• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.46.1-46.1
• /
• 2010

Surface passivation of crystalline silicon(c-Si) surface with a-Si:H thin films has been investigated by using quasi-steady-state photo conductance(QSSPC) measurements. Analyzing the influence of a-Si:H film thickness, process gas ratio, deposition temperature and post annealing temperature on the passivation properties of c-Si, we optimized the passivation conditions at the substrate temperature of $200-250^{\circ}C$. Best surface passivation has been obtained by post-deposition annealing of a-Si:H film layer. Post annealing around the deposition temperature was sufficient to improve the surface passivation for silicon substrates. We obtained effective carrier lifetimes above 5.5 ms on average.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.462-462
• /
• 2014

The effect of rear passivation for passivated emitter and rear cell (PERC) using ozone and H2O oxidant of atomic layer deposited (ALD) Al2O3 was studied by post-annealing in N2 and forming gas ambients. Rear surface of PERC solar cell was passivated by Al2O3 grown by ALD with ozone and H2O oxidant. Al2O3 grown by ALD with ozone oxidant has been known to have many advantages, such as lower interface defects, low leakage current density. Its passivation quality is better than Al2O3 with H2O. Al2O3 layer with 10 nm and 20 nm thickness was grown at $150^{\circ}C$ with ozone oxidant and at $250^{\circ}C$ with H2O oxidant. And then each samples were post-annealled at $450^{\circ}C$ in N2 ambients and at $850^{\circ}C$ in forming gas ambients. The passivation quality was investigated by measuring the minority carrier lifetime respectively. We examined atomic layer deposited Al2O3 such as growth rate, film density, thickness, negative fixed charge density at AlOx/Si interface, and reflectance. The influences of process temperature and heat treatment were investigated using Sinton (WCT-120) by Quasi-Steady State Photoconductance (QSSPC) mode. Ozone-based ALD Al2O3 film shows the best carrier lifetime at lower deposition temperature than H2O-based ALD.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.3
• /
• pp.27-33
• /
• 2014

To develop high efficiency crystalline solar cells, the $SiN_x$ film for surface passivation and anti-reflection coating is very important and it is generally deposited by PECVD. In this paper, the $SiN_x$ film deposited by Hot-Wire chemical vapor deposition(HWCVD) that has no plasma damage was studied. First, to optimize the $SiN_x$ film deposition process, $SiH_4$ gas rate and substrate temperature were varied and then refractive index and thickness were measured. When $SiH_4$ gas rate was 22sccm and substrate temperature was $100^{\circ}C$, refractive index was 1.94 and higher than that of other process conditions. Second, the lifetime was measured by varying the annealing temperature and time. The annealing process was made from 5 to 30 minutes at $300{\sim}500^{\circ}C$. When the annealing temperature was $100^{\circ}C$ and time was 10minute, the lifetime was the highest. The lifetime of annealed samples was also measured after the firing process at $975^{\circ}C$. Although the lifetime of all samples was decreased by firing process, the lifetime of annealed samples before the firing process was higher than that of fired samples only. Finally, the characteristics of solar cells with HWCVD $SiN_x$ film were measured.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.2
• /
• pp.101-105
• /
• 2010

Silicon electrode and ring in a plasma etcher those are in contact with harsh plasma suffer from periodic heating and cooling during their lifetime. This causes the silicon components failure due to thermal stress remaining the persistent slip bands (PSBs) on their surfaces. The factors that determine the lifetime of silicon electrode and ring were discussed with respect to silicon ingot. The impurity level and the average defect concentration measured with glow discharge mass spectrometer (GDMS) and microwave photo-conductance decay (${\mu}$-PCD) were compared with the grade of silicon ingots those are divided to slip-free and slip-allowed ingot. Some silp-allowed samples showed planar defects along <110> direction on {001} surface. The role of these defects was suggested from the viewpoint of the lifetime of silicon components.

• Current Photovoltaic Research
• /
• v.6 no.1
• /
• pp.17-20
• /
• 2018

The dependency of the photovoltaic performance of p-/n-type silicon solar-cells on the metallic contaminant type (Fe, Cu, and Ni) and concentration was investigated. The minority-carrier recombination lifetime was degraded with increasing metallic contaminant concentration, however, the degradation sensitivity of recombination lifetime was lower at n-type than p-type silicon wafer, which means n-type silicon wafer have an immunity to the effect of metallic contamination. This is because heavy metal ions with positive charge have a much larger capture cross section of electron than hole, so that reaction with electrons occurs much more easily. The power conversion efficiency of n-type solar-cells was degraded by 9.73% when metallic impurities were introduced in the silicon bulk, which is lower degradation compared to p-type solar-cells (15.61% of efficiency degradation). Therefore, n-type silicon solar-cells have a potential to achieve high efficiency of the solar-cell in the future with a merit of immunity against metal contamination.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.2
• /
• pp.29-35
• /
• 2014

In this study general solar cell production process was complemented, with research on improvement of solar cell efficiency through surface structure and thermal annealing process. Firstly, to form the pyramid structure, the saw damage removal (SDR) processed surface was undergone texturing process with reactive ion etching (RIE). Then, for the formation of smooth pyramid structure to facilitate uniform doping and electrode formation, the surface was etched with HND(HF : HNO3 : D.I. water=5 : 100 : 100) solution. Notably, due to uniform doping the leakage current decreased greatly. Also, for the enhancement and maintenance of minority carrier lifetime, antireflection coating thermal annealing was done. To maintain this increased lifetime, front electrode was formed through Au plating process without high temperature firing process. Through these changes in two processes, the leakage current effect could be decreased and furthermore, the conversion efficiency could be increased. Therefore, compared to the general solar cell with a conversion efficiency of 15.89%, production of high efficiency solar cell with a conversion efficiency of 17.24% was made possible.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.3
• /
• pp.60-65
• /
• 1984

In this paper, we have used symmetrical GaAs/(Ga, Al) As DH-LED as a model for the optimization of frequency response which is the most important design parameter of the optical communication-LED. And optimum design parameters have been chosen to improve performance factors of the DH-LED by computer simulation. This is for the purpose of systematic consideration of the interrelation of the physical parameters such as impurity concentration of the active layer, thickness of the active layer, minority carrier lifetime, space charge capacitance and injected current density.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.423.1-423.1
• /
• 2014

본 발표에서는 실리콘 이종접합 태양전지에서 중요한 실리콘 웨이퍼 표면/계면 제어에 대하여 발표한다. 다시 말하여, 실리콘 웨이퍼 기판 세정공정 변화에 따른 실리콘 웨이퍼 표면의 소수전하수명(minority carrier lifetime, MCLT) 및 태양전지 소자특성 변화에 대하여 연구하였다. 구체적으로, 실리콘 웨이퍼 클리닝 최초단계로써 KOH damage etching 공정을 도입할 때, 이후 클리닝 공정을 통일하여 적용한 웨이퍼 표면의 MCLT 및 상기 웨이퍼를 이용하여 플라즈마 화학기상증착법(PECVD)을 통하여 제작한 태양전지 소자 효율은 KOH etching 시간이 10분일 때 최대치에 도달한 후 감소하였다. 또한, RCA1, RCA2, Piranha로 이루어진 웨이퍼 클리닝 단계의 사이에, 또는 맨 마지막에 묽힌 불산용액(DHF, 5 %) 처리를 하여 표면 산화막 제거 및 수소종단처리를 하여 기판의 passivation 특성을 향상시키고자 할 때, 불산용액 처리 순서에 따른 웨이퍼 표면의 MCLT 및 태양전지 소자 효율을 비교하였다. 그 결과, 묽은불산용액을 클리닝 단계 사이에 적용하였을 때의 MCLT 및 태양전지 소자의 특성이 더 우수하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.357-360
• /
• 2003

In this paper, we designed 4.5kV/1.5kA IGCT devices. GCT thyristor has many superior characteristics compared with GTO thyristor, for examples; snubberless turn-off capability, short storage time, high turn-on capability, small turn-off gate charge and low total power loss of the application system containing device and peripheral parts such as anode reactor and snubber capacitance. In this paper we designed GCT thyristor devices, and analyzed static and dynamic characteristics of GCT thyristor depending on the minority carrier lifetime, n-base thickness and doping concentration of n-base region, respectively. Especially, turn-on and turn-off characteristics are very important characteristics for GCT thyristor devices. So, we considered above characteristic for design and analysis of GCT devices.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.370-370
• /
• 2009

이종접합태양전지는 구조적 대칭성 때문에 웨이퍼 두께가 감소하여도 보우잉이 일어나지 않는 특징이 있으며, 산요에서 개발한 이종접합태양전지의 효율이 22% 이상을 보이고 있다. 이종접합태양전지에서 비정질 실리콘과 실리콘 웨이퍼의 계면에 따라 이종접합태양전지의 특성이 크게 변화한다. 본 연구에서는 패시베이션 층으로 사용되는 비정질 실리콘을 hot wire chemical vapor deposition(HWCVD)을 사용하여 이종접합태양전지에 적용하였으며 기존의 plasma-enhanced chemical vapor deposition을 이용한 비정질 실리콘을 적용한 이종접합태양전지와 비교하였다. 패시베이션 특성을 확인하기 위해 quasi-steady state photoconductance로 minority carrier lifetime을 측정하였고, 태양전지 특성평가로는 암전류특성 및 광전류특성을 사용하였다. HWCVD를 사용하여 패시베이션한 태양전지의 경우 16.1%의 효율을 보였다.