architecture is Cascaded Pixel-Domain Transcoding Architecture, which consists of the MPEG-2 dacoding phase and the H.264 encoding phase. This architecture can be easily implemented using MPEG-2 decoder and H.264 encoder without source modifying. However. It has disadvantages in transcoding time and DCT-mismatch problem. In this paper, we propose two kinds of transcoder architecture, DCT-OPEN and DCT-CLOSED, to complement the CPDT architecture. Although DCT-OPEN has lower PSNR than CPDT due to drift problem, it is efficient for real-time transcoding. On the contrary, the DCT-CLOSED architecture has the advantage of PSNR over CPDT at the cost of transcoding time.

• Journal of the Economic Geographical Society of Korea
• /
• v.9 no.3
• /
• pp.297-317
• /
• 2006

This article is aimed to find a more successful way to build a metropolitan-wide governance for enhancing industrial cluster in South-East region, Korea. We begin a research with reviewing a current study of regional cluster and its governance. New industrial system and agglomeration changed regional growth theory and urban system. In traditional system, a central city dominated economy of the metropolitan area. However, with development of new transportation and communication technology, a central city lost their superiority to suburban cities. In other words, growing competition between central and suburban cities changed traditional concentration and diffusion theory of urbanization which dominated urban geography for last decades. Next, current situation of development of industrial cluster in South-East region is examined to suggest policy for more competitiveness. South-East region has grown as the most prominent cluster of mechanical engineering and metal industry in Korea since the late 1970s. In the form of agglomeration and network of a specific and its related industry, South-East region has formed a linear industrial belt along with the inter-regional South Coast Highway and contain about ten industrial cities. Accompanying with this growing South-East region, a problem has risen from geographic mismatch between metropolitan-wide industrial cluster and its administrative boundary. Since industrial cluster has no specific administrative boundary, adequate government support for developing industrial cluster has not been provided. Responding to the problem, academics and policy makers maintain need in establishing a metropolitan-wide governance for supporting a cluster. At the end, this paper provides some implication to planners and policy makers.

• Journal of the Economic Geographical Society of Korea
• /
• v.11 no.4
• /
• pp.549-563
• /
• 2008

The purpose of this research is to identify the urban structure in Korea. Though there is research regarding urbanization, there is little regarding the urban structure of the Korean economy. In this paper, two issues will be discussed: the measurements of inter-city and intra-city structure in Korean Metropolitan Statistical Areas (MSAs), which is newly defined. First, the city size rank rule, widely known as Zipf’s Law, will illustrate Korean the inter-city structure. The city size rank rule gives an idea whether Korean MSAs are balanced or not. In general, Korea has a heavy concentration in the Seoul MSA in terms of population. It could be either that the Seoul MSA is too big or that the Busan MSA is too small or both. If this is the primacy problem, a decentralization policy is necessary. On the other hand, if it is a second city problem, development policies for the Busan MSA and Daegu MSA are more important. Next, the Korean intra-city structure will be discussed. The evolutions of the MSAs explain intra-city structure by analyzing population density function and the housing price function. Some large MSAs such as Seoul and Busan have experienced urban sprawl, while other MSAs have experienced urban concentration. The population density gradient by the distance from the ARC GIS shows the growth rate of a city. According to the Spatial Mismatch Index between population and employment, the Ulsan MSA, Gwangju MSA, and Suwon-Hwaseong-Osan MSA are more mismatched, while the Daejeon MSA and Incheon MSA are less mismatched. Therefore, these analyses of Korean urban structure are meaningful in developing regional policy.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1321-1330
• /
• 2023

This study attempts to address the problem of 3D pose estimation for multiple human objects through a single image generated during the character development process that can be used in augmented reality. In the existing top-down method, all objects in the image are first detected, and then each is reconstructed independently. The problem is that inconsistent results may occur due to overlap or depth order mismatch between the reconstructed objects. The goal of this study is to solve these problems and develop a single network that provides consistent 3D reconstruction of all humans in a scene. Integrating a human body model based on the SMPL parametric system into a top-down framework became an important choice. Through this, two types of collision loss based on distance field and loss that considers depth order were introduced. The first loss prevents overlap between reconstructed people, and the second loss adjusts the depth ordering of people to render occlusion inference and annotated instance segmentation consistently. This method allows depth information to be provided to the network without explicit 3D annotation of the image. Experimental results show that this study's methodology performs better than existing methods on standard 3D pose benchmarks, and the proposed losses enable more consistent reconstruction from natural images.

• Information Systems Review
• /
• v.23 no.3
• /
• pp.51-75
• /
• 2021

Global e-commerce websites offer personalized recommendation services to gain sustainable competitiveness. Existing studies have offered personalized recommendation services using quantitative preferences such as ratings. However, offering personalized recommendation services using only quantitative data has raised the problem of decreasing recommendation performance. For example, a user gave a five-star rating but wrote a review that the user was unsatisfied with hotel service and cleanliness. In such cases, has problems where quantitative and qualitative preferences are inconsistent. Recently, a growing number of studies have considered review data simultaneously to improve the limitations of existing personalized recommendation service studies. Therefore, in this study, we identify review and rating mismatches and build a new user profile to offer personalized recommendation services. To this end, we use deep learning algorithms such as CNN, LSTM, CNN + LSTM, which have been widely used in sentiment analysis studies. And extract sentiment features from reviews and compare with quantitative preferences. To evaluate the performance of the proposed methodology in this study, we collect user preference information using real-world hotel data from the world's largest travel platform TripAdvisor. Experiments show that the proposed methodology in this study outperforms the existing other methodologies, using only existing quantitative preferences.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.327-327
• /
• 2009

ZnO with a large band gap (~3.37 eV) and exciton binding energy (~60 meV), is suitable for optoelectronic applications such as ultraviolet (UV) light emitting diodes (LEDs) and detectors. However, the ZnO-based p-n homojunction is not readily available because it is difficult to fabricate reproducible p-type ZnO with high hall concentration and mobility. In order to solve this problem, there have been numerous attempts to develop p-n heterojunction LEDs with ZnO as the n-type layer. The n-ZnO/p-GaN heterostructure is a good candidate for ZnO-based heterojunction LEDs because of their similar physical properties and the reproducible availability of p-type GaN. Especially, the reduced lattice mismatch (~1.8 %) and similar crystal structure result in the advantage of acquiring high performance LED devices. In particular, a number of ZnO films show UV band-edge emission with visible deep-level emission, which is originated from point defects such as oxygen vacancy, oxygen interstitial, zinc interstitial[1]. Thus, defect-related peak positions can be controlled by variation of growth or annealing conditions. In this work, the undoped ZnO film was grown on the p-GaN:Mg film using RF magnetron sputtering method. The undoped ZnO/p-GaN:Mg heterojunctions were annealed in a horizontal tube furnace. The annealing process was performed at $800^{\circ}C$ during 30 to 90 min in air ambient to observe the variation of the defect states in the ZnO film. Photoluminescence measurements were performed in order to confirm the deep-level position of the ZnO film. As a result, the deep-level emission showed orange-red color in the as-deposited film, while the defect-related peak positions of annealed films were shifted to greenish side as increasing annealing time. Furthermore, the electrical resistivity of the ZnO film was decreased after annealing process. The I-V characteristic of the LEDs showed nonlinear and rectifying behavior. The room-temperature electroluminescence (EL) was observed under forward bias. The EL showed a weak white and strong yellowish emission colors (~575 nm) in the undoped ZnO/p-GaN:Mg heterojunctions before and after annealing process, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.7 s.110
• /
• pp.638-647
• /
• 2006

Recently, the DFT-Spread OFDM has been studied for the PAPR reduction. However, the DFT-Spread OFDM produces more ICI and SCI problems than OFDM because phase offset mismatch of the DFT spreading code results from the random phase noise in the oscillator. In this paper, at first, phase noise influence on the DFT-Spread OFDM system is theoretically analyzed in terms of the BER performance. Then, the conventional ICI self-cancellation methods are discussed and two kinds of ICI self-cancellation methods are newly proposed. Lastly, a new DFT-Spread OFDM system which selectively adopts the ICI self-cancellation technique is proposed to resolve the interference problem and PAPR reduction simultaneously. Proposednew DFT-Spread OFDM system can minimize performance degradation caused by phase noise, and still maintain the low PAPR property. Among the studied methods, DFT-Spread OFDM with data-conjugate method or newly proposed symmetric data-conjugate method show the significant performance improvements, compared with the DFT-Spread OFDM without ICI self-cancellation schemes. The data-conjugate method is slightly better than symmetric data-conjugate method.

• Journal of the Korean association of regional geographers
• /
• v.12 no.5
• /
• pp.614-630
• /
• 2006

Improved estimates of populations at risk for quick and effective response to natural and man-made disasters require spatial disaggregation of zonal population data because of the spatial mismatch problem in areal units between census and impact zones. This paper implements a dasymetric surface model to facilitate spatial disaggregation of the population of a census block group into populations associated with each constituent pixel and evaluates the performance of the surface-based spatial disaggregation model visually and statistically. The surface-based spatial disaggregation model employed geographic information systems (GIS) to enable dasymetric interpolation to be guided by satellite-derived land use and land cover data as additional information about the geographic distributor of population. In the spatial disaggregation, percent cover based empirical sampling and areal weighting techniques were used to objectively determine dasymetric weights for each grid cell. The dasymetric population surface for the Atlanta metropolitan area was generated by the surface-based spatial disaggregation model. The accuracy of the dasymetric population surface was tested on census counts using the root mean square error (RMSE) and an adjusted RMSE. The errors related to each census track and block group were also visualized by percent error maps. Results indicate that the dasymetric population surface provides high-precision estimates of populations as well as the detailed spatial distribution of population within census block groups. The results also demonstrate that the population surface largely tends to overestimate or underestimate population for both the rural and forested and the urban core areas.