• Nuclear Engineering and Technology
• /
• 제45권3호
• /
• pp.393-400
• /
• 2013

Concrete undergoing early frost damage in cold weather will experience significant loss of not only strength, but also of permeability and durability. Accordingly, concrete codes like ACI-306R prescribe a minimum compressive strength and duration of curing to prevent frost damage at an early age and secure the quality of concrete. Such minimum compressive strength and duration of curing are mostly defined based on the strength development of concrete. However, concrete subjected to frost damage at early age may not show a consistent relationship between its strength and durability. Especially, since durability of concrete is of utmost importance in nuclear power plant structures, this relationship should be imperatively clarified. Therefore, this study verifies the feasibility of the minimum compressive strength specified in the codes like ACI-306R by evaluating the strength development and the durability preventing the frost damage of early age concrete for nuclear power plant. The results indicate that the value of 5 MPa specified by the concrete standards like ACI-306R as the minimum compressive strength to prevent the early frost damage is reasonable in terms of the strength development, but seems to be inappropriate in the viewpoint of the resistance to chloride ion penetration and freeze-thaw. Consequently, it is recommended to propose a minimum compressive strength preventing early frost damage in terms of not only the strength development, but also in terms of the durability to secure the quality of concrete for nuclear power plants in cold climates.

• Industrial Engineering and Management Systems
• /
• 제10권3호
• /
• pp.221-231
• /
• 2011

One of the critical issues in wireless sensor network is the design of a proper routing protocol. One possible approach is utilizing a virtual infrastructure, which is a subset of sensors to connect all the sensors in the network. Among the many virtual infrastructures, the connected dominating set is widely used. Since a small connected dominating set can help to decrease the protocol overhead and energy consumption, it is preferable to find a small sized connected dominating set. Although many algorithms have been suggested to construct a minimum connected dominating set, there have been few exact approaches. In this paper, we suggest an improved optimal algorithm for the minimum connected dominating set problem, and extensive computational results showed that our algorithm outperformed the previous exact algorithms. Also, we suggest a new heuristic algorithm to find the connected dominating set and computational results show that our algorithm is capable of finding good quality solutions quite fast.

• 산업공학
• /
• 제16권spc호
• /
• pp.39-44
• /
• 2003

As one of many design variables, the role of dimension tolerances is to restrict the amount of size variation in a manufactured feature while ensuring functionality. In this study, a nonlinear integer model has been modeled to allocate the optimal tolerance to each individual feature at a minimum manufacturing cost. While a normal distribution determines statistically worst tolerances with its symmetrical property in many previous tolerance allocation studies, a asymmetrical distribution is more realistic because its mean is not always coincident with a process center. A nonlinear integer model is modeled to allocate the optimal tolerance to a feature based on a beta distribution at a minimum total cost. The total cost as a function of tolerances is defined by machining cost and quality loss. After the convexity of manufacturing cost is checked by the Hessian matrix, the model is solved by the Complex Method. Finally, a numerical example is presented demonstrating successful model implementation for a nonlinear design case.

• 한국주거학회논문집
• /
• 제20권3호
• /
• pp.47-58
• /
• 2009

Providing an adequate housing to the socially underprivileged with a weak economic base is the most difficult task of housing policies. Korea established minimum housing standards and has used them for housing policies. However, the level of Korean minimum housing standards is far lower than that of foreign minimum housing standards. Thus, this study made a comparative analysis of Korean minimum housing standards with foreign housing standards in various aspects in order to guarantee housing quality of the socially underprivileged in Korea. In particular, the floor area and ratio of small lease homes are minutely examined to present the actual housing standard of the socially underprivileged. The level of Korean minimum housing standards suggested in this paper is very close to that of Japanese minimum housing standard, which is 37.95 $m^2$ for a 3 member family and just above Chombard de Lauw's pathological limit (36.03 $m^2$). As this research is specifically focused on the establishment of minimum floor area standards for the socially underprivileged, further research should be made in consideration of more specific requirements of various groups for the socially underprivileged.

• 한국토양비료학회지
• /
• 제50권1호
• /
• pp.56-64
• /
• 2017

Soil quality has been regarded as an important factor for maintaining sustainability of ecosystem. Main purpose of this research was i) to select minimum factor for predicting biomass, and ii) to calculate soil quality index for biomass according to soil chemical properties. Result showed that soil pH, electrical conductivity (EC), soil organic matter (SOM), cation exchange capacity (CEC), and available phosphorus are minimum data set for calculating biomass production in soil. Selected representative soil chemical properties were evaluated for soil quality index and rated from 1 to 5 (1 is the best for biomass production). Percentage of each grade in terms of biomass production in national wide was 14.52, 35.23, 33.03, 6.47, 10.75% respectively. Although, only soil chemical properties were evaluated for calculating optimum soil quality, result of this research can be useful to understand basic protocol of soil quality assessment in national wide.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1729-1750
• /
• 2018

Voltage source inverters (VSIs) are widely used to drive induction motors in industry applications. The quality of output waveforms depends on the switching sequences used in pulse width modulation (PWM). In this work, all existing optimal space vector pulse width modulation (SVPWM) switching strategies are studied. The performance of existing SVPWM switching strategies is optimized to realize a tradeoff between quality of output waveforms and switching losses. This study generalizes the existing optimal switching sequences for total harmonic distortions (THDs) and switching losses for different modulation indexes and reference angles with a parameter called quality factor. This factor provides a common platform in which the THDs and switching losses of different SVPWM techniques can be compared. The optimal spatial distribution of each sequence is derived on the basis of the quality factor to minimize harmonic current distortions and switching losses in a sector; the result is the minimum ripple loss SVPWM (MRSLPWM). By employing the sequences from optimized switching maps, the proposed method can simultaneously reduce THDs and switching losses. Two hybrid SVPWM techniques are proposed to reduce line current distortions and switching losses in motor drives. The proposed hybrid SVPWM strategies are MRSLPWM 30 and MRSLPWM 90. With a low-cost PIC microcontroller (PIC18F452), the proposed hybrid SVPWM techniques and the quality of output waveforms are experimentally validated on a 2 kVA VSI based on a three-phase two-level insulated gate bipolar transistor.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1266-1276
• /
• 2021

The mask parameters of a coded aperture are critical design features when optimizing the performance of a gamma-ray camera. In this paper, experiments and Monte Carlo simulations were performed to derive the minimum detectable activity (MDA) when one seeks a real-time imaging capability. First, the impact of the thickness of the modified uniformly redundant array (MURA) mask on the image quality is quantified, and the imaging of point, line, and surface radiation sources is demonstrated using both cross-correlation (CC) and maximum likelihood expectation maximization (MLEM) methods. Second, the minimum detectable activity is also derived for real-time imaging by altering the factors used in the image quality assessment, consisting of the peak-to-noise ratio (PSNR), the normalized mean square error (NMSE), the spatial resolution (full width at half maximum; FWHM), and the structural similarity (SSIM), all evaluated as a function of energy and mask thickness. Sufficiently sharp images were reconstructed when the mask thickness was approximately 2 cm for a source energy between 30 keV and 1.5 MeV and the minimum detectable activity for real-time imaging was 23.7 MBq at 1 m distance for a 1 s collection time.

• 대한환경공학회지
• /
• 제39권4호
• /
• pp.208-213
• /
• 2017

본 연구에서는 국내 실정에 맞는 한국형 CWS 구축의 일환으로 국내 배 급수 시스템에서 오염 사고 발생가능성이 있는 무기 오염물질 네 종류(카드뮴, 크롬, 망간, 납)를 선정하고 batch 실험을 통해 각 오염물질의 수돗물에 주입 시 감지 가능한 "최소 반응 농도(minimum response concentration)"를 결정하고자 하였다. 무기 오염물질 네 종류에 대해 수질 인자들의 최소 반응 농도를 추적한 결과 카드뮴(수질기준 0.005 mg/L)에 대한 최소 반응 농도는 0.05~0.08 mg/L, 크롬(수질기준 0.05 mg/L)에 대한 최소 반응 농도는 0.03 mg/L, 망간(수질기준 0.05 mg/L)에 대한 최소 반응 농도는 0.005 mg/L, 그리고 납(수질기준 0.01 mg/L)에 대한 최소 반응 농도는 0.02~0.08 mg/L인 것으로 분석되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.979-982
• /
• 2002

Compressing image data by using Vector Quantization (VQ)［1］-［3］will compare Training Vectors with Codebook. The result is an index of position with minimum distortion. The implementing Random Codebook will reduce the image quality. This research presents the Splitting solution ［4］,［5］to implement the Codebook, which improves the image quality［6］by the average Training Vectors, then splits the average result to Codebook that has minimum distortion. The result from this presentation will give the better quality of the image than using Random Codebook.

• 한국식품조리과학회지
• /
• 제17권5호
• /
• pp.478-482
• /
• 2001

This experiment was carried out to clarify the effect of frying temperature and gelatinization method on the quality of popped rice for Salyeotgangjung. Frying at 220$^{\circ}C$ or 230$^{\circ}C$ gave a good expansion and score of sensory evaluation. But the frying oil began to smoke at 230$^{\circ}C$. There was no significant difference in the quality of popped rices between the treatments of minimum gelatinization after washing rice and moderate gelatinization after soaking for 80 minutes at 30$^{\circ}C$. In conclusion, frying washed rice with minimum gelatinization at 220$^{\circ}C$ would be considered as the best method for making Salyeotganagjung.