• 한국산업정보학회논문지
• /
• 제12권4호
• /
• pp.119-125
• /
• 2007

본 논문에서는 블루투스용 초소형 PCB 일체형 안테나를 제안하였다. 제안된 안테나는 인쇄형 역 F 안테나의 공진부 선로를 미앤더 형태로 변형함으로써 크기를 소형화한 구조이다. 안테나의 치수는 널리 사용되는 상용 소프트웨어인 MWSTM를 사용하여 최적화하였다. VSWR 3.5 기준으로 $2.38GHz{\sim}2.45GHz$ 범위의 주파수를 만족시켜 3%의 대역폭을 만족하고 중심주파수에서 최대 VSWR 2.4의 값을 가지며 -0.23dBi의 이득 특성을 보였다. 제안된 안테나의 크기는 $9.65mm{\times}5.95mm$로서 기존의 인쇄형 역 F안테나와 비교 할 때 55%의 면적으로 소형화된 것이다.

• 한국전자파학회논문지
• /
• 제18권6호
• /
• pp.674-679
• /
• 2007

본 논문에서는 이중 모드 마이크로스트립 링 공진기의 크기를 줄이기 위해 4개의 개방 스터브를 삽입하였고, 이를 이용해 중심 주파수 2 GHz에서 100 MHz의 대역폭을 갖는 대역 통과 필터를 설계하였다. 삽입된 개방 스터브의 캐패시턴스 값에 따라 링 공진기의 크기를 조절할 수 있고, 스터브들의 두 가지 조합 형태 각각의 경우에 대역 통과 필터를 설계할 수 있음을 보였다. 제안된 구조를 2단 대역 통과 필터 회로로 모델링하여 위의 두 가지 경우에 각각 필터를 설계 및 제작하였으며, 설계 결과와 측정 결과가 잘 일치함을 확인하였다.

• 한국지반환경공학회 논문집
• /
• 제11권12호
• /
• pp.37-45
• /
• 2010

초미립자시멘트는 입자 크기가 마이크로화되어 실트성 지반까지 주입가능하지만 점성이 높아 침투성이 저하되는 단점이 있다. 본 연구에서는 유동화제를 사용하여 점성을 낮춘 초미립자주입재의 그라우팅 효과를 평가하고자 암반에서 초미립자주입재와 보통시멘트주입재의 주입효과를 비교하였다. 시추조사, 현장수압시험, 공내재하시험, 공내전단시험, 단위주입량분석, p~q~t chart 유형 분석을 실시하였다. 시험 결과 초미립자주입재를 사용하는 경우가 보통시멘트 주입재를 사용하는 경우보다 투수성, 탄성계수 및 변형계수, 단위주입량 및 주입재 회수율 등 측면에서는 유리하지만 전단응력 측면에서는 차이가 거의 없는 것으로 나타났다.

• ETRI Journal
• /
• 제35권1호
• /
• pp.150-153
• /
• 2013

In this letter, a compact and fully printed composite right- and left-handed (CRLH) dual-band power divider is proposed. The branches of the conventional Wilkinson power divider are replaced by subwavelength CRLH phase-shift lines having $+90^{\circ}$ for one frequency and $-90^{\circ}$ for another frequency for dual-band and miniaturization performance. Equations are derived for the even- and odd-mode analysis combined with the dual-band CRLH circuit. A PCS and a WLAN band are chosen as the test case and the circuit approach agrees with the CAD simulation and the measurement. Additionally, the CRLH property is shown with the dispersion diagram and the eightfold size reduction is noted.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.793-796
• /
• 2005

In this paper, we propose a method which can improve uniformity of a miniaturized electron beam array for inspection of very small pattern with high speed using vertical interconnection. This method enables the individual control of columns so that it can reduce the deviation of beam current, beam size, scan range and so on. The test device that used vertical interconnection method was fabricated by multiple wafer bonding and metal reflow. Two silicon and one glass wafers were bonded and metal interconnection by melting of electroplated AuSn was performed. The contact resistance was under $10{\Omega}$.

• ETRI Journal
• /
• 제37권1호
• /
• pp.21-25
• /
• 2015

A miniaturized triple-band antenna suitable for wireless USB dongle applications is proposed and investigated in this paper. The presented antenna, simply consisting of a circular-arc-shaped stub, an L-shaped stub, a microstrip feed line, and a rectangular ground plane has a compact size of $16mm{\times}38.5mm$ and is capable of generating three separate resonant modes with very good impedance matching. The measurement results show that the antenna has several impedance bandwidths for S11 ${\leq}$ -10 dB of 260 MHz (2.24 GHz to 2.5 GHz), 320 MHz (3.4 GHz to 3.72 GHz), and 990 MHz (5.1 GHz to 6.09 GHz), which can be applied to both 2.4/5.2/5.8 GHz WLAN bands and 3.5/5.5 GHz WiMAX bands. Moreover, nearly-omni-directional radiation patterns and stable gain across the operating bands can be obtained.

• 조명전기설비학회논문지
• /
• 제15권6호
• /
• pp.27-34
• /
• 2001

There are several electricity applied sterilizers such as using high frequency, ozone, high voltage, and so on. Those sterilizers feature "because of no chemical process and no secondly environmental pollution". At the power conversion part, ZVS and ZCS methods have been used that it results in reduced switching loss, miniaturized size, and lightened weight. Besides, the current in the propose device is smaller than that of existing method. Thus, it is expected that the cost of sterilization process, when quality of the device is measured by power consumption, will be reduce. Therefore, the purpose of this research is to solve the sterilization problems of existing powder with high voltage and field to and more economical and effective way, and to suggest mere improved sterilizer.

• 한국항해항만학회지
• /
• 제34권7호
• /
• pp.543-552
• /
• 2010

Modified compact combline bandpass filters are proposed based on the miniaturized quarter-wave transmission line which is composed of the parallel coupled line and lumped capacitors. The electrical length of the parallel coupled line in a resonator, which determines the size of combline bandpass filters, is just $5^{\circ}$ or $7^{\circ}$, resulting in a compact circuit area. The designed combline bandpass filter also has a wide upper stopband by suppressing the spurious passbands, not moving. Measured results of two fabricated filters centered at 400MHz show good agreement with the theoretical predications.

• 한국소음진동공학회논문집
• /
• 제15권6호
• /
• pp.660-666
• /
• 2005

Recently, the need for subminiature storage systems has increased with the diversification of portable devices. An actuator for small optical disk drives has to satisfy performance requirements such as higher access speed, lower power consumption, and smaller size. In this paper, we proposed the miniaturized rotary type VCM actuator that had an effective focusing mechanism and secured sufficient bandwidth for small form factor (SFF) optical disk drive (ODD). Initial model was designed by electromagnetic (EM) and structural analyses. Such a model was improved using design of experiments (DOE) procedure based on a Blu-ray disk (BD) 1x specifications.

• 한국IT서비스학회지
• /
• 제12권3호
• /
• pp.323-330
• /
• 2013

In this paper, miniaturized patch antenna operating at ISM band has been designed by applying the fractal technique. Various type of antenna structure, microstrip patch antenna and koch curve microstrip patch antenna has been proposed and simulated using Ansoft HFSS (High Frequency Structure Simulator). The area of microstrip patch antenna and koch microstrip patch antenna is 1,058 $mm^2$, and 891 $mm^2$ respectively, showing the size reduction ratio of 16%. The finally made koch curve microstrip patch antenna resonates at 2.45GHz with return loss of 22.69dB, VSWR of 1.2142, and antenna radiation gain of 3.26dBi.