• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.555-566
• /
• 2015

A TRIAC dimming LED driver that can control the brightness of LED arrays for a wide range of source voltage variations is proposed in this paper. Unlike conventional PWM LED drivers, the proposed LED driver adopts a TRIAC switch, which inherently guarantees zero current switching and has been proven to be quite reliable over its long lifetime. Unlike previous TRIAC type LED drivers, the proposed LED driver is composed of an LC input filter and a variable switched capacitance, which is modulated by the TRIAC turn-on timing. Thus, the LED power regulation and dimming control, which are done by a volume resistor in the same way as the conventional TRIAC dimmers, can be simultaneously performed by the TRIAC control circuit. Because the proposed LED driver has high efficiency and a long lifetime with a high power factor (PF) and low total harmonic distortion (THD) characteristics, it is quite adequate for industrial lighting applications such as streets, factories, parking garages, and emergency stairs. A simple step-down capacitive power supply circuit composed of passive components only is also proposed, which is quite useful for providing DC power from an AC source without a bulky and heavy transformer. A prototype 60 W LED driver was implemented by the proposed design procedure and verified by simulation and experimental results, where the efficiency, PF, and THD are 92%, 0.94, and 6.3%, respectively. The LED power variation is well mitigated to below ${\pm}2%$ for 190 V < $V_s$ < 250 V by using the proposed simple control circuit.

• 정보처리학회논문지D
• /
• 제9D권3호
• /
• pp.457-466
• /
• 2002

본 논문에서는 인터넷을 통해 실시간으로 항상 최신의 컴퓨터 용어 검색 서비스를 제공할 수 있는 웹을 기반으로 한 컴퓨터 용어 사전을 설계하고 구현하였다. 본 용어사전은 FOLDOC(Free On-Line Dictionary Of Computing)의 사전을 기본으로 영문 해설을 제공하고 각 용어에 대해 한 명 이상의 번역자가 번역할 수 있도록 함으로써 기존 컴퓨터 사전에서 제공하지 않는 기능을 추가하였다. 그리고 SQL Server DBMS와 SQL을 이용한 다양한 검색 인터페이스(입력 문자로 시작하는 용어 검색, 입력 문자가 해설에 들어간 용어 검색 등)를 제공함으로써 적은 정보만으로도 원하는 용어를 검색할 수 있게 하였다. 본 컴퓨터 용어 사전의 성능 평가를 위해서 FOLDOC Mirror Site의 로그를 분석하여 CPU 부하율을 측정하였다. 실험 결과 본 컴퓨터 용어 사전은 최대 1780여명 이상의 동시 사용자를 수용할 수 있다는 결론을 얻었다.

• 한국전기전자재료학회논문지
• /
• 제15권1호
• /
• pp.67-74
• /
• 2002

A phosphor for Plasma Display Panel, BaMgAl$_{10}$ O$_{17}$ :Eu$^{2+}$, showing a blue emission band at about 450nm was prepared by a solid-state reaction using BaCO$_3$, $Al_2$O$_3$, MgO, Eu$_2$O$_3$ as starting materials wish flux AlF$_3$. The study of the behaviour of Eu in BAM phosphor was carried out by the photoluminescence spectra and the Rietveld method with X-ray and neutron powder diffraction data to refine the structural parameters such as lattice constants, the valence state of Eu, the preferential site of Mg atom and the site fraction of each atom. The phenomenon of the concentration quenching was abound 2.25~2.3wt% of Eu due to a decrease in the critical distance for energy transfer of inter-atomic Eu. Through the combined Rietveld refinement, R-factor, R$_{wp}$, was 8.11%, and the occupancy of Eu and Mg was 0.0882 and 0.526 at critical concentration. The critical distance of Eu$^{2+}$ in BAM was 18.8$\AA$ at 2.25% Eu of the concentration quenching. Furthermore, c/a ratio was decreased to 3.0wt% and no more change was observed over that concentration. The maximum entropy electron density was found that the modeling of $\beta$-alumina structure in BaMgAl$_{10}$ O$_{17}$ :Eu$^{2+}$correct coincided showing Ba, Eu, O atoms of z= 1/4 mirror plane.e.ane.e.

• Archives of Plastic Surgery
• /
• 제36권5호
• /
• pp.642-648
• /
• 2009

Purpose: Hexadactyly without thumb is a rare congenital anomaly of the hand where six triphalangeal digits are symmetrically distributed without thumb. Contrary to mirror hands, triphalangeal six digits are symmetrically distributed on each side at the midline with well - differentiated carpal bones, extensor tendons, one ulnar and one radius. The authors developed a new surgical technique based on a three - dimensional concept to correct the hexadactyly and applied to 2 cases of hexadactyly with good functional and aesthetic results. Here we document the surgical technique and its result. Methods: A 16 month old male patient visited our clinic with chief complaints of bilateral hexadactyly deformity. On physical examination most radial first and second digits showed no opposition and adduction motion on both side hands. Radiography showed 6 triphalangeal digits with normal development of carpal, radial and ulnar bone. Right side abnormality was corrected by removal of most radial side extra - digit, rotation and migration of 2nd ray to thumb position and creation of 1st web by transposing a mid - palm based rectangular palmar flap as in Snow & Littler procedure which has been being applied for correction of 1st web syndactyly in cleft hand deformity. Seven months later, left side abnormality was also corrected with the same procedure. Results: Postoperative appearances of the both hands were satisfactory. Flexion, extension, opposition and grasping were possible with the pollicized 2nd ray. Pinching power was 3.0 kg 15 months after surgery and 2.5 kg 22 months after in right hand respectively. Conclusion: In correction of hexadactyly deformity, satisfactory aesthetic and relevant functional results can be expected with authors' newly developed technique: removal of most radial digit, rotation and migration of 2nd digit to thumb position as well as creation of the 1st web space by transposition of mid - palm based rectangular flap.

• 한국정밀공학회지
• /
• 제22권5호
• /
• pp.103-112
• /
• 2005

This paper presents one-axis high precision scanning system and illustrates the design of modified $X-Y-{\theta}$ stage as a tracker using VCM and commercialized air bearings for it. The scanning system for 100nm resolution is composed of the 3-axis stage and one axis long stroke linear motor stage as a follower. In this study a previous proposed and presented structure of VCM for the fine stage is modified. The tracker has 3 DOF($X-Y-{\theta}$ motions by four VCM actuators which are located on the same plane. So 4 actuating forces are suggested and designed to create least pitch and roll motions. This article will show about the design especially about optimal design. The design focus of this fine stage is to have high acceleration to accomplish high throughput. The optimal design of maximizing acceleration is performed in restrained size. The most sensitive constraint of this optimal design is heat dissipation of coil. There are 5 design variables. Because the relationship between design variables and system parameters are quite complicated, it is very difficult to set design variables manually. Due to it, computer based optimal design procedure using MATLAB is used. Then, this paper also describes the procedures of selecting design variables for the optimal design and a mathematical formulation of the optimization problem. Based on the solution of the optimization problem, the final design of the stage is also presented. The results can be verified by MAXWELL. The designed stage has the acceleration of about 5 $m/s^{2}$ with 40kg total mass including wafer chuck and interferometer mirror. And the temperature of coil is increased $50^{\circ}C$. In addition, the tracker is controlled by high precision controller system with HP interferometer for it and linear scaler for the follower. At that time, the scanning system has high precision resolution about 5nm and scanning resolution about 40nm in 25mm/s constant speed

• 비파괴검사학회지
• /
• 제36권3호
• /
• pp.188-194
• /
• 2016

본 연구에서는 Pt/Ti 박막과 기판 사이 계면의 접합특성을 비파괴적으로 평가하는 acousto-optic 기법을 제안한다. 현재 상용화된 기술만으로 마이크로/나노 스케일의 박막을 평가하는데 많은 어려움이 있기 때문에 미세구조 변화에 민감한 광학기술과 음향기술이 결합된 간섭계를 적용하여 연구를 수행하였다. 사용한 기법은 마이켈슨 간섭계를 기반으로 하며, 거울에 의한 광 경로차 대신 박막시험편 계면의 진동 영향에 따라 발생하는 간섭현상을 분석하였다. 박막시험편은 특정 주파수에서 공진과 유사한 현상을 보이고 이로 인해 프린지 패턴의 콘트라스트가 낮아지므로, 각 주파수 대역별 프린지 패턴 변화를 스펙트럼 결과로 정량화하여 제안된 기법을 이용한 박막의 접합특성 평가 가능성을 확인하였다.

• 한국축산식품학회지
• /
• 제30권3호
• /
• pp.385-391
• /
• 2010

This study was conducted to compare proteins expressed in M. longissimus from Hanwoo and Holstein steers immediately after slaughter. Two-dimensional electrophoresis (2DE)/LC-MS/MS analysis revealed that the total number of detectable protein spots from longissimus muscle tissues was slightly higher in Hanwoo ($575{\pm}65$) than Holstein ($534{\pm}13$) steers, but that these numbers were not statistically significant due to large variation between replicates. A total of twelve protein spots did not match between sample groups, eight of which were expressed in the Hanwoo sample and four that were expressed in the Holstein sample. The protein spots detected in the Hanwoo sample included smooth muscle and non-muscle myosin alkali light chain 6B isomers, ${\alpha}B$ crystallin isomers, hemoglobin ${\beta}$-A chains, slow myosin heavy chains, and slow skeletal muscle troponin T chains. Collectively, these proteins are a class of slow-twitch muscle fiber and mirror that Hanwoo muscle tissue sampled for the current study contained more slow-twitch muscle fibers than Holstein one. Conversely, proteins detected from the Holstein sample included ankyrin repeat domain 2 and creatin kinase isomers. Given that creatin kinase isomers are related to the fast-twitch muscle, these results likely indicate that Holstein muscle tissue sampled for the current study contained more fast-twitch muscle fibers than Hanwoo beef.

• 한국표면공학회지
• /
• 제47권5호
• /
• pp.263-268
• /
• 2014

Nanocrystalline diamond(NCD) coated SiC balls were applied in a ball-on-disk tribometer. After seeding in an ultrasonic bath containing nanometer diamond powders, $2.2{\mu}m$ thick NCD films were deposited on sintered 3 mm diameter SiC balls at $600^{\circ}C$ in a 2.45 GHz microwave plasma CVD system. Bare $ZrO_2$ and SiC balls were prepared for comparison as test balls. Tribology tests were performed in air with pairs of three different balls and mirror polished steel(SKH51) disk. The wear tracks on balls and disks were examined by optical microscope and alpha step profiler. Under the load of 3 N, the friction coefficients of steel against $ZrO_2$, SiC and NCD-coated balls were between 0.4 and 0.8. After a few thousands sliding laps, the friction coefficient of NCD-coated balls dropped from 0.45 to below 0.1 and maintained thereafter. Under a higher load of 10 N or 20 N with a long sliding distance of 2 km, $ZrO_2$ and SiC balls exhibited the similar friction coefficients as above. The friction coefficient of NCD-coated balls was less than 0.1 from the beginning and increased to above 0.1 steadily or with some fluctuations as sliding distance increased. NCD coating layers were found worn out after long duration and/or high load sliding test, which resulted in the friction coefficient higher than 0.1.

• 한국정보통신학회논문지
• /
• 제11권8호
• /
• pp.1544-1551
• /
• 2007

본 논문에서는 넓은 동작전압 범위와 저소비 전력 그리고 개선된 파워-업 특성을 가지는 캐스코드 전류 거울형 CMOS 밴드갭 기준전압 발생기의 스타트-업 회로를 제안하였다. 새롭게 제안된 스타트-업 회로는 기존의 스타트-업 회로에 비해 안정적인 파워-업 특성을 가지며 공급전압(VDDA)이 높아지더라도 밴드갭 기준전압 발생기 회로의 동작에 영향을 미치지 않는 것을 모의실험을 통하여 확인하였고 $0.18{\mu}m$ tripple-well CMOS 공정을 이용하여 테스트 칩을 제작하고 측정하였다. 측정 된 기준전압 Vref는 평균값이 738mV이고 $3{\sigma}$는 29.88mV이다.

• 영어영문학
• /
• 제55권6호
• /
• pp.1013-1034
• /
• 2009

The space of the Other assumes the space of Barthes's multiplicity and Foucault's transdiscursive position, and, therefore, aims at becoming the locus in which the speaking subject and the hearing subjects are supposed to communicate and constitute as if they were situated in the pscychoanalytic session. However, the wall of untranslatibility across language and cultures still exist there in the space of the Other in the form of trauma and aggressivity, as Lacan demonstrate perceptively through the reading of Kant avec Sade. In short, Lacan regards the moral commandment (to love one's neighbor as oneself) as the obstacle in the Freud's myth of transgression, and interprets this in terms of the emergence of the Other. Freud understands that the aggressivity in the subject's own heart was inherent in all humans, and that one's neighbor would be evil. Lacan goes beyond Freud and articulates that the aggressivity in the imaginary relation with the Other in the mirror stage insures that an evil inheres in the very being of humanity. A global phenomenon of the diasporic identities and hybridity, the phenomenon which has been represented by the complicated intermixture of terms which span from diaspora, postcolonialism, postnationalism. and transnationalism can be clarified, if they are put in the context of the ethics of Othering or becoming the Other. The ethics of Othering presupposes the situation in which the diasporic subjects encounter the lack of the cross-cultural negotiation and communication. The purpose of this paper is to demonstrate how the poetics of Other and the logic of the ethics of Othering can explain the postmodern or transmodern world which has become deterritorialized, diasporic, and transnational as well as how one can encounter the results of diasporic and postcolonial double consciousness, a consciousness which is a discursive category for multicultural or cross-cultural, focusing on the concept of liminality/interstitiality