• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.10
• /
• pp.41-52
• /
• 2019

The purpose of this study was to analyze the historical development of high-rise buildings-promoting policies in Seoul in terms of modern urban redevelopment. The results of this study were as follows; The maximum height of the buildings has been limited by National codes since 1934. But at the same time, Seoul Metropolitan government had limited the minimum building floors of roadside buildings through local regulations after the Korean War. The high-rise city had been regarded as a means of beautifying Seoul for a long time. However since the 2000s, the minimum height limit for buildings was removed from local regulations and the concept of high-rise restrictions was no longer significant as before.

• Journal of Labour Economics
• /
• v.39 no.2
• /
• pp.1-34
• /
• 2016

We estimate the effect of an increase in the minimum wage on employment. In Korea, there is no exogenous variation in the minimum wage across regions or industries. One single minimum wage is applied to every worker in the whole country. In this paper, we exploit arguably exogenous variation in the proportion of workers affected by the minimum wage across worker groups defined by age, sex, education, tenure and establishment size. Using the data from the Survey on Labor Conditions by Type of Employment (SLCTE) from 2006 to 2014, we find that a 1% increase in the minimum wage decreases the full-time equivalent employment by about 0.14%. The effect is heterogeneous across workers; we find the effect is more adverse for female workers, low-educated, younger and older workers, workers with a shorter tenure, and workers in small- and medium-sized establishments.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.4
• /
• pp.262-266
• /
• 2013

In OFDM system, cyclic prefix (CP) is used to eliminate the inersymbol interference that is caused by the channel dispersion. However, a long CP reduces the data transmission rate. An alternative to a logn CP is the a time domain channel shortening filter at the receiver that shortens the effective channel, thus a short CP is used in spite of a long channel impulse response. In the paper, we compare a various channel shortening techniques; minimum shortened signal to noise ratio (MSSNR), minimum interblock interference (min-IBI), and minimum ISI (min-ISI).

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.213-214
• /
• 2008

This paper considers design of a robust controller that alleviates disturbance effects and compensates performance degradation of plants with time-delay. Disturbance observer(DOB) approach as a tool of robust control has been widely employed in industry. However, since the time-delay makes the plant non-minimum phase, classical DOB cannot be applied directly to the time-delay system. By using a new DOB structure for non-minimum phase systems together with the Smith Predictor, we propose a new control algorithm for reducing the effects of disturbance and time-delay of the system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.7
• /
• pp.758-768
• /
• 2005

The ball screw actuated by the electric motor is widely used as an essential actuator for driving the mechanical system by virtue of accuracy and force transmission capability. In this paper, a design of the global sliding mode control is presented to drive the ball screw actuator along the minimum time trajectory, In the proposed control scheme, if the ranges of parametric uncertainties and torque limits of the system are specified, the arrival time of the load along the minimum time trajectory can be estimated. Also, the arriving time at the reference input and the maximum acceleration are expressed in a closed form solution. Conversely, the capacity of a ball screw actuator including the motor can be easily designed if the external load and its transportation time are specified. The superior performance of the proposed control scheme and analysis is validated by the computer simulation and experiments comparing with other sliding mode controllers.

• Journal of the Korean Institute of Gas
• /
• v.19 no.3
• /
• pp.25-31
• /
• 2015

Effects of residence time on the MIT(Minimum Ignition Temperature) in suspended Mg particles are examined by using MIT experimental data and calculation results of terminal velocity. With increasing of the average particle diameter, we were able to identify that MIT of Mg dusts increased and the calculated residence time of particle decreased exponentially. Also, the influence on terminal velocity due to temperature increase increased slightly with increasing of average particle diameter.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.9
• /
• pp.449-458
• /
• 2006

In general, a DC solenoid valve is evaluated by the performances such as the attraction force at maximum and minimum strokes, temperature rising, power consumption and time of action. The importance of each performance may be different according to the specific application purpose. When the temperature rising and power consumption are fixed, however, the performance of DC solenoid valve is usually evaluated by the attraction force at maximum and minimum strokes and time of action. In this paper, the shape of the pole face of plunger and core is optimized to increase the attraction force at maximum stroke, and thereby to minimize the time of action. For the shape optimization, (1+1) evolution strategy is incorporated with the response surface method(RSM) and finite element method(FEM).

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.142-150
• /
• 2002

This study describes a method of finding an optimal path of a soccer robot by using a concentric circle method with different radii of rotation. Comparing with conventional algorithms which try to find the shortest path length, the variable concentric circle method find the shortest moving time. The radius fur the shortest moving time for a given ball location depends on the relative location between a shooting robot and a ball. Practically it is difficult to find an analytical solution due to many unknowns. Assuming a radius of rotation within a possible range, total path moving time can be calculated by adding the times needed for straight path and circular path. Among these times the shortest time is obtained. In this paper, a graphical solution is presented such that the game ground is divided into 3 regions with a minimum, medium, and maximum radius of rotation.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.4
• /
• pp.125-137
• /
• 2011

Customers are generally requiring a variety of products, earlier due date, and lower price. A manufacturing process needs the efficient scheduling to meet those customer's requirements. This study proposes the novel algorithm named MJA(Minimum Job completion time and AGV time) that increases the performance of machines and AGV(Automated Guided Vehicles) in many kinds of job types. MJA optimizes the bottleneck of machines and efficiency of AGV with considering two types of dispatching at the same time. Suggested algorithm was compared with existing heuristic methods by several simulations, it performed better for reducing the time of tardiness.

• Journal of radiological science and technology
• /
• v.45 no.3
• /
• pp.255-262
• /
• 2022

In this study, by analyzing the examination time for each procedure, the appropriate workload of radiologic technologist is analyzed based on the actual examination time in the current clinical setting by comparing with the examination time in the radiology field setting of the health insurance review and assessment service. In addition, this result is introduced into the calculation of relate value units; it was attempted to provide accurate and objective evidence in the field of radiology. From May 2020 to December 2021, the study retrospectively investigated the examination times recorded in the electronic medical record and picture archiving and communication system at 5 tertiary general hospitals and 1 general hospital. The total of 16 examination parts are applied in this study, including the head, sinuses, chest, ribs, abdomen, pelvis, cervical, thoracic, lumbar, shoulder, elbow, wrist, hip, femur, knee, and ankle. The minimum number of images that could be obtained per radiation generator was 3.6 images for one hour, and the maximum was 6.4 images. When 50% median of procedure time is calculated, the minimum number of images that could be obtained was 16.7 images and maximum was 35.3 images; in addition, minimum examination time is 1.7 minutes, and maximum time is 3.6 minutes. In conclusion, it is judged that there will be insufficient explanation time for basic infection instructions such as hand hygiene during the examinations in current clinical practice. It is believed that radiologic technologists will contribute to providing higher-quality of radiation examination services to the public by complying with guidelines for work and setting appropriate workload on their own.