• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.764-777
• /
• 2014

This study analyzes the mathematical relationship between DC-link voltage and system parameters for shunt active power filters (APFs). Analysis and mathematical deduction are used to determine the required minimum DC-link voltage for APF. A novel adaptive DC-link voltage controller for the three-phase four-wire shunt APF is then proposed. In this controller, the DC-link voltage reference value will be maintained at the required minimum voltage level. Therefore, power consumption and switching loss will effectively decrease. The DC-link voltage can also adaptively yield different DC-link voltage levels based on different harmonic currents and grid voltage levels and thus avoid the effects of harmonic current and grid voltage fluctuation on compensation performance. Finally, representative simulation and experimental results in a three-phase four-wire center-split shunt APF are presented to verify the validity and effectiveness of the minimum DC-link voltage design and the proposed adaptive DC-link voltage controller.

• 전력전자학회논문지
• /
• 제6권2호
• /
• pp.191-201
• /
• 2001

현재 산업용, 가정용 전동기의 수요는 급증하고 있다. 이는 스위칭 소자와 제어기술의 현저한 진보가 있었기 때문이며 이중 BLDC 전동기의 사용이 증가하고 있다. 그러나 일반적으로 사용되고 있는 3상 BLDC 전동기 맥동토크가 크고 속도변화에 민감하며 높은 속도에 적용하는데 한계가 있다. 이러한 문제를 해결하기 위해서는 전동기의 상과 극수, 슬롯수를 증가시켜야만 한다. 그래서 현재 다상 BLDC 전동기의 연구가 진행중에 있다. 하지만 다상 BLDC에서는 높은 스위칭 주파수로 인해서 일반적으로 쓰고 있는 히스테리시스 전류제어기를 제안하였고 7상 BLDC 전동기에 적용하여 시뮬레이션과 실험을 통해서 타당성을 입증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1862-1866
• /
• 2003

A control system design with Coefficient Diagram Method (CDM) is proven that effective for SISO control design. But the control system design for MIMO via CDM is not concrete procedure. In this paper presents the control system design method for quadruple-tank process via CDM. By using the decentralized method for both non-minimum phase and minimum phase are made. The results from Integral-Proportional (I-P) controller’s design via CDM and standard Proportional-Integral (PI) controls are also shown to compare the merits of the proposed controllers.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.418-423
• /
• 1992

In this paper, a model reference adaptive control algorithm is applied to the design of the normal acceleration controller for missiles with nonminimum-phase characteristics. The method used in this paper is due to Ohkubo. In this scheme, a feedforward compensator is designed first so that the extended system becomes minimum-phase and after that an adaptive control algorithms is designed for the extended system. The feedforwrd compensator is obtained by solving the robust stabilization problem. It is shown that the performance of the designed controller is satisfied via computer simulation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권3호
• /
• pp.388-394
• /
• 2003

Hydraulic system is difficult to obtain a suitable performance due to the nonlinearity load pressure change and system parameter variation. The requirement of control a1gorithm has been complex in order to satisfy the performance. The adaptive control is a control method which is suggested to achieve the control object under the plant characteristics change. In spite of the case that plant characteristics and the degree of variation are difficult to grasp. the adaptive control could keep the characteristics of closed-loop system generally. In this study. a method of combined generalized minimum variance adaptive control (GMVAC) and output error feedback is proposed, in order to solve the problem of non-minimum phase of plant and the vibration and overshoot in initial response. The control performance according to the variation of characteristics of plant is evaluated by changing the supply pressure. The experimental results show the effectiveness of the proposed scheme.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.213-214
• /
• 2008

This paper considers design of a robust controller that alleviates disturbance effects and compensates performance degradation of plants with time-delay. Disturbance observer(DOB) approach as a tool of robust control has been widely employed in industry. However, since the time-delay makes the plant non-minimum phase, classical DOB cannot be applied directly to the time-delay system. By using a new DOB structure for non-minimum phase systems together with the Smith Predictor, we propose a new control algorithm for reducing the effects of disturbance and time-delay of the system.

• 융합신호처리학회논문지
• /
• 제2권1호
• /
• pp.95-100
• /
• 2001

본 논문에서는 불확실성을 갖는 비선형 시스템에 제어기를 설계하기 위해서 출력제환 선형화 방법을 통하여 비선형 시스템을 선형시스템으로 변환하고 슬라이딩 모드 제어기법을 사용하여 파라미터들을 갱신하고 이를 통하여 제어입력을 갱신하는 강인성제어기를 제안하고자 한다. 비선형시스템은 최소 위상시스템이고, 시스템의 상대차수는 r＜n 이며, 제로 다이나믹스는 안정하다고 가정한다. 제안된 제어기에 대해서 대역적 점근적 안정도가 보장됨을 보였으며, 제안된 제어기에 대해서 컴퓨터 시뮬레이션을 통하여 타당성을 검증하였다.

• 전자공학회논문지SC
• /
• 제39권6호
• /
• pp.1-8
• /
• 2002

본 논문에서는 시간지연이 존재하고 시스템의 영점이 단위원 밖에 있으며 시스템 파라미터가 변하는 비선형 시스템에 적응하는 신경회로망을 이용한 PID구조를 갖는 일반화 최소분산 자기동조제어기를 제안한다. 신경회로망은 제어기 파라미터를 추정하며 제어 출력은 추정된 제어기 파라미터로부터 얻어진다. 제어 알고리듬의 타당성을 확인하기 위해 시간 지연이 있고 일정한 시간이 경과한 후 시스템의 파라미터가 변하는 비선형 비최소위상 시스템에 대해 컴퓨터 시뮬레이션을 하였다. 그리고 신경회로망을 이용한 직접 적응 제어기와 비교하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.437-442
• /
• 2000

An alternative inverse feedback structure for adaptive active control of periodic noise is introduced for systems with nonminimum phase cancellation path. To obtain the inverse model of the nonminimum phase cancellation path, the cancellation path model can be factorized into a minimum phase term and a maximum phase term. The maximum phase term containing unstable zeros makes the inverse model unstable. To avoid the instability, we alter the inverse model of the maximum phase system into an anti-causal FIR one. An LMS predictor estimates the future samples of the noise, which are necessary for causality of both anti-causal FIR approximation for the stable inverse of the maximum phase system and time-delay existing in the cancellation path. The proposed method has a faster convergence behavior and a better transient response than the conventional FX-LMS algorithms with the same internal model control structure since a filtered reference signal is not required. We compare the proposed methods with the conventional methods through simulation studies.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.399-409
• /
• 2003

The first esterification reactor in the continuous polymerization of poly(ethylene terephthalate) has been analyzed by solving the material balances for the two-phase system with respect to the solubility of terephthalic acid. The Newton-Raphson method was used to solve the material balance equations instead of the Simplex method that is frequently used for finding a minimum point of a residual rather than a solution of an equation. A solution for the material balance equations, with the constraint of non-zero liquid phase fraction, could not be obtained with the solubility data of Yamada et al., but could be obtained with solubilities over a minimum value that is larger than their data. Thus, the solubility data of Yamada et al. are considered to be too small. On the other hand, the solubility data of Baranova and Kremer are so large that they gave a solution with the liquid phase only. Based on our results, several typical solubility curves satisfying the constraint of a non-zero liquid phase fraction are suggested in this study; we studied the reaction characteristics of the system using these curves. A higher temperature and a lower pressure are preferred for reducing the content of diethylene glycol.