• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.233-236
• /
• 2002

An efficient method was developed in this study to obtain optimal stacking sequences, thicknesses, and minimum weights of stiffened laminated composite shells under combined loading conditions and stiffener layouts using genetic algorithms (GAs) and finite element analyses. Among many parameters in designing composite laminates determining a optimal stacking sequence that may be formulated as an integer programming problem is a primary concern. Of many optimization algorithms, GAs are powerful methodology for the problem with discrete variables. In this paper the optimal stacking sequence was determined, which gives the maximum critical buckling load factor and the minimum weight as well. To solve this problem, both the finite element analysis by ABAQUS and the GA-based optimization procedure have been implemented together with an interface code. Throughout many parametric studies using this analysis tool, the influences of stiffener sizes and three different types of stiffener layouts on the stacking sequence changes were throughly investigated subjected to various combined loading conditions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.3
• /
• pp.265-273
• /
• 1997

The minimum amounts of leucaena (Leucaena leucocephala) required to improve the performance of cattle on a straw diet has been studied. Four levels of leucaena, namely 0 (0%), 2 kg (10%), 4 kg (18%) and 6 kg (27% of dietary dry matter intake) were supplied to 4 adult indigenous bulls ($355{\pm}21.5kg$ weight) fed rice straw alone, in a $4{\times}4$ latin square design. Measurements were made on intake, digestibility, N balance and microbial N yield. Up to 10% level of leucaena supplementation, there were no significant improvement on intake, digestibility, microbial N yield and N balance. Both straw and total dry matter intake showed diminishing return to increasing levels of leucaena supplementation and the maximum intake was observed at around 20% level. However, dietary N and digestible organic matter intake, the microbial N yield and the N balance increased linearly to the increasing levels of leucaena supplementation. On a rice straw based diet, the minimum level of leucaena required to improve the animal performance would probably be at around 20% of the dietary intake.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.6
• /
• pp.74-86
• /
• 2021

The composite lattice structure is a structure that supports the required load with the minimum weight and thickness. Composite lattice structure is manufactured by the filament winding process using impregnating high-strength carbon fiber with an epoxy resin. Filament winding process can laminate and manufacture only structurally necessary parts, composite lattice structure can be applied to aircraft fuselages, satellite and launch vehicles, and guided weapons to maximize weight reduction. In this paper, the development and evaluation of the composite lattice structure corresponding to the entire process from design, analysis, fabrication, and evaluation of large-scale cylindrical and conical composites lattice structure were performed. To be applicable to actual projectiles and guided weapons, we developed a cylindrical lattice structure with a diameter of 2,600 mm and a length of 2,000 mm, and a conical lattice structure with an upper diameter of 1,300 mm, a lower diameter of 2,500 mm, and a length of 900 mm. The performance of the developed composite lattice structure was evaluated through a load test.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.69-82
• /
• 1992

Vibration of intake menifold is important as it could worsen the noise levels radiated from surface itself and support bracket, and it eventually leads to the failures of a Throttle Position Sensor and an Idle Air Control Valve. In this study, structural modification method is proposed to reduce structural vibration of an intake manifold system. At first, vibration problems are identified through tests on a running engine. Then modal data acquired by modal testing and finite element analysis are helpful to understand vibration mechanism of the system, and used as the design guide when structural modifications are attempted. After the system model is validated by comparison of the modal data obtained from analysis and experiment, iterative calculations are performed to find optimized structure of the system by finite element analysis. As a result, a newly designed plenum bracket is suggested in such a way that the intake manifold is stiffened, and that design of the support bracket is suggested in such a way that the intake manifold is stiffened, and that design of the support bracket is changed in terms of bolting position, thickness, shape, and minimum weight increase. Finally, it is shown that a new design achieves a significant reduction of vibration of an intake manifold system and it is confirmed by tests on a running engine.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.27-37
• /
• 1993

An efficient method to solve the minimum weight design problem for frame structures subjected to stress and displacement constraints is presented. The different cross-sectional shapes are conside red in order to apply engineering design in which usually required custom fabrication. To increase the efficiency of the optimization process, the structural response quantities(nodal forces, displacements) are linearized with respect to cross-sectional properties or their reciprocal, based on first order Taylor series expansion, while cross-sectional dimensions are considered as design variables. Numerical examples are performed and compared with other methods to demonstrate the efficiency and reliability of approximation method for frame structural optimization with different cross-sectional shapes. It is shown that the number of finite element analysis is greatly reduced and it leads to a highly efficient method of optimization of frame structures.

• Computational Structural Engineering
• /
• v.3 no.1
• /
• pp.83-95
• /
• 1990

Many structural optimization problems are solved by numerical algorithms since these are complicated and nonlinear. To provide a wider base and popular it to structual design optimization, reliable, accurate and superlinearly convergent nonlinear programming algorithm with active-set strategy have been developed. One of these is RQP(recursive quadratic programming method). This algorithm has several parameters and its performance is influenced by variations of these key parameters. Therefore, an RQP algorithm is selected to enhance its numerical performances by choosing proper parameters. The paper persents these influences on its numerical performance. For comparison of performances, a structural design software for minimum weight of truss subjected to displacement, stress, and lower and upper bounds on design variables is also implemented.

• Journal of the Korea Convergence Society
• /
• v.8 no.6
• /
• pp.219-226
• /
• 2017

As the UAV industry is getting matured, various types of UAVs have appeared in many application fields, including filming, reconnaissance, rescue, and etc. and it requires the quick hardware designs, particularly a battery pack, of the UAV. We developed the automatic battery pack design tool for the convenient battery pack configuration design of the hoverable type delivery UAV. With inputs, including current profile, voltage profile, various kinds of cell specifications, desired battery pack voltage, and etc. the automatic battery pack design tool calculates a pack having the minimum weight and the maximum capacity by combining either homogeneous cells or heterogeneous cells. Also, the tool could predict the capacity fading trend of the designed battery pack configuration.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.311-316
• /
• 2004

LMTT (Linear Motor-based Transfer Technology) is a horizontal transfer system for the yard automation. which has been proposed to take the place qf AGV (Automated Guided Vehicle) in the maritime container terminal. the system is based on PMLSM (Permanent Magnetic Linear Synchronous Motor) that consists of stator modules on the rail and shuttle mr. It is desirable to reduce the weight of LMTT in order to control the electronic devices with minimum energy. In this research structural optimization for a mover of shuttle mr is performed to minimize the weight satisfying design criteria the objective function is set up as weight. On the contrary, design variable is considered as transverse, longitudinal and wheel beam's thickness and shape variable determining the dimension toward high direction and the constraints are the stresses.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.415-420
• /
• 2005

LMTT (Linear Motor-based Transfer Technology) is the horizontal transfer system for yard automation, which has been proposed to take the place of AGV (Automated Guided Vehicle) in the maritime container terminal. The system is based on PMLSM (Permanent Magnetic Linear Synchronous Motor) that consists of stator modules on the rail and shuttle car. It is desirable to reduce the weight of LMTT in order to control the electronic devices with minimum energy. In this research, structural optimization for a mover of shuttle car is performed to minimize the weight satisfying design criteria. The objective function is set up as weight. On the contrary, the design variables are transverse, longitudinal and wheel beams' thicknesses and its height, and the constraints are considered as strength and stiffness.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.7
• /
• pp.23-30
• /
• 2014

This paper deals with the characteristics of deformation of the underground corrugated steel plate culverts constructed in the areas where the minimum depth of within 1.5 m soil cover is not secured in the bottom of highways. The underground corrugated steel plate culverts at shallow depth are often designed and constructed with the consideration of the minimum depth of soil cover according to the design standards, which was made in order to minimize any deformation. Additionally, if under unfavorable conditions, slabs are set up for stress relaxation to disperse and minimize the weight of loads transferred to the corrugated steel plate culverts. Nevertheless, if the underground corrugated steel plate culverts are built in areas where the minimum depth of soil cover inevitably cannot be secured, there may occur some deformation. In this paper, a research was carried out to identify the characteristics of deformation in areas where the minimum depth of soil cover is not secured. The result shows that there existed the deterioration of pavement and in its smoothness around the corners of slabs for stress relaxation. To this end, this paper studied the structural stability of the underground corrugated steel plate culverts established in the areas with no minimum depth of soil cover secured, with the consideration of causes and solutions of pavement deterioration.