• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.79-83
• /
• 2001

A verification of multi-spindles drilling NC data is presented. The drilling of multi-spindles can offer productivity over three times as fast as that of single spindle. The most important things in machining tube sheet are precision of hole position and machining time. The drilling of multi-spindles has difficulties in controlling many motors to drive spindles and assign a correspondent number to each spindles. Multi-spindles drilling has different codes from CNC milling ; many subroutines, assignment of spindle, and so on. The conventional method, which inspects the NC code of the drilling, is to drill holes on a thin plate or tube sheet previously. The method results in low productivity because it consumed long machining time and welding for correction. This paper describes details of multi-spindles NC code and operation of multi-spindles drilling machine. A verification software of the multi-spindles drilling NC code is developed on the details.

• 한국정밀공학회지
• /
• 제15권6호
• /
• pp.79-89
• /
• 1998

In determining optimal cutting condition for face milling operation, tool wear is an important factor. For the purpose of establishing the relationship between various machining factors and tool wear, cutting tests have been performed. As a result, hardness and chemical composition of workpiece material, chemical composition and grain size of cutting tool and cutting speed have been selected as machining factors. In addition, relationship between feed rate and workpiece hardness has been observed. Prior to utilizing cutting conditions recommended by ‘Machining Data Handbook(MDH)’ as a knowledge base, an analysis for the validity of the MDH has been provided. Based on this analysis, tool life criteria applied by MDH has been modified. Finally, using MDH recommended data for neural network trainning, the results from the trained neural network for optimal cutting condition for some given workpiece and cutting tool can be used as reference cutting conditions.

• 산업경영시스템학회지
• /
• 제24권69호
• /
• pp.133-143
• /
• 2001

가공조건은 가공비용과 시간을 줄이고 제품의 품질을 결정하는데 영향을 주는 주요 요인중의 하나이다. 본 논문에서는 밀링 공정을 위한 작업설계(Operation Planning) 시스템에서, 가공조건을 지속적으로 향상시키기 위한 새로운 방법론을 제안한다. 제안된 방법론은 밀링 작업에 대하여 (1) 퍼지 아트맵 신경회로망 모델에 의해 가공조건을 실시한 학습하고 (2) 교체 알고리즘이라 불리는 새로운 알고리즘을 포함한다. 제안된 교체 알고리즘은 기존의 학습 정보보다 효율적인 새로운 가공조건이 얻어졌을 때 이를 이용하여 기존의 학습 정보보다 효율적인 새로운 가공조건이 얻어졌을 때, 이를 이용하여 기존의 학습 정보를 대체하는 기능을 수행한다. 본 논문에서는 우선 작업설계 시스템의 전반적인 기능을 간략히 소개한 후 제안된 방법론에 의한 의사결정 과정을 자세히 기술한다. 또한, 다양한 시뮬레이션을 통하여 제안된 방법론의 의한 의사결정 과정을 자세히 기술한다. 또한, 다양한 시뮬레이션을 통하여 제안된 방법론의 성능을 예시하도록 한다.

• 한국CDE학회논문집
• /
• 제6권4호
• /
• pp.244-253
• /
• 2001

For more complete process planning, machining sequence determination is critical to attain machining economics. Although many studies have been conducted in recent years, most of them suggests the non-unique machining sequences. When the tool approach directions(TAD) are considered fur a feature, both machining time and number of setups can be reduced. Then, the unique machining sequence can be extracted from alternate(non-unique) sequences by minimizing the idle time between operations within a sequence. This study develops an algorithm to generate the best machining sequence for composite prismatic features in a vertical milling operation. The algorithm contains five steps to produce an unique sequence: a precedence relation matrix(PRM) development, tool approach direction determination, machining time calculation, alternate machining sequence generation, and finally, best machining sequence generation with idle times. As a result, the study shows that the algorithm is effective for a given composite feature and can be applicable fur other prismatic parts.

• 산업공학
• /
• 제7권3호
• /
• pp.113-123
• /
• 1994

사용자 고유의 공정설계 노하우는 설계 도면정보에서 가공정보로의 변환의 일관성 유지를 어렵게 하고 또한 그 기술획득에 많은 시간을 필요로 한다. 가공방법과 가공기계가 결정된 후, 세부 작업내용, 작업순서, 절삭공구, 절삭조건, 공수 등을 결정하는 밀링 작업계획 모듈을 공작기계 부품을 대상으로 개발하였다. 설계 도면정보를 특징형상에 따라 입력하여 최적절삭조건 모듈 및 I/MILL 상용 프로그램의 도움을 받아 작업지시서와 NC 프로그램을 출력한다. 특징형상을 중심으로 작업계획 생산정보의 입／출력 내용과 작업계획 항목을 결정하는 본 시스템 개발을 통해 생산정보 통합 기술에 대한 이해를 기대한다.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.61-69
• /
• 2005

This paper presents the experimental results to analyze the atomization characteristics and environmental impact of cutting fluid in grinding process. Grinding is a major machining process to improve surface quality with different machining mechanism which is compared with turning or milling process. The environmental impact due to aerosol generation via grinding process is a major concern associated with environmental consciousness. Experimental results show that the generated fine aerosol which particle size less than 10 micron appears near working zone under given operational conditions. The aerosol concentration is much higher enough to affect human health risk with its generated aerosol quantities. This study can be provided a basic knowledge fur further research of environmental consciousness machining development.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.20-25
• /
• 1994

절삭공정의 자동화의 무인화를 달성하기 위해서는 경험을 가진 작업자의 역활이 컴퓨터에 의한 자동적인 감시 및 제어시스템으로 대체되어야 한다. 특히 공작기계에서 발생할 수 있는 자체의 고장이나 절삭과정중에 발생하는 이상상태를 실시간으로 검출하여 원인을 자동적으로 진달 할 수 있어야 한다. 절삭가공 공작기계의 이상상태 감시 및 진단의 현황을 살펴보면 주로 공구상태의 감시와 채터 감시가 연구의 대상 이 되고 있다. 공구상태의 감시는 공구의 마모와 파단을 검출하고 있다. 이 중에서 공구의 파단은 발생 즉시 실시간으로 감시되어야 한다. 밀링작업에서는 1회전 이내의 공구회전에 파단을 검출하고 기계를 정지시켜야 한다. 최근의 절삭가공에서는 절삭공구로 강력절삭을 위해 고경도 재료를 사용함에 따라 공구의 파단이 빈번하게 발생하고 있다. 정면밀링과 같은 단속절상에서는 절삭날이 큰 충격을 받으므로 더욱 파단에 대한 감시가 필요하다.

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.147-153
• /
• 1997

Fault diagnosis technique in machining system which is one of engineering techniques absolutely necessary to automation of manufacturing system has been proposed. As a whole, diagnosis process is explained by two steps: sensor data acquisition and reasoning current state of system with the given sensor data. Flexible disk grinding process implemented in milling machine was employed in order to obtain empirical manufacturing process information. Resistance force data during machining were acquired using tool dynamometer known as sensor which is comparably accurate and reliable in operation. Tool status during the process was analyzed using influnece diagram assigning probability from the statistical analysis procedure.

• 한국정밀공학회지
• /
• 제14권7호
• /
• pp.99-107
• /
• 1997

An algorithm is developed to find optimal machining parameters for multiple machining environments. The cutting rate-tool life (R-T) characteristic curve presents the general loci of optima and is useful for the flexible machining operations planning. The R-T characteristic curve for the machining economics prob- lems with linear-logarithmic tool lofe model may be determined by applying sensitivity analysis to log-dual problems. Three cases of the change of machining environments are considered. An end milling example is constructed to illustrate the algorithm.

• 한국가금학회지
• /
• 제6권2호
• /
• pp.91-102
• /
• 1979

The basic problem of the broiler industry is that of fluctuating prices, mainly thanks to unstable supply of and inelastic demand for products as usually indicated as a peculiarity of agricultural commodities. This particularly brings the producer to a great economic risk, because he has to sell products under the condition of pure competition, whereas others from whom he has to buy deal under the condition of oligopoly or even monopoly. Therefore, producers economic position is generally placed in the worst comparing others dealing with, which results in unbalanced economic status of elements involved in broiler operation and further obstruction of industry development as a whole. A certain type of business coordination to overcome such a problem should be measured in order to improve the efficiency of entire operation and thus assure the balanced industry development. The concept of the economic integration developed in modern business system had been adapted to U.S. poultry industry which became common later around the world as a means of stabilizing producers price and whole industry as well. There are two main typos of integration; horizontal and vertical The former refers to the general grouping of similar business units, eg. a hatchery tying with other hatchery, while the latter refers to the knitting together of two or more stages of economic activities, eg. tying together among units of hatching, fled milling, production, processing and marketing. By having the industry integrated, risk and uncertainty involved in various stages of operation could be diversified. The typo of integrating contract between producers and integrators include the share of profits, flat fee payment, feed conversion payment and salary basis. In the U.S., extensive changes in production, processing, and marketing during the last few decades have changed the thicken broiler industry from one of small, widely scattered farms to one that is largo, concentrated and efficient. More than 99 percent of all broilers produced are grown under contract and by integrated firms which vary in size of operation and complexity. About 84 percent of all production is concentrated in 10 States. Some of the other factors ;hat contributed to these choses arc costs, energy use, prices, processing, marketing and demand. No integrated broiler production system has yet been applied in Korea's poultry industry, thus all stages all broiler operation run independently seeking for its own profit. Consequently, producers price fluctuate very widely around the year even more than 50 percent in a few months. This also leads to disadvantages of material supplies, processors and distributors and enforce the industry unstable. The current economic environment in Korea seems that the time for broiler integration comes and as an ideal integrator, feed millers, food processors and producers group may be considered.