• Journal of Forest and Environmental Science
• /
• v.30 no.3
• /
• pp.277-284
• /
• 2014

Status of Arbuscular Mycorrhizal (AM) colonization in seven tree species (Albizia saman, Acacia auriculiformis A. Cunn. ex Benth., Albizia lebbeck, Chickrassia tabularis A. Juss., Eucalyptus camaldulensis Dehnn., Gmelina arborea (Roxb) DC, Swietenia macrophylla King.) collected from the hilly areas of Chittagong University (CU) was investigated. Roots and rhizosphere soil samples were collected in different seasons (pre-monsoon, monsoon and post monsoon). Percentage of AM colonization in root and number of spores/100 gm dry soil were assessed. The result of the investigation reveals that the intensity and percentage of AM colonization varied in different forest tree species in different seasons. In this study, maximum AM colonization and spore population were found in pre-monsoon and minimum were in monsoon season. The intensity of colonization was maximum in C. tabularis (74.43%) in pre-monsoon, A. lebbeck (69.45%) in monsoon and S. macrophylla (67.8%) in post monsoon seasons and minimum in A. auriculiformis (53.75%) during pre-monsoon, A. saman (24.4%) in monsoon and A. saman (19.36%) in post monsoon. The number of spores found per 100 g dry soil ranged between 164-376 during pre-monsoon, 27-310 during monsoon and 194-299 in post monsoon season. Out of six recognized genera of AM fungi, Glomus, Sclerocystis, Entrophospora, Scutellospora, Acaulospora and other unidentified spores were observed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.186-189
• /
• 2001

In keeping with the needs of the times for energy and labor saving and simplifying production processes, interests has been growing in warm forging. Moreover, it is interested in increasing the material usage and production amounts. To improve the productivity and material usage, it is studied the process design of warm forging for socket. Until now, socket is manufactured by hot forging in hammer. The percentage of material usage is under $60\%$ in hammer forging. On the other han4 the percentage can be increased over $90\%$ in warm forging. To change the process from hot forging to warm forging, process designs must be performed. In this time, by using the FEM package, DEFORM-3D, we could get the shape of 1st process and minimum sealing pressure. They are very essential design data to decrease the trial and error. Practically, the overlap defect could be detected and eliminated with design modification of rib height and fillet radius. Moreover, forging load and minimum sealing pressure was defined by the 3D FEM analysis.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.1
• /
• pp.80-85
• /
• 2008

This study was carried out to assess the antidermatophytic potential of the ethyl acetate(EtOAc) extract of the marine isolate of Aspergillus sp.. The fungus was isolated by serial dilution, and was identified Aspergillus sp.. The EtOAc extract of the fungus was examined to evaluate the antidermatophytic efficacy against the fungal pathogens infecting human skin using the disc diffusion and MIC(minimum inhibitory concentration) determination methods. The EtOAc extract($5{\mu}l\;disc^{-1}$) was considered to have the antidermatophytic activity based on the inhibition percentage of the mycelial growth of the fungi tested such as Trichophyton mentagrophytes KCTC 6085, Microsporum canis KCTC 6591, Microsporum canis KCTC 6348, Trichophyton rubrum KCTC 6352, Microsporum canis KCTC 6349 and Trichophyton mentagrophytes KCTC 6316. The percentage of the inhibition ranged from 54% to 81, and the MIC obtained was 62.5, 62.5, 250, 125, 125, and $125{\mu}g\;ml^{-1}$, respectively. The extract had a strong detrimental effect on the spore germination of the tested skin infectious pathogens. These findings strongly support the role of the ethyl acetate extract as a potential antidermatophytic agent.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.7
• /
• pp.976-980
• /
• 2018

The traction power system is configured to transmit electricity to the vehicles through mechanical contact between the OCL (Overhead Contact Line) and the pantograph. The system measures the current collection performance of the OCL, or the OCL installation condition is examined through maintenance for commercial operation. Maintenance continues to check the conditions through visual inspection by walking and inspection vehicles. The current collection performance is divided into the percentage of arcing(%), the contact force, and the uplift. The percentage of arcing is composed of a vision based system and used to verify the performance of a new OCL. However, it is not always possible to measure the current collection performance during commercial operation, and maintenance based on human resources can not be replaced. This paper presents the minimum performance condition of video devices in the current collection system of commercial vehicles. In addition, a continuous arcing was measured, and current collection performance was examined on the traction power system at the 250 km/h. It was analyzed with a minimum duration of arc of 1 ms. The frame rate is then shown by comparing the number of frames in the image at the time intervals of the number of the arcing. It is expected that the result of this study can be used for examining the minimum performance of video devices depending on their purpose.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.772-776
• /
• 2004

This paper proposes an interference avoidance approach for Constraint-Based Routing (CBR) algorithm in the Multi-Protocol Label Switching (MPLS) network. The MPLS network itself has a capability of integrating among any layer-3 protocols and any layer-2 protocols of the OSI model. It is based on the label switching technology, which is fast and flexible switching technique using pre-defined Label Switching Paths (LSPs). The MPLS network is a solution for the Traffic Engineering(TE), Quality of Service (QoS), Virtual Private Network (VPN), and Constraint-Based Routing (CBR) issues. According to the MPLS CBR, routing performance requirements are capability for on-line routing, high network throughput, high network utilization, high network scalability, fast rerouting performance, low percentage of call-setup request blocking, and low calculation complexity. There are many previously proposed algorithms such as minimum hop (MH) algorithm, widest shortest path (WSP) algorithm, and minimum interference routing algorithm (MIRA). The MIRA algorithm is currently seemed to be the best solution for the MPLS routing problem in case of selecting a path with minimum interference level. It achieves lower call-setup request blocking, lower interference level, higher network utilization and higher network throughput. However, it suffers from routing calculation complexity which makes it difficult to real task implementation. In this paper, there are three objectives for routing algorithm design, which are minimizing interference levels with other source-destination node pairs, minimizing resource usage by selecting a minimum hop path first, and reducing calculation complexity. The proposed CBR algorithm is based on power factor calculation of total amount of possible path per link and the residual bandwidth in the network. A path with high power factor should be considered as minimum interference path and should be selected for path setup. With the proposed algorithm, all of the three objectives are attained and the approach of selection of a high power factor path could minimize interference level among all source-destination node pairs. The approach of selection of a shortest path from many equal power factor paths approach could minimize the usage of network resource. Then the network has higher resource reservation for future call-setup request. Moreover, the calculation of possible path per link (or interference level indicator) is run only whenever the network topology has been changed. Hence, this approach could reduce routing calculation complexity. The simulation results show that the proposed algorithm has good performance over high network utilization, low call-setup blocking percentage and low routing computation complexity.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.22 no.3
• /
• pp.27-34
• /
• 2016

Purpose: The purpose of this paper is to develop a predictive model for patient visibility in Korean ICUs (corridor or continental type). Methods: The measures of static visibility were used to quantify the patient visibility (upper third part of the patient bed) from the nurse station. The measure of space programme and area distribution (patient zone percentage, staff zone percentage and departmental gross square meter per patient bed) were calculated by using AutoCAD and MS Excel programs. Regression analysis was conducted for visibility as dependant variable with independent variables of patient area percentage, staff area percentage as well as departmental gross square meter per bed by using IBM SPSS. Results: (1) Average patient visibility and percentage of patient area in ICU shows a strong negative correlation ($r^2$=0.66), p=0.01. (2) Patient visibility in Korean ICU (corridor or continental type) can be calculated as below with the given conditions: Y= $-1.449(X)+124.3{\pm}6$, Y is the total visibility of the ICU (corridor or continental type) and X is the percentage of patient area in the unit. Conditions:1. Given that the unit has a mixed programme of open bed and closed patient rooms and 2. The unit have a minimum of 20% patient rooms. Implications: This study may contribute to the visibility analysis of existing and future ICU design (corridor or continental type) in Korea to achieve maximum patient visibility and reduced patient mortality.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2007

At present, multivoltine silkworm races reared five times per year involving huge manpower and rearing expenditure. Egg diapausing behavior is facultative in multivoltine and egg diapause was induced in selected multivoltine races by regulating temperature at $18^{\circ}C$, relative humidity 80% and photoperiod (6L:18D) in the late stage silkworm rearing. The maximum percentage of egg diapause induction was recorded in Rong Diazo, Diazo and MW13 showed 94%, 93% and 92% respectively, whereas the races A14DY and OS-616 showed minimum diapause induction 15% and 18% respectively. The diapause induced multivoltine eggs were preserved up to six months by cold preservation schedule normally adopted for bivoltine. After three and six months egg preservation, the diapause induced layings were released and observed for hatching percentage, all races showed above 82 % of hatching except the race AP12, which showed only 78 % of hatching. This methods reduce the crop cycle, gives strong safety backup and preventing the genetic erosion. This study helps formulating a new conservation method for multivoltine silkworm germplasm.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1E
• /
• pp.29-33
• /
• 1996

A categorization for cluster is necessary when an unsupervised classfication is used for remote sensing image classification. It is desirable that this method is performed automatically, because manual categorization is a highly time consuming process. In this paper, several automatic determination methods were proposed and evaluated. They are four methods. a) maximum number method : which assigns the tharget cluster to the category which occupies the largest area of that cluster b) maximum percentage method : which assigns the target cluster to the category which shows the maximum percentage within the category in that cluster. c) minmun distance method : which assigns the target cluster to the category having minmum distance with that cluster d) element ratio matching method : which assigns local regions to the category having the most similar element ratio of that region From the results of the experiments, it was certified that the result of minimum distance method was almost the same as the result made by a human operator.

• Journal of Families and Better Life
• /
• v.14 no.2
• /
• pp.277-288
• /
• 1996

Food away from home consumption pattern difference among 20 different social strata has been observed in order to make judgement how much food away from home expenditure should be included in the 2 tiered poverty line. It was found that it was reasonable to include food away from home expenditure in the minimum living cost. And as social class rose expenditure amount and percentage of consumption compared to total food expenditure increased and income elasticity and margial propensity decreased. Percentage of consumption compared to total expenditure increased up to middle class however from 14/20 and up strata decreased as social strata rose. For 4 members city wage earner family suggested monthly poverty line is 16, 977 and suggested monthly relative poverty line is 60, 651.

• The Journal of Economics, Marketing and Management
• /
• v.11 no.3
• /
• pp.25-35
• /
• 2023

Purpose: This paper examines whether foreign aid influences public sector efficiency in policy areas of administration, education, and stability. Research design, data and methodology: The study uses panel data of 77 aid recipient developing countries over the period 2000-2020 and employs various panel data techniques to estimate. Results: We found that a percentage change in foreign aid increases administrative efficiency by 0.02 to 0.04 on average ceteris paribus in the short run. On the other hand, a percentage increase in foreign aid decreases education efficiency by 0.005 to 0.006 on average. While the impact of foreign aid on the policy area of stability is insignificant. Conclusions: The empirical results of this study have important implications for both donors and aid recipient countries. It suggests that to get positive influence from foreign aid, in the area of education and stability, the recipient countries need to increase accessibility of secondary schools with quality education especially; technical and vocational. Also, the donor should provide a minimum threshold amount of foreign aid to developing countries for reforming the institutions' capacity building.