• 한국항해항만학회지
• /
• 제33권1호
• /
• pp.1-7
• /
• 2009

항행속력규제는 통항안전성을 확보하기 위한 중요한 요소로서, 지금까지는 최고속력규제에 대하여만 연구 검토되어지고 있다. 최근 우리나라 항만에서는 중량물 운반용 예부선 등을 포함한 저속 항행선박으로 인하여 선박운항자의 위험부담감은 점점 증가하고 있다. 본 연구에서는 이러한 저속선박에 대한 최저속력 규제의 필요여부와 교통용량별 적정 최저속력을 산출하여 제안하였다. 이 연구의 구체적인 결과는 다음과 같다. (1) 시간당 통항척수가 5척의 경우에 최저속력을 5kts 이상으로 설정하면 속력규제 효과가 높다 (2) 시간당 통항척수가 10척 이상의 경우에 최저속력을 7kts로 설정하여야 속력규제 효과가 다소 있다 (3) 반면에, 통항척수가 많은 해역에서는 상대속력차가 적은 선박이 다수 발생하여, 선박 간 좁은 이격거리로 장시간 항행하여야 하므로 최저속력규제의 효과가 없는 것으로 판단된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.171-175
• /
• 1998

This paper proposes a speed sensorless vector control of induction motor using a minimum-order EKF(extended kalman filter). Minimum-order EKF has the advantage of reducing the computational estimation cost because the stator current is not estimated. EKF does not deteriorate the performance of the overall speed control system, even though the measurements are relatively noisy. The estimated rotor speed is used for vector control and overall speed control. Computer simulations of the speed sensorless vector control are carried out to test the usefulness of the minimum-order EKF algorithm.

• 한국국방경영분석학회지
• /
• 제24권2호
• /
• pp.162-169
• /
• 1998

This study presents an single machine scheduling algorithm minimize lateness of product by controlling machining speed. Generally, production scheduling uses the information of process planning. But the production scheduling algorithm has not considered the control of machining speed in its procedures. Therefore, the purpose of this study is to consider the machining speed in production scheduling algorithm for efficient production scheduling. Machining time and machining cost required to manufacture a piece of a product are expressed as a unimodal convex function with respect to machining speed, so it has minimal point at minimum time speed or the minimum cost speed. Therefore, because of considering the machining cost, the control of machining speed for the algorithm is executed between minimum speed and maximum speed. An example is demonstrated to explain the algorithm.

• 한국운동역학회지
• /
• 제16권1호
• /
• pp.11-17
• /
• 2006

The purpose of this study was to evaluate the smoothness of movement during various walking speeds. Based on the maximum smoothness theory (or the minimum jerk theory), we hypothesized that the walking speed at the maximum smoothness (or minimum normalized jerk) is the same as that at the minimum energy consumption. Eleven university students participated in treadmill walking experiment with 11 different walking speeds (1.11, 1.19, 1.25, 1.33, 1.56, 1.78, 1.9, 2, 211, 233, and 2.47m/sec). Normalized jerk at 15 markers and the center of mass was calculated. Results showed that there existed a quadratic relationship between the normalized jerk of the vertical direction at the center of mass and the walking speed As the walking speed increased, the normalized jerk of all directions at the heel decreased Our hypothesis that the previously published energetically optimal walking speed ($1.25\;{\sim}\;1.4m/s$) is the same as the minimum jerk speed (1.78m/s) did not agree with this result. The minimum normalized jerk at the center of mass occurred at the walking speed of 1.78m/s which was the preferred walking speed by subjects' questionaries. Further studies concerning the energetically optimal walking speed, preferred walking speed, and walk-run transition speed or run-walk transition speed are necessary based on actual energy consumption experiment and various multi-dimensional analysis.

• 한국항공운항학회지
• /
• 제16권3호
• /
• pp.1-6
• /
• 2008

The stalling speed flight test of light airplane, ChangGong-91, was performed to acquire the certification. With power-off engine condition, the wings level stall flight tests were conducted at the aircraft configuration of various flap angle - clean, 20degree, and full flap, respectively. They were performed considering with the combination of the maximum and minimum test weight, and forward and afterward center of gravity. The stalling speeds and the minimum speeds of light airplane were determined from the results of flight test. Also, the appropriateness of stall warning speeds are evaluated through the flight test measures. The airplane is recoverable only with pitch control and engine throttle from stall state without exceptional operation.

• 한국도로학회논문집
• /
• 제19권3호
• /
• pp.45-55
• /
• 2017

PURPOSES: The objective of this study is to estimate required minimum spacing between Freeway IC for high-speed roadways. METHODS : Since high-speed roadways with over 140 km/h design speed do not exist in Korea, VISSIM Simulation Program was used for analysis. Acceleration noise and conflicts were selected for Evaluation Index. Standard deviation size for acceleration and deceleration was calculated by VISSIM to estimate acceleration noise. Conflicts were produced in areas between Freeway IC with SSAM. RESULTS : As a result, required minimum spacing was 6 km for acceleration noise analysis, while 5 km was deducted for conflict analysis. For Model Evaluation, with SAS, conflicts did not show much difference in 5~6 km area by 90% confidence interval. CONCLUSIONS : For acceleration noise, results showed lacking in its discrimination between index per Minimum Spacing. However, conflicts were valid in difference; required minimum spacing was 5 km by validation result.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2019년도 추계학술대회
• /
• pp.141-143
• /
• 2019

VTS(Vessel Traffic Service)는 해양사고의 감소와 항만 시설의 효율적인 이용 측면에서 해상교통의 효율성을 증대한다. 이는 항만 및 수로는 각 수용능력이 있으며, VTS의 적절한 교통 관리를 통해 안전하게 그 수용능력에 맞출 수 있다는 것을 의미한다. 적절한 교통 관리는 선박의 수로 및 항만 내 불필요한 대기를 줄일 수 있으며, 이는 곧 선사나 항만터미널의 경제적 이익으로 이어질 수 있다. 한편, 우리나라 항만이나 수로는 안전을 위한 최고속력의 제한이 있으나 최저속력에 대한 규제는 없다. 그러나 항만 및 수로에서 저속으로 운항하는 선박은 운항 가능한 항로를 장시간 점용할 수 있는 가능성이 있어 효율적인 항만 운영에 방해의 요소가 될 수도 있다. 그러므로 본 연구는 효율적인 항만 및 수로 이용을 위해 선박의 최저속력을 제안하는 것을 목적으로 한다. 이를 위해 현행 법률 및 제도를 검토하고 대기행렬 이론을 이용해 항로 내 적정 최저속력을 제안했다.

• 산업경영시스템학회지
• /
• 제19권39호
• /
• pp.293-299
• /
• 1996

The breakdown of machines lead to the lateness of parts and the change of schedules. Its treatment is very important problem in the shop floor control system. In this study, we present an algorithm minimize the lateness, earliness and change of schedule by controlling machining speed of available machines. Production time and production cost required to manufacture a piece of product are usually expressed as a unimodal convex fuction with respect to machining speed, and each has its minimal point at the minimum time speed or the minimum cost speed, and a speed range between these two speeds is called 'efficiency speed range'. Therefore, the algorithm determines the machining speed in the efficiency speed range. An example is demonstrated to explain the algorithm.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2325-2334
• /
• 2023

To study the lubrication performance of tilting-pad thrust bearing (TPTBs) during start-up in nuclear pump, a hydrodynamic lubrication model of TPTBs was established based on the computational fluid dynamics (CFD) method and the fluid-structure interaction (FSI) technique. Further, a mesh motion algorithm for the transient calculation of thrust bearings was developed based on the user defined function (UDF). The result demonstrated that minimum film thickness increases first and then decreases with the rotational speed under start-up condition. The influence of pad tilt on minimum film thickness is greater than that of collar movement at low speed, and the establishment of dynamic pressure mainly depends on pad tilt and minimum film thickness increases. As the increase of rotational speed, the influence of pad tilt was abated, where the influence of the moving of the collar dominated gradually, and minimum film thickness decreases. For TPTBs, the circumferential angle of the pad is always greater than the radial angle. When the rotational speed is constant, the change rate of radial angle is greater than that of circumferential angle with the increase of loading forces. This study can provide reference for improving bearing wear resistance.

• 대한교통학회지
• /
• 제12권1호
• /
• pp.55-73
• /
• 1994

The objective of this research is to evaluate the pedestrian signal time involving green and flashing green times. The minimum pedestrian green indication should give time for pedestrian to start crossing safely, and the flashing green indication should give time to complete the crossing. An average pedestrian crossing speed of 1.1(m/s) was estimated by analyzing the field data which was slower than the 1.2(m/s) currently used. Furthermore, the study proposed that design speed for the flashing green time should be slow speed for considerations pedestrian safety, not the average speed. The 0.78-1.01(m/s) of pedestrian speed was estimated at the elementary school areas that indicated 0.2(m/s) slower than the other areas. The pedestrian starting time (perception/reaction time) and time headway from front to back of herd was estimated to determine minimum pedestrian green time. the pedestrian starting time was estimated to determine minimum pedestrian green time. The pedestrian starting time was ranged 2.52-4.29 seconds. The time interval between the pedestrian rows was found to be 1.25-1.86 seconds, which declines as the pedestrian rows increases, The equation to calculate the pedestrian signal, which declines as the pedestrian rows increases. The equation to calculate the pedestrian signal time is proposed using the pedestrian starting time, the time interval between the pedestrian rows, and pedestrian crossing speed given area types (commercial, business, mixed, and elementary school areas), number of both-directional pedestrians for a cycle, crosswalk length and width.