• Nuclear Engineering and Technology
• /
• v.38 no.5
• /
• pp.423-426
• /
• 2006

A developed neutron activation analysis(NAA) and gamma-spectrometry were applied to improve the analytical sensitivity and precision of impurities in electronic-circuit raw materials. It is well known that soft errors in high precision electronic circuits can be induced by alpha particles emitted from naturally occurring radioactive impurities such as U and Th. As electronic circuits have recently become smaller in dimension and higher in density, these alpha-particle emitting radioactive impurities must be strictly controlled. Therefore, new NAA methods have been established using a HTS(Hydraulic Transfer System) irradiation facility and a background reduction method. For eliminating or stabilizing fluctuated background caused by Rn-222 and its progeny nuclides in air, a nitrogen purging system is used. Using the developed NAA and gamma-spectrometry, ultra trace amounts of U(0.1ng/g) and Th(0.01ng/g) in an alumina ball and high purity silica used for an epoxy molding compound (EMC) could be determined.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.240-242
• /
• 2005

본 연구에서는 생활폐기물 소각장에서 발생하고 있는 바닥재를 이용하여 각 입도에 대해 자력의 세기에 따라 철/비철선별 하였다. 자력의 세기에 따른 분리량과 분리된 산물의 철함 유량을 조사함으로써 자력 및 비철 효율을 파악하고자 하였다. 또한, 비철 선별기를 사용하여 비철 선별 효율을 조사하였다. 자력선별결과, 자력의 세기가 증가할수록 자력선별에 의해 분리량이 증가하였으나, 분리된 산물의 철함유량은 감소하는 경향을 나타내었다. 이러한 결과는 자력세기의 증가가 철회수량의 증가보다는 불순물의 혼입량을 증가시키는 것으로 생각된다. 비철의 경우, 입자크기가 커짐에 따라 분리율이 높았으며, 4.75mm이상에서는 대부분의 비철이 회수되었다.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.05a
• /
• pp.228-230
• /
• 2005

본 연구에서는 생활 폐기물의 소각 바닥재를 사용하여 입도 분리한 후 각 입도별 철 비철 금속이 함유된 바닥재를 자력세기에 따라 분리하였다. 철의 분석결과 4mesh이상의 입자에서 대부분의 철이 회수되었고 4mesh이하에서는 철의 함유량이 적었지만 50mesh 이하의 입자에서는 자력에 의해 대부분 분리되었다. 또한 각 입도에 따른 자력세기별로 철의 회수율을 측정한 결과 $25{\sim}130gauss(30{\sim}150volt)$에서는 낮은 회수율을 보였고 380gauss(150volt이상)의 높은 자력에서만 분리가 일어남을 확인할 수 있었다. 비철은 대부분 4mesh에서 분포하였고 전체적으로 낮은 양이 존재하였다.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.315-324
• /
• 2001

Mechanochemical effects that occurred in the fine grinding process of quartz particles using planetary ball mill was investigated. Quartz particles have been frequently utilized for optical materials, semiconductor molding materials. We determined that grinding for a long time can be create amorphous structures from the crystalline quartz by Mechanochemical effects. But, to be produced nano-composite particles that the critical grinding time reached for composite materials in a short time. Henceforth, a qualitative estimation must be conducted on the filler for EMC(Epoxy molding compound) materials. It can be produced mechanochemically treated composite materials and also an integrated grinding efficiency considering of the nano-composite amorphous structured particles. The mechanochemical characteristics were evaluated based on particle morphology, size distribution, specific surface area, density and the amount of amorphous phase materials into the particle surface. The grinding operation in the planetary ball mill can be classified into three stages. During the first stage, initial particle size was reduced for the increase of specific surface area. In the second stage, the specific surface areas increased in spite of the increase in particle size. The final stage as a critical grinding stage, the ground quartz was considered mechanochemically treated particles as a nano- composite amorphous structured particles. The development of amorphous phase on the particle surface was evaluated by X-ray diffractometry, thermal gravity analysis and IR spectrometer. The amount of amorphous phase of particles ground for 2048 minutes was 85.3% and 88.2% by X-ray analysis and thermal gravity analysis, respectively.

• Journal of Environmental Impact Assessment
• /
• v.20 no.5
• /
• pp.641-649
• /
• 2011

The ground vibration has effect on the human body and the nearby structure. However, it was very difficult to estimate the damage of structure caused by the vibration. Especially, ground vibration must be estimated on the bottom of structure because it was made up of several mediums. In this study, it was considered about the shock vibration on medium characteristics as calculating the peak particle velocity and analysing the vibration waveform. The results are as follows : Firstly, the correlation coefficient of PPV(Peak Particle Velocity) and SD(Scaled Distance) was very high at the vertical component, which was represented to 0.991 in general ground medium and each 0.989, 0.961, 0.925 in concrete medium. And also, the vibration waveform at the vertical component was very good in all mediums. Secondly, the vibration waveform at the longitudinal component was represented to a great amplitude and phase difference in all mediums. It was considered that the vibration waveform occurred the damping when particle velocity by shock vibration was propagated through other medium. Thirdly, the vibration waveform in concrete medium was represented to variation of amplitude in the order of RC medium, NC=H medium, NC=S medium at the vertical component. It was considered that the particle velocity propagated fast when a medium have a big strength and density.

• Particle and aerosol research
• /
• v.10 no.2
• /
• pp.53-59
• /
• 2014

Palladium (Pd) nanoparticles attached graphene (GR) composite was synthesized for an enhanced glucose biosensor. Aerosol spray pyrolysis (ASP) was employed to synthesize the GR-Pd composite using a colloidal mixture of graphene oxide (GO) and palladium chloride ($PdCl_2$) precursor. The effects of the weight ratio of the Pd/GR on the particle properties including the morphology and crystal structure were investigated. The morphology of GR-Pd composites was generally the shape of a crumpled paper ball, and the average composite size was about $1{\mu}m$. Pd nanoparticles less than 20 nm in diameter were deposited on GR sheets and the Pd nanoparticles showed clear crystallinity. The characteristic of the glucose biosensor fabricated with the as-prepared GR-Pd composite was tested through cyclic voltammetry measurements. The biosensor exhibited a high current flow as well as clear redox peaks, which resulted in a superior ability of the catalyst in terms of an electrochemical reaction. The highest sensitivity obtained from the amperometric response of the glucose biosensor was $14.4{\mu}A/mM{\cdot}cm^2$.

• Journal of Environmental Science International
• /
• v.7 no.3
• /
• pp.269-274
• /
• 1998

In order to develop of support medla for bloom reactor, physicochemical properties and attachability of surface of activated carbon, clay mineral, non-clay mineral, and waste mold sand were enamined. Measured physicochemical properties of materials were surface roughness, mean particle size, surface area, hydrophobicity, and surface charge. At a tested materials, activated carbon was the best attachable material and microorganisms were attached $20.1{\times}10^7CFU/cm^2$ at surface, compared with diatomaceous earth which were attached of $9.2{\times}10^7CFU/cm^2$ in our research, surface area and hydrophobicity show- ed more Influence than any other factor on attachment of microorganisms.

• Journal of the Korean Ceramic Society
• /
• v.51 no.2
• /
• pp.132-137
• /
• 2014

The study was performed with low-grade limestone, which is used to make cement or is disposed of due to its low CaO content. In this study, the optimal condition of limestone with which to manufacture precipitated calcium carbonate (PCC) and limestone in fiber was determined through in-situ reactions. The best firing condition is with slaked lime with rapid cooling after 2 h of firing at $1000^{\circ}C$. In addition, the content of CaO can be increased by sorting the low-grade limestone using a 200 mesh filter, and the optical quality of old newspaper (ONP) was similar when using both low-grade and high-grade limestone. Also, controlling the particle size of PCC is an important factor pertaining to the optical characteristics of paper.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.227-234
• /
• 2012

In this study, we make simulation of density log using a Monte Carlo N-Particle (MCNP) algorithm to make an analysis on density logging under different borehole environments, since density logging is affected by various borehole conditions like borehole size, density of borehole fluid, thickness and type of casing, and so on. MCNP algorithm has been widely used for simulation of problems of nuclear particle transportation. In the simulation, we consider the specific configuration of a tool (Robertson Geologging Co. Ltd) that Korea institute of geoscience and mineral resources (KIGAM) has used. In order to measure accurate bulk density of a formation, it is essential to make a calibration and correction chart for the tool under considerations. Through numerical simulation, this study makes calibration plot of the density tool in material with several known bulk densities and with boreholes of several different diameters. In order to make correction charts for the density logging, we simulate and analyze measurements of density logging under different borehole conditions by considering borehole size, density of borehole fluid, and presence of casing.

• Journal of the Korean earth science society
• /
• v.42 no.2
• /
• pp.164-174
• /
• 2021

The study examines the shearing and crushing characteristics of land-derived subaqueous granular materials in a gravel-bed river. A series of large-sized ring shear tests were performed to examine the effect of shear time and shear velocity on the shear stress characteristics of aquarium gravels with a 6-mm mean grain size. Three different shear velocities (i.e., 0.01, 0.1, and 1 mm/sec) were applied to measure the shear stress under the drained (long-term shearing) and undrained (short-term shearing) conditions. Different initial shear velocities, i.e., 0.01→0.1→1 mm/sec and 0.1→0.01→1 mm/sec, were considered in this study. The test results show that the grain crushing effect is significant regardless of drainage conditions. The shear stress of coarse-grained materials is influenced by initial shear velocities, regardless of the drainage conditions. In particular, particle breakage increases as grain size increases. The shearing time and initial shear velocity are the primary influencing factors determining the shear stress of gravels. The granular materials may be broken easily into particles through frictional resistance, such as abrasion, interlocking and fracture due to the particle-particle interaction, resulting in the high mobility of granular materials in a subaqueous environment.