• 한국세라믹학회지
• /
• 제36권1호
• /
• pp.82-88
• /
• 1999

본 연구에서는 fine ceramics의 합성법을 traditional ceramics 합성에 적용하여 합성한 내화재료용 mullite에 광화제를 첨가함으로서 광화제가 mullite 생성에 미치는 영향을 관찰하고자 한다. 출발물질로 하동 kaolin과 boehmite를 사용하였으며, 여기에 광화제로 MnO와 TiO2를 액상으로 첨가하였다. 그 결과 3.5 wt% MnO를 첨가한 경우, 1,25$0^{\circ}C$에서 미반응 silica와 alumina가 존재하지 않는 단일상의 mullite를 합성할 수 있었으며, TiO2 첨가시 2~3.5wt% MnO의 경우 mullite 생성 온도를 약 10$0^{\circ}C$ 낮출 수 있었다. 이때의 mullite 생성율은 1$650^{\circ}C$에서 84%이며, 부피 비중과 흡수율 및 상온에서 꺾임강도는 각각 2.72, 0.27%, 180MPa을 나타내어 광화제를 첨가하지 않은 경우보다 특성도 향상함을 알 수 있었다.

• 한국세라믹학회지
• /
• 제45권5호
• /
• pp.256-262
• /
• 2008

$ZnAl_{1-x}\;Cr_xO_4$ solid solutions were synthesized as pink pigments with and without mineralizer. The pigments were examined to optimize color development conditions of temperature and $Cr_2O_3$ contents. The characteristics of synthesized pigments were analyzed by XRD, XPS, FT-IR and UV-vis spectrophotometer. While samples without mineralizer fired at $1300^{\circ}C$, showed $ZnAl_2O_4$ and $ZnCr_2O_4$ spinel in XRD analysis. While samples with mineralizer resulted in $ZnAl_2O_4$. As a results, the pigments show pink color and most effective pink color was obtained at X=0.15 and $1250^{\circ}C$ when mineralizer was used. The chromatic coordinates are $L^*$ 58.61 $a^*$ 24.48, and $b^*$ 9.60.

• 한국세라믹학회지
• /
• 제42권11호
• /
• pp.743-748
• /
• 2005

The effect of reaction parameters in the characteristic of $Pb(Zr_{0.52} Ti_{0.48})O_3$ powders by hydrothermal process was investigated in this study. In the preparation of PZT, the types of starting material and concentration of mineralizer on phase fraction and morphology was investigated respectively. Regardless the types of Pb precursor, PZT was able to synthesize ranging from 7 to 20 on KOH concentration and from 13.01 to 13.55 on pH of solution. The particle size of the PZT powders can be controlled by the mineralizer concentration and various types of precursor.

• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.739-744
• /
• 2000

YAG(Y3Al5O12) as host material of YAG:Tb3+ was studied via hydrothermal synthesis of metal hydroxides. We changed the kind of mineralizer, the concentrations and process conditions in hydrothermal synthesis. As a result, we found, acicular YAG powders were obtained by the use of KOH as a mineralizer, the concentration of KOH affected the shape and size of YAG powder. Fine grained YAG were perpared by the use of NH4OH as a mineralizer and the concentration of NH4OH affected crystal phases but did not affect particle size. We could finally get the spherical looking YAG powder at 8 M NH4OH and at 35$0^{\circ}C$ for 12h. The average particle size was about 0.2${\mu}{\textrm}{m}$.

• 한국세라믹학회지
• /
• 제42권7호
• /
• pp.516-520
• /
• 2005

Conditions for formation of perovskite Pb(Zr$_{0.52}$Ti$_{0.48}$)O$_{3}$ phase by the hydrothermal synthesis are investigated. Pb(Zr$_{0.52}$ Ti$_{0.48}$)O$_{3}$ ceramics were synthesized by hydrothermal process above 180$^{\circ}C$ for 2 h reaction using 5$\~$30 M KOH solution as a mineralizer. Particle size increases in proportion to the mineralizer concentration. As a result of EOX analysis, PZT powders synthesized using 50 M of KOH as a mineralizer were considered as 2.42 mol$\%$ K doped-PZT powders. And 2.42 mol$\%$ K doped-PZT has much higher mechanical quality factor than undoped PZT ceramics. The sintering properties showed 7.987 g/cm$^{3}$ of sintered density and 3$\~$4 $\mu$m of grain size.

• 시멘트 심포지엄
• /
• 25호
• /
• pp.41-47
• /
• 1997

• 한국세라믹학회지
• /
• 제46권4호
• /
• pp.372-378
• /
• 2009

The coloring agents $Cr_2O_3$ and $CrCl_3$ were manipulated in this study to synthesize ZnO-$Al_2O_3-Cr_2O_3$ system pigments by changing their mixing ratio. The addition of varying amounts of mineralizer was also tested to obtain better color development of the pink pigment. In the synthesis of ZnO- $Al(OH)_3-Cr_2O_3-CrCl_3$ pigments, the best composition is $Cr_2O_3$-0.1 mole and $CrCl_3$-0.2 mole when $Cr_2O_3$ is partially substituted with $CrCl_3$ to synthesize them. Among the $ZnAl_{1.6-x}Cr_{0.2+x}O_4$ compositions to which a mineralizer was not added, ZnO-1mole, $Al(OH)_3$-1.7 mole, $Cr_2O_3$-0.075 mole, and $CrCl_3$-0.15 mole showed a desirable pink hue. The measurements of pigments $L^*$, $a^*$ and $b^*$, were $L^*$ 81.81, $a^*$ 16.65 and $b^*$ 0.45, and when the synthesized pigments were applied to a zinc glaze, the measurements were $L^*$ 60.41, $a^*$ 28.39, and $b^*$ 16.97. When adding a mineralizer, a 2 wt% addition resulted in the most favorable pink color. The composition for the most favorable result that included a mineralizer was $Al(OH)_3$-1.8 mole, $Cr_2O_3$-0.05 mole, and $CrCl_3$-0.1 mole, and the calcination temperature was $1250^{\circ}C$. The pigment color analysis showed $L^*$ 82.52, $a^*$17.14 and $b^*$-1.18, and the measurements of $L^*$, $a^*$ and $b^*$ in the glaze were $L^*$ 60.97, $a^*$ 28.77 and $b^*$ 13.72.

• 한국결정성장학회지
• /
• 제6권2호
• /
• pp.254-262
• /
• 1996

수열합성법을 이용하여 $1~3\;\mu\textrm{m}$의 입자 크기를 갖는 균일한 $Pb(Zr_{0.52}Ti_{0.48})O_{3}$ (PZT)분말을 제조하였다. 출발물질의 종류에 따라 반응조건이 다소 차이를 보였지만, 일반적으로 10 M의 KOH를 광화제로 사용하여, $180^{\circ}C$ 이상에서 2시간 동안 반응시켜 PZT 분말을 합성 할 수 있었다. 또한, 광화제의 농도, 수열반응 온도, 그리고 반응시간이 증가할수록 균일상의 분말이 형성됨을 보였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2002년도 춘계 학술발표강연 및 논문개요집
• /
• pp.96-96
• /
• 2002

• 한국결정성장학회지
• /
• 제7권1호
• /
• pp.47-58
• /
• 1997

본 연구에서는 수열성장법을 이용해서 알루미늄 수화물인 깁사이트로부터 코런덤($\alpha$-$Al_2O_3$) 단결정 분말을 제조하였으며, 주요 반응인자로서 광화제와 성장기질의 특성이 생성물의 입도분포와 결정성에 미치는 영향을 조사했다. 실험결과 성장용액의 용해도를 증가시키기 위해 광화제로 사용된 KOH의 첨가량이 증가할수록 코런덤 입자의 크기가 커졌고, 수열반응 온도는 낮아졌으나, 영양제인 깁사이트의 농도가 증가할수록 합성된 코런덤 입자는 작아졌다. 성장기질의 물성특성 차이에 따라 수열합성 조건이 달라졌다. 수열합성을 통해 400~$470^{\circ}C$인 반응온도 범위에서 1~10 $\mu \t extrm{m}$ 정도의 중량평균 입경을 갖는 육방정의 코런덤 결정을 합성하였다.