• 한국산학기술학회논문지
• /
• 제19권11호
• /
• pp.594-603
• /
• 2018

최근 계측 기술의 발달에 따라 종래의 복잡하고 시간 소모적인 현장 계측분석 작업을 단순하고 편리하게 만드는 작업이 가능해지고 있다. 이런 배경에서 이 논문에서는 최소화된 계측 및 신호처리를 통해 상시진동 케이블의 장력을 추정하는 문제에 대해 연구하였다. 최소화 계측 방법으로는 저가 영상장비로 촬영된 동영상만을 이용하는 영상 변위 계측을 구상하였다. 또한 이로 인한 유효 주파수 대역 부족 문제의 해결을 위해 미러 주파수를 이용한 고유진동수 추정 방법을 제시하였다. 더불어 현장 사용 성능과 관련한 상시진동 문제를 처리하기 위해 신호처리 및 고유진동수 추정법으로 FDD 방법이 채택되었다. 제안된 최소화 계측 시스템과 미러 주파수 개념의 특성 및 FDD 방법의 적용성을 보기 위하여 사장교 모형을 이용한 실험적 연구가 수행되었다. 실험 결과는 상시진동을 위한 FDD 방법이 최소화 시스템을 이용한 고유 진동수 판별에서도 효과적으로 잘 작동됨을 보여 주었다. 또한 미러 주파수 개념은 저속촬영에 따라 왜곡된 신호에서도 고주파수 영역에 있는 고유진동수 추정이 가능함을 보여 최소화 시스템의 한계돌파에 효과적임을 보여 주었다. 결론적으로 실험결과는 제안된 최소화 계측 및 신호처리 시스템이 상시진동 케이블 장력 추정에 효과적인 방법이 될 수 있음을 보여주었다.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2006년도 춘계학술대회
• /
• pp.311-315
• /
• 2006

Viterbi decoder는 크게 BM(Branch metric), ACS(Add-Compare-Select), SM(Survivor Memory) block 으로 구성되어 있다. 이중 ACSU 부분은 고속 데이터 처리를 위한 bottleneck이 되어 왔으며, 이의 해결을 위한 많은 연구가 활발히 진행되어 왔다. look ahead technique은 ACSU를 M-step으로 처리하고 CS(Carry save) number를 사용한 새로운 비교 알고리즘을 제안하여 high throughput을 추구했으며, minimized method는 block processing 방식으로 forward, backward 방향으로 decoding을 수행하여 ACSU 부분의 feedback을 완전히 제거하여 exteremely high throughput 을 추구하고 있다. 이에 대해 look ahead technique 의 기본 PE(Processing Element)를 바탕으로 minimized method 알고 리즘의 core block 을 bit-level 로 구현하였으며 : code converter 를 이용하여 CS number 가운데 redundat number(l)를 제거하여 비교기를 더 간단히 하였다. SYNOPSYS의 Design compiler 와 TSMC 0.18 um library 를 이용하여 합성하였다.

• 대한임베디드공학회논문지
• /
• 제9권2호
• /
• pp.75-80
• /
• 2014

Energy consumption of sensor nodes is minimized because it has limited energy generator in wireless sensor network. Electronic shelf label system is one of application fields using wireless sensor networks. Battery size of small apparatus for displaying price is restricted. Therefore its current consumption have to be minimized. Furthermore the method for minimization of peak current would be considered because life cycle of coin battery used to display or RF is vulnerable to intensity of drain current. In this paper, we analyze current consumption pattern of low-power electronic shelf label system. Then we propose the method for minimization of current consumption by modification of software and hardware. Current consumption of the system using proposed method are approximately 15 to 20 percent lower than existing system and the life cycle of the system is approximately 10 percent higher than existing system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.431-434
• /
• 1999

This paper presents design of controllers for battery energy storage system. The proposed battery energy storage system can be controlled to operate in the power conditioning mode or the inverter mode. The operation of this mode further divided into three cases: (a) in the peak load period, the load power supplied from the utility is minimized as far as possible; (b) in the off-peak load period, the utility supplies power to the load and charges the battery bank with automatic charging control; (c) in the medium load period, to save battery energy the real power flow out of the battery energy storage system is minimized. Besides, in all cases, the proposed battery energy storage system also automatically compensates the harmonics, subharmonics and reactive power factor in the utility side are much improved. Simulation results are presented by the effectiveness of the proposed controllers for battery energy storge system.

• 한국결정성장학회지
• /
• 제22권5호
• /
• pp.213-217
• /
• 2012

Carbon coils could be synthesized on nickel catalyst layer-deposited silicon oxide substrate using $C_2H_2$ and $H_2$ as source gases under thermal chemical vapor deposition system. By the incorporation of $SF_6$ additive in cyclic modulation manner, the dominant formation of the nanosized carbon coils could be achieved with maintaining the minimized sulfur additive amount. The geometry variation of the as-grown carbon coils, such as linear type, microsized coil type, wavelike nanosized coil type, and nanosized coil type, were investigated according to the different cyclic modulation manner of $SF_6$ flow. $SF_6$ gas incorporation develops the coil-type geometry. Furthermore, the higher flow rate of $SF_6$ gas increased the amount of the nanosized carbon coils. The slightly increased etching ability by $SF_6$ addition seems to be the cause for these results.

• 시스템엔지니어링학술지
• /
• 제14권1호
• /
• pp.72-82
• /
• 2018

Generally speaking, because of complexity of engineering process, the systems engineering may be not easy to understand clearly and not easy to perform also. The status of systems engineering infrastructure of the some Korean industry is not matured yet, i.e., the systems engineering process, method, tool and environment is not implemented consistently within the steel making industry. These difficulties are more severe at the concept and basic design phase than the detail design phase relatively. Korean industry has lots of development project for the precedented systems and usually has matured domain knowledge for the precedented systems. Even though there is a mature domain knowledge of the precedented systems, the development project will lead to failure under the condition of engineering system is not well equipped. For the project success, it is very important to have a proper engineering execution system especially for the concept design and basic phase, which has a high abstraction and a large influence on the whole project. This paper proposes a minimized design process that can be easily applied to the concept and basic design phase of the precedented systems, instead of complex system engineering processes. This paper also proposes the application case of the minimized design process and methods for a Blast Furnace System.

• KIEE International Transactions on Power Engineering
• /
• 제12A권1호
• /
• pp.31-35
• /
• 2002

This paper presents a new operation scheme of UPFC to minimize both generation costs and active power losses in a normal operation state of power system. In a normal operation, cost minimization is a matter of primary concern among operating objectives. This paper considers two kinds of costs, generation costs and transmission losses. The total generation cost of active powers can be minimized by optimal power flow, and active power losses in the transmission system can be also minimized by power flow control of UPFC incorporated with minimization of generation costs. In order to determine amounts of active power reference of each UPFC required for the cost minimization, an iterative optimization algorithm based on the power flow calculation using the decoupled UPFC model is proposed. For verification of the proposed method, intensive studies have been performed on a 3-unit 6-bus system equipped with a UPFC.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1433-1439
• /
• 2009

Best value is the ultimate goal of the owner and can thus have diverse meanings according to the project characteristic, owner's purpose, user groups' payment capability, etc.. Recently, resettlement problems of the marginalized members in the urban regeneration area have been issued in Korea because they have no capability to purchase (or lease) redeveloped housing (or apartment). It means that a minimized production cost for reducing supply price of housing is a key factor in establishing the best value of the marginalized members. The lowest-price bidding system serves the purpose of ensuring a minimized production cost, but due to the low-cost investments, it creates various problems, such as sloppy construction, lowered quality, an increased LCC, and worsening profitability for builders. Thus, to help them resettle, it is necessary to supply affordable housing geared towards a certain appropriate quality and minimum construction costs. Towards this end, this study aimed to propose a cost reduction bidding system based on a technical proposal. The proposed technical-proposal-based cost reduction bidding system consists of the following components: work-unit-based, project-unit-based, and construction-period-reducing technical proposals. These components are evaluated to select the best bidder for a given project. The technical proposal based cost reduction bidding system proposed herein is expected to provide facilities with appropriate supply prices and appropriate quality levels, to bolster the technological competitiveness of builders.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.9-12
• /
• 2001

An active control of the vibration transmitted by longitudinal load in flight control system is investigated numerically. The flight control system is modeled as a finite, thin shell cylinder with constant thickness. A vibration source is generated by exterior monopole source. Distributed piezoelectric actuator is used to control of the vibration. Thin shell theory is used to formulate the numerical models. The amplitude of vibration at discrete location and power transmission are minimized by analytical optimization method. Genetic algorithm is used as numerical optimization method to search optimal actuator position and size which amplitude of vibration is minimized.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.1950-1959
• /
• 2001

An active control of the vibration transmitted by longitudinal load in flight control system is investigated numerically. The flight control system is modeled as a finite, thin shell cylinder with constant thickness. A vibration source is generated by exterior monopole source. Distributed piezoelectric actuator is used to control of the vibration. Thin shell theory is used to formulate the numerical models. The amplitude of vibration at discrete location and power transmission are minimized by analytical optimization method. Genetic algorithm is used as numerical optimization method to search optimal actuator position and size which amplitude of vibration is minimized.