• 제목/요약/키워드: Mine site

검색결과 214건 처리시간 0.024초

폐광산 인근 농경지 및 하천 퇴적토의 중금속 오염 특성 (Distribution of Metallic Elements Contamination in River Deposits and Farmland in the Vicinity of an Abandoned Korean Mine)

  • 이환;이윤진
    • 자원환경지질
    • /
    • 제53권2호
    • /
    • pp.133-145
    • /
    • 2020
  • 본 연구는 대한민국 충청도에 위치한 폐광산을 대상으로 오염경로를 분석하기 위해 갱구, 하천 퇴적토 및 인근 농경지의 중금속 오염 확산 특성을 조사하였다. 연구대상지역에서 갱내수 유출지점으로부터 약 61 m까지 적화현상이 관찰되었고 총 1800 ㎥의 폐석 유실구간이 확인하였다. 갱내수는 우기기간동안 pH 4.9, 황산염의 농도 1557.8 mg/L를 나타냈다. 동일한 기간에 황산염 농도는 하천시료에서 평균 773.6 mg/L으로 나타났다. 하천에서 채취한 황갈색 시료를 분석한 결과 침철석과 페리하이드라이트(ferrihydrite)로 나타났다. 본 연구지역의 주요 오염원은 폐석 손실에 의한 것으로 여겨지며 토양오염우려기준을 초과한 오염 필지는 총 10,297 ㎡로 산정되었다.

현장 파일럿 실험을 통한 광산배수 내 Fe, As, Mn 자연정화처리 효율평가 (A Field Study on the Application of Pilot-scale Vertical Flow Reactor System into the Removal of Fe, As and Mn in Mine Drainage)

  • 권오훈;박현성;이진수;지원현
    • 자원환경지질
    • /
    • 제53권6호
    • /
    • pp.695-701
    • /
    • 2020
  • 본 연구는 중성의 pH 조건에서 Fe, Mn, As이 포함된 복합오염수를 배출하는 광산배수의 수질특성을 모니터링하였다. 침출수를 처리하기 위해 모래와 석회석으로 이루어진 수직흐름반응조(VFR, Vertical Flow Reactor)와 제강슬래그와 석회석을 적용한 반응조(ZMR)로 구성된 현장파일럿 장치를 설치하여 약 6개월간 운영하였다. 광산배수 내 존재하는 Fe, Mn, As에 대한 현장파일럿 장치의 처리효율을 평가하였다. 중성의 알칼리 수질특성을 가진 D광산 침출수에 VFR와 ZMR 공정을 적용한 결과, pH와 알칼리도가 효과적으로 상승하여 Fe과 As가 99%이상 제거되었으며 Mn은 98%이상 제거하여 복합오염물질 처리가 가능함을 확인하였다. 본 연구결과를 통해 Fe, As, Mn이 포함된 소규모 광산배수에 자연정화기반의 공법이 적용가능함을 확인하였다.

용화광산 일대의 토양오염 및 물-광미 반응에 의한 중금속 용출 특성 연구 (Studies on Characterization of Soil Pollution and Variations of Heavy Metal Contents after Water-Tailings Reaction from Yonghwa Mine)

  • 강한;김영훈;장윤득;김정진
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제18권1호
    • /
    • pp.85-93
    • /
    • 2013
  • This study is conducted to evaluate the leaching of contaminants from mine tailing by natural water and finally to estimate the leaching and transportation of heavy metal contaminants by rainfall. In order to identify contaminated heavy metal of soil, 17 soil, 2 tailing and 2 waste dump and 2 control samples were taken at mine area and analyzed total metal contents. The leaching experiments were conducted using distilled water. Cu, Pb, Zn was extracted from the reddish mine tailing in a short period time, especially the extraction rate of Cu (45.0%) was highest. The contaminants were leached from the yellowish mine tailing within an hour and the leaching rate of Cd (42.0%) and Zn (17.2%) were relatively high. The reddish soil from the waste dump showed leaching of Cu (5.1%), Pb (4.0%) and Zn (3.3%), however the leaching rate was low except Mi (14.2%). From the yellowish soil sampled from the dumping site, the leaching of Cu (8.2%) and Ni (9.7%) was high while the leaching of Zn (0.2%) were relatively low.

Post-pillars design for safe exploitation at Trepça hard rock mine (Kosovo) based on numerical modeling

  • Ibishi, Gzim;Genis, Melih;Yavuz, Mahmut
    • Geomechanics and Engineering
    • /
    • 제28권5호
    • /
    • pp.463-475
    • /
    • 2022
  • In the mine exploitation stage; one of the critical issues is the stability assessment of post-pillars. The instability of post-pillars leads to serious safety hazards in mining operations. The focus of this study is to assess the stability of post-pillars in the 130# stope in the central ore body at Trepça hard rock mine by employing both conventional (i.e., critical span curve) and numerical methods (i.e., FLAC3D). Moreover, a new numerical based index (i.e., Pillar Yield Ratio-PYR) was proposed. The aim of PYR index is to determine a border line between stable, potentially unstable, and failure state of post-pillars at a specific mine site. The critical value of pillar width to height ratio is 2.5 for deep production stopes (e.g., > 800 m). Results showed that pillar size, mining height and mining depth significantly have affected the post-pillar stability. The reliability of numerical based index (i.e., PYR) is verified based on empirical underground pillar stability graph developed by Lunder, 1994. The proposed pillar yield ratio index and pillar stability graph can be used as a design tool in new mining areas at Trepça hard rock mine and for other situations with similar geotechnical conditions.

Arsenic and heavy metal contamination in the vicinity of the abandoned Dongjung Au-Ag-Cu mine, Korea

  • Chung EunHye;Lee Jin-Soo;Chon Hyo-Taek;Sager Manfred
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
    • /
    • pp.536-539
    • /
    • 2003
  • The Dongjung Au-Ag-Cu mine area was seriously contaminated with As and heavy metals-Cd, Cu, Hg, Mn, Pb and Zn etc. Those elements were highly accumulated in plants grown at farmland as well as farmland soil. Stream waters and groundwater which has been used as drinking water around the mine site contain high levels of heavy metals, especially As. As a result of human health risk assessment using EHS(Extraction of Heavy metals in Stomach and Small intestine) test for bioaccessible contents of heavy metals, there is a potential of cancer and adverse effects on human health for the residents of the mine area.

  • PDF

Design of Passive Treatment Systems for Mine Drainage Waters

  • Jeen, Sung-Wook
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제22권2호
    • /
    • pp.1-9
    • /
    • 2017
  • Passive treatment systems are commonly used for remediation of mine drainage waters because they do not require continuous chemical inputs and operation. In this study, the selection and design criteria for such systems were evaluated, particularly the two most commonly used ones, i.e., permeable reactive barriers (PRBs) and vertical flow biological reactors (VFBRs). PRBs and VFBRs are operated on the same principles in terms of biochemical reaction mechanisms, whereas differences relate to configuration, engineering, and water management. In this study, each of these systems were described with respect to key design variables, such as metal removal mechanisms and removal rates, effectiveness and longevity, general design and construction, flow capacity, and cost. The information provided from this study could be used as a design guideline when a passive treatment option is considered for potential remediation of a mine site.

폐광산의 AMD 오염영역탐지를 위한 지구물리탐사 (Geophysical Surveys for Mapping of the AMD Contaminant Channels at an Abandoned Mine)

  • 김지수;최상훈;한수형
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2000년도 추계학술대회
    • /
    • pp.258-261
    • /
    • 2000
  • Geophysical surveys (electrical resistivity, self-potential, and magnetic methods) and streamwater sample analysis have been carried out at a site of tailings of waste deposits in an abandoned mine, Jangpoong, which is situated in Kowesan-Gun, Chungbuk-Do. The research was aimed at investigating the suitability of the various geophysical methods for detection of AMD (acid mine drainage) paths, and ultimately mapping of preferred AMD flow channels by incorporating the water sample analysis. Electrical resistivity section from the dipole-dipole line represents the low-resistivity zone trending northwest toward the stream nearby. The positions of the resistivity anomalies for AMD channels are well correlated to the ones from the various geophysical surveys. In addition they correspond to the sites of the higher peaks for the pH, EC, heavy metal content for the water sample data.

  • PDF

라이다 기반 정밀 형상 모델 활용 석회석 광산 지반침하 원인분석 사례연구 (A Case Study on the Cause Analysis of Subsidence in Limestone Mine Using LiDAR-Based Geometry Model)

  • 고휘철;하태욱;정상원;박승현;김승태
    • 터널과지하공간
    • /
    • 제33권3호
    • /
    • pp.126-140
    • /
    • 2023
  • 본 연구에서는 석회석 광산에서 발생한 지반침하지에 대해 라이다 기반 정밀 형상 모델을 활용하여 침하 원인을 분석하였다. 드론 및 지상 기반 라이다 시스템을 활용하여 침하지 지표 및 갱도에 대한 정밀 형상 모델 구축을 수행하고 현장 지질조사 및 암반 분류 결과를 활용하였다, 정밀 형상 모델을 통해 침하지 주변부 크라운필러 두께 및 단층 분포, 침하지 및 침하 적치물 부피 계산, 침하 지표 경사 분석을 수행하였다. 이와 같은 분석을 통해 석회석 광산에서 발생한 지반침하 원인을 규명하였다.

알럼 응집을 이용한 광산폐기물 적치장 침출수 내 불소 제거 연구 (A Study on the Removal of Fluorine from Leachate of Reclaimed Mine Waste Dump Site Using Alum Coagulation)

  • 이상우;이우춘;김성희;정상헌;이보영;이상환;김순오
    • 광물과 암석
    • /
    • 제36권1호
    • /
    • pp.19-32
    • /
    • 2023
  • 본 연구에서는 S광산의 광산폐기물 적치장 침출수에 함유된 불소의 처리를 위해(1) Ca계 물질을 이용한 공침법; (2) 활성탄과 비산회를 이용한 흡착법; (3) 알럼을 이용한 응집침전법 등을 이용한 불소(초기 농도 9.5 mg/L) 제거 실험을 수행하였다. Ca계 물질을 이용한 공침법의 경우 최대 65.6%, 활성탄 흡착법 27.9%, 비산회 흡착법 71.5%, 알럼을 이용한 응집침전법은 최대 96.6%의 불소 제거 효율을 보였다. 또한 불소의 제거에 있어 높은 제거 효율을 보인 알럼을 이용하여 모의 침출수를 대상으로 실험실 내 반응조에서 수행한 연속 처리 공정 가능성 검토결과, 저농도(6.4 mg/L), 고농도(15.7 mg/L) 모의 침출수를 불소의 국내 청정 지역 배출수 허용 기준인 3 mg/L이하로 처리하는 것이 가능한 것으로 나타났다. 또한 벤치 규모 반응조 운영을 통한 현장 불소 제거 실험 결과, 적정한 운영 및 관리를 하는 경우 불소의 방류수 수질기준을 만족시킬 수 있음을 확인하였다.

가행광산 지역의 비점오염물질 유출특성 (Characteristics of NPS Pollution from a Coal Mining)

  • 서지연;신민환;원철희;최용훈;정명숙;임경재;최중대
    • 한국물환경학회지
    • /
    • 제26권3호
    • /
    • pp.474-481
    • /
    • 2010
  • This study was conducted to describe the characteristics of Non-point source (NPS) Pollution discharge from a coal mining area in Korea. The study areas is located on the Dogye site, Samchuk, Kangwon Province Coal Corporation and the Jangsung site, Taebaek, Kangwon Province Coal Corporation. The monitoring system was installed at a drainage channel and water samples and rainfall events were collected during March 2008 to February 2009. The collected water samples were analyzed with respect to SS, BOD, $COD_{Cr}$, $COD_{Mn}$, T-N, T-P, and TOC, respectively. It was observed that the runoff and water quality were largely influenced by mine drainage. Also a significant relationship was observed from the correlation between flow and water quality, flow and NPS. And estimated Event Mean Concentration (EMC), NPS pollution loads were Dogey coal mine and Taeback coal mine respectively. As the study progresses in the future, runoff and pollution loads will be updated.