• International journal of advanced smart convergence
• /
• v.10 no.3
• /
• pp.1-9
• /
• 2021

In the Internet of Thing (IoT) framework, massive machine-type communications (MMTC) have required large spectral efficiency. For this, non-orthogonal multiple access (NOMA) has emerged as an efficient solution. Recently, a non-successive interference cancellation (SIC) NOMA scheme has been implemented without loss. This lossless NOMA without SIC is achieved via correlated superposition coding (SC), in contrast to conventional independent SC. However, conventional minimum high-correlated SC for only 2-user NOMA schemes was investigated in the lossless 2-user non-SIC NOMA implementation. Thus, this paper investigates a 3-user low-correlated SC scheme, especially for an inflated achievable sum rate, with a design of 3-user low-correlated SC. First, we design the 3-user low-correlated SC scheme by taking the minimum sum rate between 3-user SIC NOMA and 3-user non-SIC NOMA, both with correlated SC. Then, simulations demonstrate that the low correlation in the direction of the first user's power allocation inflates the sum rate in the same direction, compared to that of conventional minimum high-correlated SC NOMA, and such inflation due to low correlation is also observed similarly, in the direction of the second user's power allocation. Moreover, we also show that the two low correlations of the first and second users inflates doubly in the both directions of the first and second users' power allocations. As a result, the proposed 3-user low-correlated SC could be considered as a promising scheme, with the inflated sum rate in the future fifth-generation (5G) NOMA networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11A
• /
• pp.1072-1078
• /
• 2008

In this paper, we propose an efficient superposition coding multiplexing(SCM) method based on power allocation in descending order for fading broadcast channels in which per-user minimum and maximum rate constraints are considered in order to maximize the transmission effectiveness. It consists of three steps as follows. In the first step, a user group is selected to maximize the number of users with whom a transmitter can communicate instantaneously. In the second step, per-user power allocation for each user is done in descending order of transmit power by determining a maximum allowable interference power from all subsequent interfering users in order to guarantee its corresponding minimum rate, and then a residual power is calculated. The final step is performed if some power remains even after the second step. In this step, additional power allocation is performed up to the maximum transmit power to provide the maximum rate to the corresponding user, again in ascending order, starting from the last user in descending order. But, this method does not require power reallocation to subsequent users because tentative power allocation in the second step has been performed in descending order to guarantee the minimum rate for each user, taking into account the maximum allowable interference power from all the subsequent users. Therefore, the proposed method gets more efficient in term of computational complexity when per-user minimum as well as maximum rate constraints exist, especially as the number of users increases.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.137-139
• /
• 1991

This paper proposes a minimum power factor control for maximum efficiency operation of an induction motor, under low load condition. Minimum input or maximum efficiency operation is achived by properly adjusting the amplitude of the stator voltage, with the three phase AC voltage controller. Through the simulation, the relationships between the delay angle and input power under various load conditions are examined. Experimental results are also given, which show good coincidence with the simulation results.

• ETRI Journal
• /
• v.30 no.2
• /
• pp.341-343
• /
• 2008

This letter presents an angular minimum spanning tree (AMST) algorithm for topology control in multi-hop wireless ad hoc networks. The AMST algorithm builds up an MST for every angular sector of a given degree around each node to determine optimal transmission power for connecting to its neighbors. We demonstrate that AMST preserves both local and network-wide connectivity. It also improves robustness to link failure and mitigates transmission power waste.

• Korean Journal of Mathematics
• /
• v.26 no.2
• /
• pp.155-166
• /
• 2018

Consider FARIMA time series with innovations that have infinite variances. We are interested in the estimation of self-similarities $H_n$ of FARIMA(0, d, 0) by using modified R/S statistic. We can confirm that the $H_n$ converges to Hurst parameter $H=d+\frac{1}{2}$. Finally, we figure out ARMA and minimum variance power spectrum density of FARIMA processes.

• 전기의세계
• /
• v.28 no.12
• /
• pp.41-45
• /
• 1979

Improvement of power factor is achieved by reactive-current compensation, connecting power condenser to the circuit. This paper describes a method of reactive-current compensation, employing thyristor switching of capacitor banks without any breaker. This method reduces supply transients to the minimum by means of connecting condenser, because thyristor is triggered at zero point in condenser current. The reactive current detection and the experimental system to trigger thyristor at appropriate moment are given. IThe results show the fast reactive-current compensation on the condition of minimum transient.

• Journal of the Korean Vacuum Society
• /
• v.8 no.2
• /
• pp.102-110
• /
• 1999

The LIGA X-ray exposure step was modelled into three inequalities, by assuming that the X-ray energy attenuated within a resist is deposited only in the localized range of the resist. From these inequalities, equations for the minimum and maximum exposure times required for a good quality microstructure were obtained. Also, an equation for the thickness of an X-ray mask absorber was obtained from the exposure requirement of threshold dose deposition. The calculation method of the synchrotron radiation power from a synchrotron radiation source was introduced and applied to an X-ray exposure step. A power from a synchrotron radiation source was introduced and applied to an X-ray exposure step/ A power function of photon energy, approximating the attenuation length of the representative LIGA resist, PMMA, and the mean photon energy of the XZ-rays incident upon an X-ray mask absorber were applied to the above mentioned equations. Consequently, the tendencies of the minimum and maximum exposure and with respect to mean photon energy and thick ness of PMMA was obtained. Additionally, the tendencies of the necessary thickness of PMMA and photon energy of the X-ray mask absorber with respect to thickness of PMMA and photon energy of the X-rays incident upon an X-ray mask absorber were examined. The minimum exposure time increases monotonically with increasing mean photon energy for the same total power density and is not a function of the thickness of resist. The minimum exposure time increases with increasing mean photon energy for the same total power density in the case of the general LIGA process, where the thickness of PMMA is thinner than the attenuation length of PMMA. Additionally, the minimum exposure time increases monotonically with increasing thickness of PMMA. The maximally exposable thickness of resist is proportional to the attenuation length of the resist at the mean photon energy with its proportional constant of ln $(Dd_m/D_{dv})$. The necessary thickness of a gold X-ray mask absorber due to absorption edges of gold, increases smoothly with increasing PMMA thickness ratio, and is independent of the total power density itself. The simplicity of the derived equations has made clearly understandable the X-ray exposure phenomenon and the correlation among the exposure times, the attenuation coefficient and the thickness of an X-ray mask absorber, the attenuation coefficient and the thickness of the resist, and the synchrotron radiation power density.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.3
• /
• pp.19-25
• /
• 2012

About supply and demand to see that you need to match, the limitations of wind power capacity is low demand and the commitment of the general generator will exist between the minimum generation. if the turbine's output can be controlled, The limitation of wind power capacity will be adopted based on instant power generation. Namely, The minimum limits of wind power generation based load operation by calculating the amount that is higher than if the output should be restricted to highest operation. in this paper, we committed to the demand for low enough that the combination of the general generator of wind power capacity to accommodate the operation of determining whether the limit is intended to. For this, power system analysis program PSS/E was used, Jeju system by implementing the model simulations were performed.

• Journal of KIISE:Information Networking
• /
• v.32 no.2
• /
• pp.261-277
• /
• 2005

We propose the PAD (Power Aware Data-centric Routing Protocol), which finds minimum energy routes and prolongs network life-time, for the data-centric sensor networks. Firstly, the PAD discovers the minimum energy Property graph by removing redundant communication links. The proposed a1gorithm to find the minimum energy property graph is faster, simpler and easier to implement than existing aIgorithms. Secondly, the PAD runs the DDBF (Distributed Data-centric Bellman-Ford Algorithm) to determine routing paths between a base node and all sensor nodes. The DDBF selves the drawbacks of the distributed bellman-ford algorithm, i.e. slow convergence and a possible cyclic routing path. Since the PAD is a fully distributed algorithm with low overhead, it can be used in various kinds of resource limited sensor network applications.

• Journal of Power Electronics
• /
• v.4 no.1
• /
• pp.18-27
• /
• 2004

The output storage capacitor of the PFC converters is commonly designed for the selected hold-up time or the allowed output ripple voltage percentage. Nevertheless, this output capacitor is a main contribution factor to the PFC system stability. Moreover, seeking for a minimum output storage capacitor that assures the PFC desired operation under all condition, and providing the advantage of a small size and low cost is the main interesting target for engineering. Therefore, in this issue the design steps of the PFC converter have been discussed depending on three choices, output ripple, hold-up time, and stability. It is cleared that any design must take the minimum required storage capacitor for stability prospective as step-l in deign, then apply for any other specification like hold-up time or ripple percentage.