• Journal of the Korean Ceramic Society
• /
• v.33 no.11
• /
• pp.1276-1284
• /
• 1996

Ultrafine calcim carbonate powders with the size of 0.05~0.1 ${\mu}{\textrm}{m}$ and the calcite phase were prepared by the nozzle spouting method which was conducted by spouting calcium hydroxide slurry in reactor filled with CO2 gas. Well dispersed ultra-fine particles were synthesized in condition of high Ca(OH)2 concentration of the slurry ( 0.5wt%) synthesized calcium carbonate powder was shown the large particle size with agglo-meration.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.474-475
• /
• 2007

Wire electrical explosion(WEE) has been used for the production of fine metal particles. In WEE, electrical powder was stored and compressed into capacitor and released to produce fine particles through evaporation and condensation. In this study, the effect of applied voltage on the size of copper powders was investigated. High tension was added up to the explosion device by dividing 4 steps. At voltages lower than 5.2 kV, the fraction of powders finer than $44{\mu}m$ was almost negligible. The effectiveness of explosion increased sharply with increased voltage over 5.8 kV. At the highest voltage of 6.4 kV, more than 80% of explosion products were finer than $44{\mu}m$.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.4
• /
• pp.431-445
• /
• 2022

A quantitative phase analysis method of X-ray powder diffraction was studied to determine the mineral content of clay-rich rocks practically as well as effectively. For quantitative X-ray powder diffraction analysis of the clay-rich rocks, it is necessary to prepare whole-rock powder samples with a random orientation by side mounting method. In addition, for the identification of the clay minerals in the rock, it is required to prepare an oriented mount specimen with a clay particle size of 2 ㎛ or less, ethylene glycol treatment, and heat treatment. RIR (reference intensity ratio) and Rietveld method were used for the quantitative analysis of the clay-rich rocks. It was possible to obtain the total clay and the non-clay minerals contents from the whole-rock X-ray diffraction profiles using the RIR values. In addition, it was possible to calculate the relative content of each clay mineral from the oriented X-ray diffraction profiles of the clay particle size and assign it to the total clay. In the Rietveld method of whole-rock X-ray diffraction, effective quantitative values were obtained from the Rietveld diffraction patterns excluded the region of less than 10 degrees (2θ). Similar quantitative values were shown in not only the RIR but the Rietveld methods. Therefore, the analysis results indicate a possibility of a routine quantitative analysis of clay-rich rocks in the laboratory. However, quantitative analysis of clay minerals is still a challenge because there are numerous varieties of clay minerals with different chemical and structural characteristics.

• Journal of Nutrition and Health
• /
• v.38 no.5
• /
• pp.380-385
• /
• 2005

This study was designed to investigate the effects of mulberry leaf powder supplementation on lead (Pb) status and mineral (Ca, Fe, Cu and Zn) content in Pb-administered rats for 4 weeks. Thirty two male rats were divided into 4 groups: a control, Pb, Pb5M (500 ppm $Pb + 5\%$ mulberry leaf powder), and Pb10M (500 ppm $Pb + 10\%$ mulberry leaf powder). There were no significant differences in food intake and initial body weight among groups. Mulberry leaf powder treatments showed significant decreases in food efficiency ratio and body weight gain. But FER of $Pb5M\%$ and Pb10M were significantly increases than that of Pb group. The levels of serum aspartate transaminase (AST) and creatinine were decreased by mulberry leaf powder treatment. Minerals content of liver and kidney were significantly decreased in the Pb groups than that of control group. Whereas, fecal minerals content were significantly increased in the Pb5M and Pb10M than those of control group. Pb content of serum, liver and kidney was significantly increased in the Pb group than those of control group. However, by mulberry leaf powder administration (Pb5M and Pb10M), Pb level of serum, liver and kidney were lowered than that of Pb group. And fecal Pb excretion was significantly increased in the Pb5M and Pb10M than that of Pb group. These results showed mulberry leaves were effective for lowing Pb accumulation in serum, organs, which may have potential to prevent Pb toxicity.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.38 no.2
• /
• pp.25-30
• /
• 2019

Atmospheric-pressure plasma technique is a technology for sterilizing agricultural product. In this study, dielectric barrier discharge plasma was applied to silkworm powder for 1 to 5 h with less than 2 ppm of $O_3$ and $NO_2$. Quantitative compositions including proximate contents, mineral and heavy metal contents, fatty acids, vitamins, and DNJ contents were measured. Proximate contents of silkworm powder were protein (57.2%), fat (9.9%), fiber (4.6%), ash (10.1%), and moisture (5.7%). These compositions were not affected by the treatment of plasma. Silkworm powder has 5 abundant minerals potassium (K), phosphorus (P), sulfur (S), calcium (Ca), and magnesium (Mg). Among these minerals, plasma treatment decreased the contents of P and S sharply from 732.3 to 176.8, and 492.7 to 185.2 mg/100g, respectively. Heavy metal contents including lead (Pb), cadmium (Cd), arsenic (As), and mercury (Hg) were not detected in the silkworm powder. Five vitamins such as ascorbic acid (13.6 mg/100g), riboflavin (5.4 mg/100g), ${\beta}$-carotene (1.8 mg/100g), niacin (0.6 mg/100g), and thiamine (0.4 mg/100g) were not significantly changed by plasma treatment. Silkworm powder is composed of 30 parts saturated fatty acids and 70 parts unsaturated ones. The fatty acid composition was not significantly changed by plasma treatment. The DNJ content of silkworm powder (3.72 mg/g) was also nearly constant within the experimental condition of plasma treatment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.225-226
• /
• 2021

Recently, environmental problems have emerged as a major issue all over the world due to an increase in carbon dioxide(CO₂). The amount of CO₂ generated during cement production accounts for 6% to 8% of domestic CO₂ emissions and a solution to reduce CO₂ emissions the construction industry is trying to use mineral admixtures to reduce cement. Since digestion has no firing process the advantage of it is that there is no air pollution to occur. In this study, we studied the compressive strength of binary non-cement mortar containing rice husk powder extracted from digestion by the ratio of 10%, 20%, 30%, 40%. As a result, the table flow was increased when the mixing rate of rice husk powder extracted from digestion was higher, and the highest compressive strength was shown when the rice husk powder extracted from digestion mixing rate was 10%.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.409-412
• /
• 2001

The high purity manganese oxides were made from the dust, generated in AOD process that produces a medium-low carbon ferromanganese and collected in the bag filter. Manganese oxide content in the dust was about 90%, and its phase was confirmed as Mn₃O₄. In the extraction of manganese, because of remaining amorphous MnO₂, the dust was reduced to MnO by roasting with charcoal. The pulp density of the reduced dust can control pH of the solution more than 4 and then Fe ion is precipitated to a ferric hydroxide. Because a ferric hydroxide co precipitates with Si ion etc, Fe, Si ion was removed f개m the solution. Heating made water to be volatized and nitrates was left in reactor Then nitrates were a liquid state and stirring was possible. Among the nitrates in reactor, only the manganese nitrate which have the lowest pyrolysis temperature pyrolyzed into β-MnO₂powder and NO₂(g) at the temperature less than 200℃. When the pyrolysis of manganese nitrate has been completed about 90%, injection of water stopped the pyrolysis. Nitrates of impurity dissolved and the spherical high purity β-MnO₂powders were obtained by filtering and washing. Mn₂O₃or Mn₃O₄ powder could be manufactured from β-MnO₂powder by controlling the heating temperature. Lastly, a manufactured manganese oxide particle has 99.97% purity.

• Magazine of the Korea Concrete Institute
• /
• v.15 no.5
• /
• pp.17-23
• /
• 2003

• Resources Recycling
• /
• v.17 no.1
• /
• pp.66-72
• /
• 2008

Fundamental studies for the synthesis of Mn-Zn ferrite powder were investigated using a series of leaching and coprecipitation processes from spent alkaline manganese batteries. Zinc and Manganese dissolution rates obtained at the reaction conditions of 100g/L pulp density, 3.0M $H_2SO_4$, $60^{\circ}C$ and 200 rpm with 30 ml $H_2O_2$ as a reducing agent were more than 97.9% and 93.9% and coprecipitation of Mn-Zn ferrite powder was performed according to various reaction conditions such as temperature, time and amount of $O_2$ gas injection using the leaching solution. As a result of coprecipitation, Mn-Zn ferrite could be synthesized directly at low temperature in the reaction condition pH 12, $80^{\circ}C$, $O_2$ 1.3 L/min. and 400 rpm. The synthesized Mn-Zn ferrite powder was spherical powder of $0.143{\mu}m$ particle size and had a saturation magnetization about 80 emu/g.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.2
• /
• pp.115-127
• /
• 2009

Mineral quantification was performed on sediments of the Ulleung basin by X-ray powder diffraction and the computer software based on Rietveld quantification method. The sediments are dominated by amorphous opal-A with quartz, feldspars, micas, clays, calcite, and pyrite. The opal-A shows iterative variation in abundance with increasing burial depth. In addition, the relative abundance of opal-A is coincident with abundance of organic carbon contents, indicating that the Ulleung sediment consists mostly of amorphous silica derived from organism in the pelagic environment. Upward increase in the abundance of opal-A is markedly shown in the cores located in the slope region. On the other hand, there is a distinct tendency that the abundance of calcite is inversely proportional to that of opal-A. This indicates that the abundance of opal-A increases during the rise of sea level. Also, the fall of sea level lowers the abundance of opal-A.