• Restorative Dentistry and Endodontics
• /
• 제49권1호
• /
• pp.3.1-3.8
• /
• 2024

This article is a narrative review that discusses the recommended sample size requirements to design a pilot study to assess the reliability of a questionnaire. A list of various sample size tables that are based on the kappa agreement test, intra-class correlation test and Cronbach's alpha test has been compiled together. For all calculations, type I error (alpha) was set at a maximum value of 0.05, and power was set at a minimum value of 80.0%. For the kappa agreement test, intra-class correlation test, and Cronbach's alpha test, the recommended minimum sample size requirement based on the ideal effect sizes shall be at least 15, 22, and 24 subjects respectively. By making allowances for a non-response rate of 20.0%, a minimum sample size of 30 respondents will be sufficient to assess the reliability of the questionnaire. The clear guideline of minimum sample size requirement for the pilot study to assess the reliability of a questionnaire is discussed and this will ease researchers in preparation for the pilot study. This study provides justification for a minimum requirement of a sample size of 30 respondents specifically to test the reliability of a questionnaire.

• The Korean Journal of Ecology
• /
• 제21권5_1호
• /
• pp.409-418
• /
• 1998

A molel study was conducted to determine the optimal sample size for the analysis of the aquatic insect community in a stream reach of the Pangtae Creek, Kangwon-do in October 1995 and may 1996. The results showed that the required minimum sample size varied and depended on the purposes of the community analysis. Acoording to the Species: Area Curve method, at least 16 Surber samplings ($30{\times}30cm$) were required in a stream reach in each spring and fall survey. The species diversity index did not vary significantly as the sample size increased. Based on the coefficient of variation analysis, the minimum sample sizes of 10 were required in order to compare seasonal differences of the community in the study area. Considering the static community structure of aquatic insects, including both species numbers and individual numbers of aquatic insects, 11 and 7 samplings were optimal sizes for the fall and spring survey, respectively. We concluded that 12 Surber samplings from 3 riffle-pool sequences (4 samplings at each riffle-pool sequence) would be required in a stream reach (length 1 km) to obtain reliable as well as cost efficient data. Our model showed that the optimal sample size should be determined by interactions between minimum sample size, the degree of data reliability, and cost efficiency.

• Restorative Dentistry and Endodontics
• /
• 제49권2호
• /
• pp.21.1-21.8
• /
• 2024

Objectives: This paper aims to serve as a useful guide for sample size determination for various correlation analyses that are based on effect sizes and confidence interval width. Materials and Methods: Sample size determinations are calculated for Pearson's correlation, Spearman's rank correlation, and Kendall's Tau-b correlation. Examples of sample size statements and their justification are also included. Results: Using the same effect sizes, there are differences between the sample size determination of the 3 statistical tests. Based on an empirical calculation, a minimum sample size of 149 is usually adequate for performing both parametric and non-parametric correlation analysis to determine at least a moderate to an excellent degree of correlation with acceptable confidence interval width. Conclusions: Determining data assumption(s) is one of the challenges to offering a valid technique to estimate the required sample size for correlation analyses. Sample size tables are provided and these will help researchers to estimate a minimum sample size requirement based on correlation analyses.

• 한국항해항만학회지
• /
• 제38권6호
• /
• pp.689-694
• /
• 2014

The Korean government has introduced and enforced maritime traffic safety assessment to secure traffic safety since 2010. The maritime traffic safety assessment is needed by law to design a new port or modify an existing one. According to Korea Maritime Safety Act, in the assessment the propriety of marine traffic system consists of the safety of channel transit and berthing/unberthing maneuver, safety of mooring, and safety of marine traffic flow. The safety of channel transit and berthing/unberthing maneuver can be evaluated only by ship-handling simulation. The ship-handling simulation is carried out by sea pilots working with the port concerned. The vessel's proximity measure is an important factor to evaluate traffic safety. The proximity measure is composed of vessel's closest distance to channel boundary and probability of grounding/collision. What is more, the probability of grounding becomes important. According to central limit theorem, a sample has a normal distribution on condition that its size is more than 30. However, more than 30 simulation runs bring about the increase of assessment period and difficulty of employing sea pilots. Therefore this paper is to find out minimum sample size for evaluating vessel's proximity. First sample sets of size of 3, 5, 7, 9 etc. are selected randomly on the basis of normal distribution. And then KS test for goodness of fit and t-test for confidence interval are applied to each sample set. Finally this paper decides the minimum sample size. As a result this paper suggests the minimum sample size of 5, that is, the simulation of more than five times.

• 한국안전학회지
• /
• 제16권3호
• /
• pp.83-88
• /
• 2001

This study was preformed by measuring the minimum ignition temperature of MBS according to the change of sample vessel size and the minimum ignition temperature of MBS dust cloud The minimum ignition temperature of MBS product decreased as the vessel size was large, and it was obtained in the range from $120.5^{\circ}C$ to $94.5^{\circ}C$ and the apparent activation energy was obtained with 32.94Kcal/mol. The minimum ignition temperature of MBS dust cloud was measured by using Godbert-Greenwald furnace and it was obtained at $407^{\circ}C$ with the sample of 0.4g in the air and the ignition of dust cloud was not occurred below 13% oxygen concentration.

• Journal of the Korean Data and Information Science Society
• /
• 제20권5호
• /
• pp.887-894
• /
• 2009

The two-stage minimum risk point estimation of mean, the probability of success in a sequence of Bernoulli trials, is considered for the case where loss is taken to be symmetrized relative squared error of estimation, plus a fixed cost per observation. First order asymptotic expansions are obtained for large sample properties of two-stage procedure. Monte Carlo simulation is carried out to obtain the expected sample size that minimizes the risk and to examine its finite sample behavior.

• Environmental Engineering Research
• /
• 제13권2호
• /
• pp.73-78
• /
• 2008

For a given soil-contaminated site, a level of soil contamination is characterized and decisions on risk may be made from the risk assessment. The study evaluated critical design factors for the determination of sample size in the sampling design plan and the assessment of soil contaminant- leaching to groundwater. Two variables, the minimum relative detectable difference (T) and coefficient of variation (CV) were evaluated for the sample size determination. The minimum number of samples can be appropriately determined by CV under a T value greater than or equal to 0.2. Soil-contaminant leaching to groundwater was evaluated by using the Soil Screening Level equation of U.S. Environmental Protection Agency and the Risk Based Screening Level equation of American Society for Testing and Materials, with the same input parameters. The groundwater concentrations estimated from soil contaminant concentrations were significantly affected by the Darcy velocity of groundwater and the organic content of soil.

• 대한안전경영과학회지
• /
• 제9권2호
• /
• pp.123-134
• /
• 2007

This paper focuses on the in-house reliability assurance plan for the bulk materials of each company. The reliability assurance needs in essence a long time and high cost for testing the materials. In order to reduce the time and cost, accelerated life test is adopted. The bulk sampling technique was used for acceptance. Design parameters might be total sample size(segments and increments}, stress level and so on. We focus on deciding the sample size by minimizing the asymptotic variance of test statistics as well as satisfying the consumer's risk. In bulk sampling, we also induce the sample size by adapting the normal life time distribution model when the variable of the lognormal life time distribution is transformed and adapted to the model. In addition, the sample size for both the segments and increments can be induced by minimizing the asymptotic variance of test statistics of the segments and increments with consumer's risk met. We can assure the reliability of the mean life and B100p life time of the bulk materials by using the calculated minimum sample size.

• 대한수의학회지
• /
• 제48권4호
• /
• pp.457-462
• /
• 2008

The objective of this study was to determine appropriate sample size that simulated different assumptions for diagnostic test characteristics and true prevalences when designing serological surveillance plan for pullorum disease and fowl typhoid in domestic poultry production. The number of flocks and total number of chickens to be sampled was obtained to provide 95% confidence of detecting at least one infected flock, taking imperfect diagnostic tests into account. Due to lack of reliable data, within infected flock prevalence (WFP) was assumed to follow minimum 1%, most likely 5% and maximum 9% and true flock prevalence of 0.1%, 0.5% and 1% in order. Sensitivity were modeled using the Pert distribution: minimum 75%, most likely 80% and maximum 90% for plate agglutination test and 80%, 85%, and 90% for ELISA test. Similarly, the specificity was modeled 85%, 90%, 95% for plate agglutination test and 90%, 95%, 99% for ELISA test. In accordance with the current regulation, flock-level test characteristics calculated assuming that 30 samples are taken from per flock. The model showed that the current 112,000 annual number of testing plan which is based on random selection of flocks is far beyond the sample size estimated in this study. The sample size was further reduced with increased sensitivity and specificity of the test and decreased WFP. The effect of increasing samples per flock on total sample size to be sampled and optimal combination of sensitivity and specificity of the test for the purpose of the surveillance is discussed regarding cost.

• Journal of Mechanical Science and Technology
• /
• 제18권5호
• /
• pp.838-846
• /
• 2004

Minimum ignition energies of hydrogen/air and methane/air mixtures have been investigated numerically by solving unsteady one-dimensional conservation equations with detailed chemical kinetic mechanisms. Initial kernel size needed for numerical calculation is a sensitive function of initial pressure of a mixture and should be estimated properly to obtain quantitative agreement with experimental results. A simple macroscopic model to determine minimum ignition energy has been proposed, where the initial kernel size is correlated with the quenching distance of a mixture and evaluated from the quenching distance determined from experiment. The simulation predicts minimum ignition energies of two sample mixtures successfully which are in a good agreement with the experimental data for the ranges of pressure and equivalence ratio.