• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.492-497
• /
• 2000

This paper focuses on the weight minimization of radial gate, as an extention of the previous work. Radial gates are commonly used to regulate the flow-rate of general purpose dams, due to its simplicity in manufacture and control. The present study identifies the optimum position of support point for 2 and 3 arm type radial gate, which guarantees the minimum weight satisfying strength constraint condition. These optimum designs are then compared with previously constructed radial gates. The results indicate that the weights of the optimized radial gates reduce by about 20%, compared to those of the conventionally designed radial gates.

• 한국염색가공학회지
• /
• 제18권6호
• /
• pp.25-30
• /
• 2006

Degumming is an essential process to improve the luster and smoothness of the silk filament. Silk varieties were degummed using different methods. A number of methods, from pad-steam to specific alkaline are being used for this propose. In this paper an attempt to compare the efficiencies of different degumming processes has been made. from the results, it may be observed that when silk fabrics were pad-steam, the degree of degumming, as assessed by weight loss. When the pad-steam degumming was carried out at different pHs, adjusted using alkalies, it was observed that at higher pH the weight loss is high. Pad-steam degumming as well as star degumming was found to be superior with minimum damage to the substrate. Among the alkalis used, the sodium carbonate gives the best results, since the weight loss is almost maximum with lower strength loss by over degumming. It is also efficient from the point of view of conservation of heat energy and time as against the comparable star degumming.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1997년도 춘계학술대회 학술발표 논문집
• /
• pp.259-262
• /
• 1997

This paper presents a visual servoing of RV-M2 robot manipulators to track and grasp moving object, using pruned dynamic recurrent neural networks(DRNN). The object is stationary in the robot work space and the robot is tracking and grasping the object by using CCD camera mounted on the end-effector. In order to optimize the structure of DRNN, we decide the node whether delete or add, by mutation probability, first in case of delete node, the node which have minimum sum of input weight is actually deleted, and then in case of add node, the weight is connected according to the number of case which added node can reach the other nodes. Using evolutionary programming(EP) that search the struture and weight of the DRNN, and evolution strategies(ES) which train the weight of neuron, we pruned the net structure of DRNN. We applied the DRNN to the Visual Servoing of a robot manipulators to control position and orientation of end-effector, and the validity and effectiveness of the pro osed control scheme will be verified by computer simulations.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 봄 학술발표회논문집
• /
• pp.135-140
• /
• 1993

The optimum weight design of structure is to determine the combination of structural members which minimize the weight of structures and satisfy design conditions as well. Since most of loads and design variables considered in structural design have uncertain natures, the reliability-based optimization techniques need to be developed. The aim of this study is to estabilish the general algorithm for the minimum weight design of transmission tower structure system with reliability constraints. The sequential linear programming method is used to solve non-linear minimization problems, which converts original non-linear programming problems to sequential linear programming problems. The optimal solutions are produced for various reliability levels such as reliability levels inherent in current standard transmission tower cross-section and optimal transmission tower cross-section obtained with constraints of current design criteria as well as selected target reliability index. The optimal transmission towers satisfying reliability constraints sustain consistent reliability levels on all members. Consequently, more balanced optimum designs are accomplished with less structural weight than traditional designs dealing with deterministic design criteria.

• 대한전자공학회논문지SP
• /
• 제46권3호
• /
• pp.138-142
• /
• 2009

본 논문에서는 보이스 피싱 (Voice Pishing) 예방을 위한 알고리즘을 최소 분류 오차 기법 (Minimum Classification Error)을 기반으로 제한하다. 휴대폰으로 전송되어진 신호를 기반으로 3GPP2 Selectable Mode Vocoder (SMV)의 복호화 과정에서 자동적으로 추출되는 중요 특징벡터를 사용하여 Gaussian Mixture Model (GMM)을 구성하고 이를 기반으로 구해지는 로그(Log) 기반의 우도 (Likelihood)를 사용한 변별적 가중치 학습을 사용하여 보이스 피싱 예방을 위한 검출 알고리즘을 제안하다. 실험 결과 제안된 보이스 피싱 알고리즘이 기존의 방법에 비해 우수한 성능을 보인 것을 알 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1028-1032
• /
• 2004

In order to prevent machine tool feed slide system from transient vibrations during operations, machine tool designers usually adopt some typical design solutions; box-in-box typed feed slides, optimizing moving body for minimum weight and dynamic compliance, and so on. Despite all efforts for optimizing design, a feed drive system may experience severe transient vibrations during high-speed operation if its feed rate control is unsuitable. A rough feed rate curve having discontinuity in its acceleration profile causes a serious vibration problem in the feed slides system. This paper presents a feed rate optimization of a ball screw driven machine tool feed slide system for its minimum vibration. Firstly, a ball screw feed drive system was mathematically modeled as a 6-degree-of-freedom lumped parameter system. Next, a feed rate optimization of the system was carried out for minimum vibrations. The main idea of the feed rate optimization is to find out the most appropriate smooth acceleration profile with jerk continuity. A genetic algorithm was used in this feed rate optimization

• International Journal of Industrial Entomology and Biomaterials
• /
• 제17권2호
• /
• pp.173-180
• /
• 2008

The influence of temperature and relative humidity in infection and cross-infection of Nosema bombycis and N. mylitta respectively in mulberry silkworm, Bombyx mori L. on larval mortality, multiplication of pathogens, larval weight and growth rate in three different seasons were studied. Seasons were selected in such condition, when very less fluctuations between minimum and maximum temperature and minimum and maximum relative humidity ($25{\sim}28^{\circ}C$ and $65{\sim}72%$ R.H) was observed i.e., season-1. Fluctuations between minimum and maximum temperature were less ($28.05{\sim}34.50^{\circ}C$) but R.H % was more ($55{\sim}81%$) in season-2. Fluctuations between minimum and maximum temperature and R.H % were more ($20.00{\sim}40.5^{\circ}C$ and $64.00{\sim}90.00%$) in season-3. Growth rate of microsporidian-infected silkworm is directly related to the prevailing temperature and relative humidity in silkworm. Silkworm can tolerate slight variation of temperature but slight variation of relative humidity disfavours the development of silkworm and favours the multiplication of pathogens.

• 한국가스학회지
• /
• 제17권5호
• /
• pp.69-74
• /
• 2013

본 연구에서는 Mg분진의 분진입경과 승온속도에 따른 열분해 및 발화온도 특성을 실험적으로 조사하였다. 이를 위해 시료는 평균 입경이 서로 다른 38, 142, $567{\mu}m$의 Mg분진을 사용하였다. 실험에서는 열중량분석장치(TGA)와 IEC 61241-2-1규격에 따라 제작한 자연발화온도(MIT) 실험장치를 사용하여 실시하였다. 실험 결과 퇴적 Mg에 있어서 공기중 승온속도가 증가하면 중량개시온도는 증가하였으며, 동일한 승온속도 조건에서 입경의 증가는 발화온도의 증가로 나타났다. 또한 부유 Mg분진의 최저발화온도(MIT)는 평균 입경이 증가할수록 증가하는 경향을 보였다.

• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.389-394
• /
• 2017

선체구조의 보강재로서 비대칭 단면재인 L 형강재가 대칭 단면재인 T형 조립부재(built-up T)에 비해 단면 비틀림 현상 등 다소 불리한 강도 특성에도 불구하고 오랜 관습과 자재 구입의 용이성 등으로 널리 사용되어 왔다. 그러나 근래 선박이 대형화 되어감에 따라 보강재의 형태는 압출 형강재의 사용이 줄고 다양한 설계 치수를 반영하여 용접을 통해 직접 제작하는 조립부재의 적용이 늘어가는 추세이다. 본 연구의 목적은 점차 사용량이 증대되고 있는 조립형 보강재의 효율적인 적용을 위한 최적설계 프로그램을 개발하는데 있다. 최적화 알고리즘으로는 선박 및 해양구조물의 최적설계에 많이 적용되고 있는 진화전략 기법을 선정하였다. 최적설계 결과의 실용성을 위해 부식여유를 고려한 총두께 개념을 설계변수와 목적함수에 도입하였고, 제한조건에는 최근 발효된 통합공통구조규칙(HCSR, Harmonized Common Structural Rules)을 적용하였다. 개발된 최적화 프로그램을 이용하여 최근 수주된 300K VLCC와 158K COT의 실선 설계를 수행한 결과 각각 144톤, 60톤의 중량 절감 효과를 얻었으며 대형 선박일수록 중량 절감 효과가 크게 나타남을 확인하였다.

• 대한족부족관절학회지
• /
• 제12권2호
• /
• pp.185-188
• /
• 2008

Purpose: Zone I fractures of the fifth metatarsal bone can generally be treated by conservative methods while both surgical and conservative methods are used for zone II fractures. However, the clinical results of conservative treatment have been rarely reported. The purpose of this study is to report the clinical results of conservative treatment for zone I and II nondisplaced fractures. Materials and Methods: Between July 2007 and August 2008, consecutive thirty seven patients (38 fractures) with zone I and II fractures of the fifth metatarsal bone were treated with tolerable weight bearing and minimum duration of immobilization based on pain on weight bearing. We evaluated the duration of immobilization, time to clinical and radiographic union, and time to pre-injury activity level. Results: Clinical and radiological union were achieved in all patients without any complications including malunion or nonunion. The mean duration of immobilization was 28.7 days. The mean 33.1 days and 48.9 days were required for clinical union and radiographic union respectively, after the initial injury. The mean time to pre-injury activity level was 4.8 months. Conclusion: Our study shows that the acute nondisplaced zone I, II fracture of fifth metatarsal bone can be treated effectively using tolerable weight bearing and minimum duration of immobilization, which is based on the pain on weight bearing.