• 제목/요약/키워드: Minimum Quantity

검색결과 252건 처리시간 0.024초

해상 부유식 1MW 해수온도차발전 시스템의 라이저 설계 (Design of Riser in 1MW OTEC system mounted on Floating Barge)

  • 권용주;정동호;김현주
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제18권1호
    • /
    • pp.22-28
    • /
    • 2015
  • 1 MW 해수온도차발전 시스템의 라이저에 관한 설계를 수행한다. 라이저의 직경은 1 MW 발전을 위한 심층수 취수량에 기초하여 결정되고, 관종은 제작 가능한 상업용 파이프를 대상으로 종류별 특성을 분석한 후 선정한다. 강관, GFRP관, 그리고 HDPE관 중 HDPE관을 선정하며, 선정된 관종의 중량과 강도를 보강하기 위하여 설계를 수행한다. HDPE 라이저 하부 끝단에 중량체를 설치하여 중량을 보강하며, HDPE 라이저 축방향으로 와이어로프를 설치하여 강도를 보강한다. 중량체의 중량은 GFRP관 무게 대비 25%와 50%가 되도록 설계되며, 라이저 끝단에 연결되는 중량체의 모든 하중은 와이어로프가 지지하도록 설계된다. 설계된 HDPE라이저는 연중 온도차발전이 가능한 하와이 인근 해역에 설치되는 것으로 가정하여, 수치해석적 방법에 의한 안전성 평가를 수행한다. 안전성이 검증된 HDPE 라이저에 대하여 경제적으로 가장 유리한 HDPE 라이저의 최종 제원을 결정한다. 설계된 라이저는 향후 1MW 해수온도차발전 시스템 실증을 위한 설계 자료로 활용될 수 있을 것으로 기대된다.

금강유역의 유역통합수자원관리를 위한 저수지 운영률 개발 및 적용성 검토 (Development and Validation of Reservoir Operation Rules for Integrated Water Resources Management in the Geum River Basin)

  • 정태성;강신욱;황만하;고익환
    • 한국수자원학회논문집
    • /
    • 제41권4호
    • /
    • pp.433-444
    • /
    • 2008
  • 최근의 유역통합관리는 용수공급, 수력발전, 그리고 유지용수 등과 같은 기존의 운영방안과 더불어 수량, 수질, 생태계 보호를 함께 고려해야만 하는 등 운영목적이 복잡해지고 시스템 또한 대규모화 되고 있다. 더불어 용수이용 혹은 유역간 서로 상충되는 이해관계가 발생함에 따라 물이용의 효율성을 극대화할 수 있는 범 유역 단위의 수자원 계획 및 운영이 필요하게 되었다. 최적화 모형의 현실 활용 기회를 높이고, 수자원관리의 다양한 운영목적을 수자원 운영에 반영하기 위하여 본 연구에서는 저수지 운영률을 개발하고 이를 적용하기 위한 KModSim의 수문학적상태방법에 대한 적용성을 검토하였다. 본 연구에서 개발된 운영률은 전체적으로 용담댐과 대청댐의 실적저류량을 잘 재현하는 것으로 나타났으며, 이를 최적화 모형에 활용한다면 관행적으로 적용해온 물수지 분석 방법을 개선할 뿐만 아니라 유역통합수자원관리가 가능할 것으로 기대된다.

도저 정지작업 시 머신 가이던스 시스템 적용에 따른 토공성과 향상 사례분석 (Performance Effectiveness Case Study of the Machine Guidance System for Dozer Eartwrok Grading Work)

  • 문성우;김상태
    • 한국건설관리학회논문집
    • /
    • 제21권1호
    • /
    • pp.78-86
    • /
    • 2020
  • 도저는 고가의 건설장비로서 건설토공현장 정지작업에서 커다란 영향을 가져온다. 이러한 중요성에 따라서 머신 가이던스 시스템이 도저에 적용되어 토공 정지작업의 성과를 올리기 위한 노력이 진행되고 있다. 머신 가이던스 시스템은 정지작업 시 장비기사에게 정지작업에 필요한 굴삭깊이, 경사각도 등 정보를 제공하며, 장비기사는 제공되는 정보를 이용하여 측량기사의 도움을 최소화 하면서 정지작업을 진행할 수 있다. 이와 같이 머신 가이던스 시스템은 장비기사가 계획도면 상의 계획고에 맞추어 정지작업을 수행할 수 있도록 돕는 기능을 제공한다. 본 논문의 목적은 머신 가이던스 시스템이 기존 토공 정지작업과 비교하여 토공 정지작업에 가져오는 성과향상을 분석하는 것이다. 성과분석은 1) 생산성과 2) 정확도 2가지 관점에서 수행됐다. 여기서 생산성은 단위시간에 도출되는 작업량을 나타내며, 정확도는 계획도면에서 요구하는 계획고에서 벗어나는 정도를 나타낸다. 본 연구목적을 달성하기 위해 도저 머신 가이던스 시스템을 테스트 현장에 적용했으며, 적용결과 머신 가이던스 시스템이 전통적인 방법과 비교하여 생산성의 경우 46.59%, 정확도의 경우 46.96%만큼 증가되는 성과향상을 확인할 수 있었다.

폐기단계에서 LCI DB구축을 위한 CO2 발생량에 관한 연구 (A Study on CO2 Emissions to Establish a LCI DB at the Disuse Stage)

  • 최두성;박진종;전흥찬
    • KIEAE Journal
    • /
    • 제13권5호
    • /
    • pp.103-110
    • /
    • 2013
  • This study aims to calculate the $CO_2$ emissions by the properties of construction waste to establish a LCI DB of construction waste generated at the disuse stage. The $CO_2$ emissions from apartment houses was calculated by calculating the energy consumptions by treatment steps to calculate the $CO_2$ emissions by the treatment steps of construction waste. As a result of analyzing the $CO_2$ emissions from a total of 27 complexes, maximum 46,791g-$CO_2/m^2$, minimum 34,893g-$CO_2/m^2$ and average 38,713g-$CO_2/m^2$ were generated, and were varied by the quantity of construction waste in general, but were affected by the transportation distance in case of transportation steps as well. As a result of analyzing the $CO_2$ emissions by the properties of construction waste, average 19,815.50g-$CO_2/m^2$ was generated, the highest, from the example complex at the demolition stage in case of construction wastes, and 1.72g-$CO_2/m^2$ was generated, the lowest, during reclamation. In case of combustible waste, average 11,495.63g-$CO_2/m^2$ was generated, the highest, from the example complex during incineration of wastes, and 21.48g-$CO_2/m^2$ was generated, the lowest, at the waste transportation stage. In case of noncombustible waste, average 522.43g-$CO_2/m^2$ was generated, the highest, from the example complex at the demolition stage, and 1.07g-$CO_2/m^2$ was generated, the lowest, at the transportation stage. In case of other construction wastes, average 645.42g-$CO_2/m^2$ was generated, the highest, from the example complex at the demolition stage, and 47.38g-$CO_2/m^2$ was generated, the lowest, at the middle treatment stage.

우리나라 대학도서관(大学図書館)에 관(関)한 고찰(考察) -1924년(年)~1941년대(年代)를 중심(中心)으로- (STUDY ON THE KOREAN UNIVERSITY LIBRARIES FROM 1924-1945)

  • 윤승현
    • 한국비블리아학회지
    • /
    • 제5권1호
    • /
    • pp.133-164
    • /
    • 1981
  • "Jonkyongkak" which King, Sungjong of Yi dynasty established within Sungkyunkwan in 1475 is regarded as the first university library in Korea. On the basis of modern librarianship, however, it is desirable to recognize the fact that Keijo Imperial University Library is really the first university library in Korea. In this thesis, an attempt to study the Korean university libraries under the period of Japanese control is provided. Keijo Imperial University Library is the key institution in this study. This study will focus to review the following facts: 1) the historical background of Keijo. Imperial University Library; 2) the organization and staffing pattern, and budget of this library; 3) the acquisition policy and basic collection development plan of this library; 4) the library and other services of this library including readers services; 5) the relationship with other private college libraries; and 6) the impact of this library on the present Seoul National University Library. The followings are the outlined conclusions: 1. Japanese Government had established Keijo Imperial University Library in order to perform the colonial education policy of Korean peninsula. Furthermore, it was one of the import supporting agencies for the research activities which were necessary for Japan to govern the Southeast Asia including Korean Peninsula 2. The organization and staffing size and pattern of this library are much below to those of modern university libraries. They are somewhat below to the level which is necessary to perform the minimum basic library functions. 3. The priorities of book collection of this library are 1) humanities and social sciences especially, materials on Law are much emphasized; 2) pure sciences and 3) technologies and agriculture. Therefore, the quantity of the materials on the field of technology and agriculture is very small. 4. The acquisition policies of this library are deeply influenced by the Japanese Government's colonial policy of Korean peninsula and her aggressive policy of Chinese Continent. 5. The major contribution of this library to the present Seoul National University Library is the transfer of 550,000 volumes of books and library building, but this building is now removed according to the transfer of Seoul National University Campus. 6. The staffing pattern of this library was, however, much ahead of that times. Especially, the facts that professional librarians were eligible to be appointed as the director of this library, and they had the faculty membership including faculty rank should be highly appreciated.

  • PDF

LNG-FSRU용 재기화 시스템의 열원 온도 및 기화성능의 변동에 따른 시스템 특성분석 (An analysis on the characteristics of regasification system for LNG-FSRU depending on the changes in performance with vaporization and temperature of the heat source)

  • 이윤호;김유택;강호근
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제38권6호
    • /
    • pp.625-631
    • /
    • 2014
  • 본 연구에서는 최근 LNG를 사용하는 화력발전소가 증가함에 따라 등장한 LNG-FSRU (Floating Storage Regasification Unit)에서 LNG를 육상에 있는 소비자에게 기체 상태로 전달하기 위해 Topside에 설치된 재기화 시스템의 열원온도 및 기화성능의 변동에 따른 시스템의 특성분석에 관한 연구이다. 시스템 특성분석을 위하여 LNG가 재기화 할 때 필요한 열원으로써 해수를 사용하는 기화방식과 에틸렌글리콜을 사용하는 기화방식으로 나누어 $-157.9^{\circ}C$, 10,400kPa의 LNG를 시간당 200ton 기화시키는 시스템을 구성하였고, 이때 공급되는 해수온도에 따라 필요한 해수의 최소유량 값을 구하였다. 그리고 에틸렌글리콜을 사용하는 기화방식에서는 지역 및 계절 등의 요인으로 인해 해수온도가 낮아질 경우를 대비하여 $174.5^{\circ}C$, 775kPa의 보일러 스팀을 추가열원으로 설치된 시스템을 구성하고, 필요한 스팀의 생성량을 기화성능에 따라 비교분석함으로써 해수온도 변화에 따라 요구되는 보일러 스팀의 양과 기화성능의 변화에 따른 해수 및 에틸렌글리콜 그리고 스팀의 양을 구하였다.

Analysis of Solar Irradiance Measurement From a Multi-Filter Radiometer At Kwangju, South Korea.

  • Ogunjobi, K.O.;Kim, Y.J.;He, Z.;Ryu, S.Y.
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2001년도 추계학술대회 논문집
    • /
    • pp.335-335
    • /
    • 2001
  • Direct-normal, total horizontal and diffuse horizontal irradiance data obtained from a multi-filter rotating shadowband radiometer over seven different wavelength bands (416nm, 151nm, 616nm, 675nm, 870nm and 940nm and the entire spectrum) has been analyzed at Kwangju, South Korea from June 1998 December 2000. The maximum hourly global radiation flux ranged from 0.44 MJ/$m^2$ to 2.68 MJ/$m^2$ at around 11:00-12:00 Hr local time while the maximum hourly diffuse radiation flux ranged from about 0.96 MJ/$m^2$ to 1.37 MJ/$m^2$. The maximum hourly direct irradiance ranged from 1.42 MJ/$m^2$ to 2.92 MJ/$m^2$ from June1998-2000. During the period under consideration, the average monthly global radiation recorded were 13.09 MJ/$m^2$/day, 10.58MJ/$m^2$/day and 9.78MJ/$m^2$/day for years 1998, 1999 and 2000 respectively, while the diffuse irradiance were 6.54 MJ/$m^2$/day, 5.33 MJ/$m^2$/day and 5.14 MJ/$m^2$/day for f998, 1999 and 2000 respectively. The direct irradiance values at the site were 11.63 MJ/$m^2$/day, 8.24MJ/$m^2$/day and 7.75 MJ/$m^2$/day for 1998, f999 and 2000 respectively. It was observed that each of the years has its own unique meteorological parameters that affect the quality and quantity of radiation received for each month. The annual average daily fractions of the diffuse to the global radiation (KD) were 0.51, 0.61 and 0.59 for years 1998, 1999 and 2000 respectively. Analysis indicated that the average daily KD ranged from 0.13 to a maximum value of 0.99 in May for irradiance measured at the broadband channel while the maximum and minimum KD value of 0.91 and 0.23 was recorded at wavelength band 870nm and 940nm in January and September respectively. The lowest average daily clearness index (Kt) value recorded was 0.03 in May (Spring) and the annual average daily clearness indexes are 0.45, 0.34 and 0.35 for years 1998, f999 and 2000 respectively. The frequency of clear days annually at Kwangju is 67.95%, 29.57% and 40.72% for years 1998, 1999 and 2000 respectively.

  • PDF

토양별(土壤別) 암모늄의 흡착(吸着)및 탈착(脫着)에 관한 연구 -II. 암모늄의 탈착(脫着) (Studies on Ammonium Adsorption by and Desorption from Various Soils -II. Desorption of Ammonium)

  • 심상칠;박훈;김무성;김광래
    • 한국토양비료학회지
    • /
    • 제11권2호
    • /
    • pp.75-80
    • /
    • 1979
  • 암모니움 탈착(脫着)을 16개(個) 토양에 대하여 $(NH_4)_2HPO_4$를 처리하여 0.01M $CaCl_2$로 7회(回) 연속침출(連續浸出)하여 검토하였다. 1. 탈착(脫着)은 2~4개의 속탈(速脫) 또는 완탈단계(緩脫段階)의 반복(反復)으로 진행(進行)된다. 2. 탈착단계(脫着段階)는 탈착량(脫着量)(y)과 침출회수(浸出回數)(x)간(間)에 log y=b-ax의 관계식(關係式)이 성립(成立)된다. 3. 탈착율(脫着率)(100${\times}$탈착량(脫着量)/흡착량(吸着量))은 15개(個) 토양평균이 65%였고 최고(最高)는 김천통(金泉統)의 87% 최소(最小)는 삼각통(三角統)의 32%였으며 이탄토(泥炭土)인 용호통(龍湖統)은 156%로 토양 ammonium 이 다량방출(多量放出)되었다. 4. 탈착률(脫着率)은 흡착량(吸着量)과 부(否)의 상관을 보이며 이 관계에서 토양은 세개의 계열(系列)로 분류(分類)되었다. 5. 탈착누적곡선(脫着累積曲線)은 최대치(最大値)에 접근(接近)하고 있으며 7회탈착(回脫着)으로 모든 토양이 최대치(最大値)에 접근(接近)하였다. 이때의 흡착량(吸着量)은 CEC의 502%(삼각통(三角統))에서 25%(김해통(金海統))의 범위(範圍)에 있었다. 6. 탈착량(脫着量) 또는 탈착률(脫着率)은 LAMA, (암모니움 Langmuir 최대흡착) CEC, 점토함량(粘土含量), 유효인산, 유기물함량등(有機物含量等)과 아무런 관계가 없었다. 7. 이상(以上)의 결과(結果)들은 ammonium의 흡착(吸着)과 탈착(脫着)에 있어 Fe, Al Si 등(等)의 관련성과 동반음(同伴陰) ion 흡탈착(吸脫着)이 관여함을 강하게 암시하는 것 같다.

  • PDF

연안자망 부이에 어구자동식별 장치 설치방안에 관한 기초적 연구 (A fundamental study on the installation methods of automatic identification buoy on coastal gill net)

  • 허남희;강경범;구명성;김근형;김종범;좌민석;김준택;정주명;김병엽;김석종
    • 수산해양기술연구
    • /
    • 제55권4호
    • /
    • pp.294-302
    • /
    • 2019
  • As a series of fundamental researches on the development of an automatic identification monitoring system for fishing gear. Firstly, the study on the installation method of automated identification buoy for the coastal improvement net fishing net with many loss problems on the west coast was carried out. Secondly, the study was conducted find out how to install an automatic identification buoy for coastal gill net which has the highest loss rate among the fisheries. GPS for fishing was used six times in the coastal waters around Seogwipo city in Jeju Island to determine the developmental status and underwater behavior to conduct a field survey. Next, a questionnaire was administered in parallel on the type of loss and the quantity and location of fishing gear to be developed and the water transmitter. In the field experiment, the data collection was possible from a minimum of 13 hours, ten minutes to a maximum of 20 hours and ten minutes using GPS, identifying the development status and underwater behavior of the coastal gillnet fishing gear. The result of the survey showed that the loss of coastal net fishing gear was in the following order: net (27.3%), full fishing gear (24.2%), buoys, and anchors (18.2%). The causes were active algae (50.0%), fish catches (33.3%) and natural disasters (12.5%). To solve this problem, the installation method is to attach one and two electronic buoys to top of each end of the fishing gear, and one underwater transmitter at both ends of the float line connected to the anchor. By identifying and managing abnormal conditions such as damage or loss of fishing gear due to external factors such as potent algae and cutting of fishing gear, loss of fishing gear can be reduced. If the lost fishing gear is found, it will be efficiently collected.

VCS 상관블록의 TCP/IP 출력데이터의 무결성 검사 소프트웨어의 개발과 성능개선에 관한 연구 (A Study on Performance Improvement and Development of Integrity Verification Software of TCP/IP output data of VCS Correlation Block)

  • 염재환;노덕규;오충식;정진승;정동규;오세진
    • 융합신호처리학회논문지
    • /
    • 제13권4호
    • /
    • pp.211-219
    • /
    • 2012
  • 본 논문에서는 VLBI상관서브시스템(VLBI Correlation Subsystem, VCS)의 상관블록 TCP/IP 출력데이터의 무결성 검사를 위한 소프트웨어의 개발과 상관출력 데이터의 손실을 방지하기 위한 성능개선 방법에 대해 기술한다. VCS의 상관결과는 TCP/IP 패킷 통신으로 데이터아카이브(Data Archive)에 저장된다. 본 논문에서는 데이터아카이브에 저장된 상관결과의 무결성을 확인하기 위해 VCS의 TCP/IP 패킷 정보를 이용한 무결성 검사 소프트웨어를 개발하였다. 개발한 소프트웨어를 이용하여 3단계의 무결성 검사 과정을 제안하고, 상관처리 실험을 통하여 제안방법의 유효성을 확인하였다. 또한 VCS와 데이터아카이브 사이에는 최소 적분시간 이내에 TCP/IP 패킷 통신이 완료되어야 하지만, 짧은 적분시간에 다량의 패킷과 대용량 데이터로 인해 패킷 손실이 발생할 뿐만 아니라 상관결과의 무결성 문제에도 영향을 미치는 것으로 확인되었다. 본 논문에서는 TCP/IP 패킷 손실의 원인을 분석하고 VCS의 FPGA(Field Programmable Gate Array) 설계에 대한 수정방법을 제시하여 상관결과의 무결성 문제를 해결하고자 한다.