• Resources Recycling
• /
• v.24 no.6
• /
• pp.31-37
• /
• 2015

Ground granulated blast-furnace slag (GGBFS) which is by-product of steel industry has been recycled as a cement admixture though the other steel slags are used as aggregates. In this study, the electric arc furnace slag (EAFS) was used as a cement admixture after the reduction of iron oxide in the slag at the interface of molten slag and water quenching. Consequently, the reformed EAFS (REAFS) had higher grindability than that of granulated blast furnace slag. And in mortar tests, the strength properties of specimens using REAFS were 98% of plain specimens of GGBFS upto 20% replacement ratio of GGBFS with REAFS.

• Mineral and Industry
• /
• v.26
• /
• pp.1-12
• /
• 2013

In this study, an accelerated carbonation process was applied to stabilize hazardous heavy metals of industrial solid waste incineration (ISWI) bottom ash and fly ash, and to reduce $CO_2$ emissions. The most commonly used method to stabilize heavy metals is accelerated carbonation using a high water-to-solid ratio including oxidation and carbonation reactions as well as neutralization of the pH, dissolution, and precipitation and sorption. This process has been recognized as having a significant effect on the leaching of heavy metals in alkaline materials such as ISWI ash. The accelerated carbonation process with $CO_2$ absorption was investigated to confirm the leaching behavior of heavy metals contained in ISWI ash including fly and bottom ash. Only the temperature of the chamber at atmospheric pressure was varied and the $CO_2$ concentration was kept constant at 99% while the water-to-solid ratio (L/S) was set at 0.3 and $3.0dm^3/kg$. In the result, the concentration of leached heavy metals and pH value decreased with increasing carbonation reaction time whereas the bottom ash showed no effect. The mechanism of heavy metal-stabilization is supported by two findings during the carbonation reaction. First, the carbonation reaction is sufficient to decrease the pH and to form an insoluble heavy metal-material that contributes to a reduction of the leaching. Second, the adsorbent compound in the bottom ash controls the leaching of heavy metals; the calcite formed by the carbonation reaction has high affinity of heavy metals. In addition, approximately 5 kg/ton and 27 kg/ton $CO_2$ were sequestrated in ISWI bottom ash and fly ash after the carbonation reaction, respectively.

• Journal of Life Science
• /
• v.21 no.10
• /
• pp.1393-1400
• /
• 2011

We investigated the mineral content and antioxidant activity of Portulaca oleracea for biological properties. Total mineral content was 6025.80 mg/100 g, and potassium was the highest at 3846.99 mg/100 g. Water and 80% ethanol extract yields were 14.84% and 24.93%, respectively. The contents of phenolic compounds and flavonoids of ethanol extract were 58.16 mg/g and 20.08 mg/g, and were significantly higher than that of its water extract (49.09 mg/g and 14.98 mg/g, respecitvely). Antioxidant activities and nitrite scavenging activity was significantly elevated in a dose-dependent manner, and that of ethanol extract was higher than that of the water extract. ${\alpha}$-Glucosidase inhibition activity of ethanol extract was significantly higher than the water extract as well. We suggest that the biological properties of Portulaca oleracea are due to its mineral and phenolic contents.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.2
• /
• pp.99-106
• /
• 2010

The effects of additive and shrinkage reducing agent on the drying and autogenous shrinkage of high strength concrete are investigated in this study. As results, when the ratio of W/B(low water to binder ratio) increase, the compressive strength is decreased. Comparing with PC(portland cement) concrete, the strength is 2.8%, 3.2% and 3.8% lower respectively than that of PC when concrete mixing ratio is 0.2%, 0.3% and 0.4% in 28 days curing. Drying shrinkage strain of PC concrete showed $-650{\times}10^{-6}$ in 91 days curing. When SR(shrinkage reducing agent) of 0.2%, 0.3% and 0.4% is mixed, the drying shrinkage strains are 21%, 34% and 41% lower than those of PC in 91 days curing. Autogenous shrinkage strain of PC concrete appeared $-480{\times}10^{-6}$ in 56 days curing. When SR of 0.2%, 0.3% and 0.4% is mixed, the autogenous drying shrinkage strain are 12.5%, 19.8% and 33.3% lower than those of PC in 56 days curing. In cases of using the mineral and shrinkage agent or only using a shrinkage reducing agent also appeared same reducing effects for drying shrinkage and autogenous shrinkage.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.107-108
• /
• 2023

In this study, in CO₂ sequestration was carried out through pressure carbonation for concrete slurry water to realize carbon neutrality in the cement industry. As a result of the experiment, it was confirmed that as the pressure of CO₂ increased, the pH decreased and the amount of CaCO₃ produced increased. However, despite the CO₂ pressure of 5 bars, the carbonation reaction for 10 minutes alone did not proceed completely.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.1-10
• /
• 2008

Synthetic mineral microparticles (SMM) is a patented system which has been developed to promote drainage of water and retention of fine particles during papermaking. It is shown in patents that the SMM system can have advantages in both of drainage and retention, compared with montmorillonite (bentonite), which is one of the most popular materials presently used in this kind of application. Turbidity and gravity drainage time were measured using a Britt-Jar test with representative SMM formulations, in order to confirm the efficacy of SMM covering a wide range of compositions and discover effects of some key variables that have the potential to lead to unexpected advantages in terms of the effectiveness of the microparticles, when used in combination with a cationic polyacrylamide treatment of papermaking furnish. An iron silicate showed highest retention performance, as well as suitably fast drainage time relative to other metal silicate and bentonite. Zinc silicate improved retention and drainage. SMM synthesized from aluminum sulfate ($Al_2(SO_4){_3}$) did not show a benefit in retention and drainage, relative to bentonite. SMM synthesized from aluminum chloride ($AlCl_3$) performed better in drainage and retention than bentonite when the Al/Si ratios were 0.76 and 1.00. It was found that when the Al/Si ratio and neutralization are considered, pH variation due to the change of Al/Si ratio can be a key factor to control the size of primary metal silicate particles and the degree of coagulation of the primary particles.

• Resources Recycling
• /
• v.16 no.1 s.75
• /
• pp.44-53
• /
• 2007

The Jeonju-Il mine tailings contain large quantities of $SiO_2\;and\;Al_2O_3$ and lesser quantities of metallic components. In this study, we studied about the possibility of using mine tailings as a raw material in various industries. it was found that the sintered mine tailings had a good quality in every respect such as chromaticity, firing shrinkage and water absorption etc. Therefore if can substitute clay mineral in the ceramic industry. Also it can substitute about 2.94% of the raw materials of ordinary portland cement. We can use the coarse tailing as the fine aggregate for the ready-mixed mortar; and the fine tailing, as the filler for the bituminous paving mixture; because both products were not only suitable for Korea industrial standard in quality, but also environmentally harmless.

• Fashion & Textile Research Journal
• /
• v.12 no.2
• /
• pp.219-223
• /
• 2010

In this study, the comfort properties of cotton and Hanjee fabrics dyed with Inonotus obliquus and treated with illite were evaluated and compared. Results were as follows; 1) W/T values and WC/W values of cotton and Hanjee fabrics were decreased when they were dyed with Inonotus obliquus and treated with illite. 2) Although air permeability of cotton fabrics was higher than that of Hanjee fabrics, air permeability of cotton and Hanjee fabrics dyed with Inonotus obliquus and treated with illite was decreased. 3) Thermal conductivity of cotton and Hanjee fabrics dyed with Inonotus obliquus was increased whereas thermal retain property was decreased. 4) Water absorption of Hanjee fabrics was higher than that of cotton fabrics. Water absorption of cotton and Hanjee fabrics dyed with Inonotus obliquus and treated with illite was increased. 5) Deodorization rate of Hanjee fabrics was greater than that of cotton fabrics.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.4
• /
• pp.709-722
• /
• 2011

This study was investigated to obtain basic data which can be applied to processing of retort pouched seasoned sea mussel. Shell was washed and steamed before shucking. Sea mussel meat was seasoned in boiled and mixed seasoning sauce(soy sauce 23%, monosodiun glutamate 2%, sorbitol 2%, sesame oil 1%, vinegar 2%, starch syrup 15%, water 55%) for 30 min. The seasoned sea mussel was vacuum packed in plastic film bag and sterilized for various Fo values(Fo 7~13 min.) in a hot water circulation system retort at $121^{\circ}C$. The chemical composition such as pH, VBN, amino-N, total amino acid, free amino acid, color value (L, a, b), texture profile, TBA value, mineral, sensory evaluation and viable cells count of the retort pouched seasoned sea mussels sterilized with various conditions(Fo 7~13 min.) were measured. The same experimental items were also measured during storage. There was no remarkable difference between sterilization conditions and sensual characteristics. The results showed that the product sterilized at Fo 7 min. was the most desirable because this condition is most economical.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.4
• /
• pp.662-672
• /
• 2011

This study was investigated to obtain basic data which can be applied to processing of canned seasoned kwamaegi. Commercial Kwamaegi was cut into $2{\times}3cm$ lengths, filled 90 g into can (301-3) and added with 60 g water before precooking for 10 min. at $100^{\circ}C$. The precooked Kwamaegi was packed into the can, and added with 60 g seasoning sauces, which was prepared by mixing soy sauce 23%, monosodium glutamate (MSG) 2%, sorbitol 2%, sesame oil 1%, vinegar 2%, starch syrup 17%, sake 5%, water 48%. The cans were sealed using a vacuum seamer and then sterilized for various Fo values (Fo 8~12 min.) in a steam system retort at $121^{\circ}C$. The factors such as pH, VBN, amino-N, total amino acid, free amino acid, color value (L, a, b), texture profile, TBA value, mineral, sensory evaluation and viable bacterial count of the canned seasoned Kwamaegi produced with various sterilization condition(Fo 8~12 min.) were measured. There was no remarkable difference between sterilization conditions and sensual characteristics. The results showed that the product sterilized at Fo 8 min. was the most desirable because this condition is most economical.