• 한국산업보건학회지
• /
• 제8권2호
• /
• pp.209-223
• /
• 1998

The aim of this study was to evaluate welders' exposure to hexavalent chromium (Cr(VI)) and nickel (Ni) during welding operations in a Korean shipyard. The airborne Cr(VI) and Ni concentrations were measured during metal inert gas (MIG) welding on mild and stainless steel, and manual metal arc (MMA) welding on mild steel. The geometric mean (GM) of Cr(VI) concentrations inside the welding helmet during MIG welding on mild steel were $0.0018mg/m^3$ inside a ship section, and $0.0015-0.0026mg/m^3$ at the welding shops. All of the personal breathing zone air samples were below the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value ($TLV^{(R)}$) of $0.01mg/m^3$. Conversely, eighty-eight percent(21 of 24) of the personal breathing zone air samples exceeded the National Institute for Occupational Safety and Health (NIOSH) recommended exposure limit of $0.001mg/m^3$. Ni was not detected on 20 of 23 air samples collected during MIG welding on mild steel. The three Ni samples above the limit of detection ranged from 0.015 to $0.044mg/m^3$. The GM of Cr(VI) concentrations during MMA welding on mild steel were $0.0013mg/m^3$, but Ni was not detected in the air samples during this operation. It is assumed that the airborne Cr(VI) and Ni during mild steel welding were derived from the base metals which contained about 0.03% Cr and 0.03% Ni. The GM of airborne total Cr, Cr(VI) and Ni concentrations during MIG welding on stainless steel were 4.02, 0.13 and $0.86mg/m^3$, respectively, and the levels of Cr(VI) and Ni were above the ACGIH-$TLV^{(R)}$. Cr(VI) comprised about 35.5% of the total chromium(Cr) from MIG welding on mild steel, and about 8.4% of total Cr from MIG welding on stainless steel. The ratios of Cr(VI) to total Cr were significantly different among welding shops. It was concluded that welders were exposed to high levels of Cr(VI) and Ni during welding on stainless steel, and were exposed to low levels of Cr(VI) even during welding on mild steel.

• 한국재료학회지
• /
• 제22권11호
• /
• pp.591-597
• /
• 2012

For heat exchanger applications, 2-ply clad materials were fabricated by rolling of aluminum (Al) and mild steel sheets. Effects of annealing temperature on interface properties, especially on inter-layer formation and softening of strain hardened mild-steel, for Al/mild steel clad materials, were investigated. To obtain optimum annealing conditions for the Al/mild steel clad materials, annealing temperature was varied from room temperature to $600^{\circ}C$. At the annealing temperature about $450^{\circ}C$, an inter-layer was formed in an island-shape at the interface of the Al/mild steel clad materials; this island expanded along the interface at higher temperature. By analyzing the X-ray diffraction (XRD) peaks and the energy dispersive X-ray spectroscopy (EDX) results, it was determined that the exact chemical stoichiometry for the inter-layer was that of $Fe_2Al_5$. In some samples, an X-layer was formed between the Al and the inter-layer of $Fe_2Al_5$ at high annealing temperature of around $550^{\circ}C$. The existence of an X-layer enhanced the growth of the inter-layer, which resulted in the delamination of the Al/mild-steel clad materials. Hardness tests were also performed to examine the influence of the annealing temperature on the cold deformability, which is a very important property for the deep drawing process of clad materials. The hardness value of mild steel gradually decreased with increasing annealing temperature. Especially, the value of hardness sharply decreased in the temperature range between $525^{\circ}C$ and $550^{\circ}C$. From these results, we can conclude that the optimum annealing temperature is around $550^{\circ}C$ under condition of there being no X-layer creation.

• 대한화학회지
• /
• 제55권3호
• /
• pp.364-372
• /
• 2011

다양한 억제제의 농도, 온도, 유속에서 중량 분석과 변전위 분극법을 이용하여 0.25 M 황산 용액상에 있는 연강철에 대한 imatinib mesylate (IMT)의 부식 억제를 연구하였다. 억제제의 농도가 증가함에 따라 억제 효과가 증가한다는 결과를 얻었다. 연강철 표면 위의 흡착 과정은 Langmuir 흡착 등온선을 따른다. 얻어진 흡착 깁스 자유 에너지의 값은 연강철 위의 IMT의 흡착 과정이 화학흡착이라는 것을 보여준다. 열역학 변수들이 계산되고, 논의되었다. IMT의 HOMO와 LUMO의 전자궤도 밀도 분포는 억제 메커니즘을 논의하는데 이용되었다. FT-IR 분광학과 SEM 이미지는 필름에 흡착된 표면을 분석하기 위해 사용되었다.

• 한국임상수의학회지
• /
• 제16권1호
• /
• pp.1-7
• /
• 1999

The purpose of the present study was to evaluate the easiness of suture and fixation of modified total ring prostheses (m-TRP). Twelve healthy dogs (B.W.2-10 kg) were randomly assigned to three groups. In group A (3 dogs), total ring prostheses was fixed by penetrating a suture material through tracheal mucosa. In group B (3 dogs), TRP was fixed by suturing on tracheal cartilage and muscular layer not penetrating through tracheal mucosa. m-TRP was applied to the cervical portions (group M-C,3 dogs), and thoracic portions (group M-T,3 dogs). Operating time of group M-C (37.33$\pm$6.80 min.) was shorter than those of groups B (83.33$\pm$8.50 min.) and A (63.33$\pm$11.06 min.) (p＜0.01). Clinical complications were minimal and limited to mild, short-term hematoma, vomiting, edema, and inflammation. Coughing remarkably decreased in group B rather than group A. Dyspnea was not showed in group A, B, and M-C, but group M-T had a mild dyspnea. Gross postmortem findings were similar in all groups. Mild adhesions were present between prostheses and adjacent structures, but tracheal lumen was clean. Severe adhesions were present where m-TRP had been applied in the thoracic portions. Histopathologic abnormalities included mild to moderate adventitial and periprosthetic fibrosis and mild adventitial inflammation. The present study indicated that m-TRP were easier in suture and fixation than TRP and had no differences in support for trachea and side effects.

• Journal of Welding and Joining
• /
• 제14권1호
• /
• pp.68-74
• /
• 1996

The microstructure of HAZ and the mechanical properties in weldments such as hardness and toughness were studied for mild steel and AH36 grade TMCP steel, as increasing heat input with electrogas welding process. The results of this study can be summarized as follow: 1) In the HAZ of mild steel, the width of coarse grained zone was larger than that of the nomalized zone, however in the case of TMCP steel, the nomalized zone was wider than the coarse grained zone. 2) The grain size of HAZ become coarse with increasing heat input. And at the same heat input, the grain size of TMCP steel was more coarser than that of mild steel. 3) According to the change of heat input, the deviation of hardness values was not significant, and the maximum values of hardness was not in HAZ but in the weld metal. And the hardness values in root part was higher than in face part. 4) Even though the HAZ grain size of mild steel was larger than that of TMCP steel, the impact values for mild steel was higher than those for TMCP steel, and the impact values in face part was higher than those in root part.

• 한국보건간호학회지
• /
• 제30권2호
• /
• pp.259-273
• /
• 2016

Purpose: The purpose of this study was to explore the barriers and solution of providing long-term care (LTC) services at home for the beneficiaries with mild dementia. Methods: The data were collected by interviewing three focus groups consisting of 10 home-visit nurses and analyzed through the analytic process by Morgan and Krueger. Results: The barriers of providing LTC services for clients were identified as follows: inadequateness of the current LTC model for elderly individuals with mild dementia and inappropriateness of the personal environment for home care. The solutions for these barriers were suggested as follows: building up a safe environment for home care and maintaining an appropriate standard utilization plan of LTC service. Conclusion: The current service model for the beneficiaries with mild dementia should be modified in order to provide comprehensive long-term care services based on their complex needs.

• Ocean Systems Engineering
• /
• 제6권2호
• /
• pp.161-189
• /
• 2016

This paper provides a practical stochastic method by which the maximum equilibrium scour depth around a vertical pile exposed to random waves plus a current on mild slopes can be derived. The approach is based on assuming the waves to be a stationary narrow-band random process, adopting the Battjes and Groenendijk (2000) wave height distribution for mild slopes including the effect of breaking waves, and using the empirical formulas for the scour depth on the horizontal seabed by Sumer and Fredsøe (2002). The present approach is valid for wave-dominant flow conditions. Results for random waves alone and random wave plus currents have been presented and discussed by varying the seabed slope and water depth. An approximate method is also proposed, and comparisons are made with the present stochastic method. For random waves alone it appears that the approximate method can replace the stochastic method, whereas the stochastic method is required for random waves plus currents. Tentative approaches to related random wave-induced scour cases on mild slopes are also suggested.

• 지역사회간호학회지
• /
• 제30권4호
• /
• pp.550-559
• /
• 2019

Purpose: The purpose of this study was to verify the effects of the integrated dementia managing programme for the elderly with mild dementia in which the physiological, cognitive, emotional, sociological and spiritual aspects have considered. Methods: This study employed non-equivalent control group pre-post tests with the repeated measure design. The subjects of the study were 39 elderly with mild dementia (20 in the experimental group and 19 in the control group) who have admitted to two nursing homes in B city. The data were analyzed by repeated measures ANOVA. Results: There were significant interactions between two groups and times in self-efficacy (p=.011), cognitive function (p<.001), depression (p=.005), spiritual well-being (p=.002), and quality of life (p=.037). The integrated dementia managing programme of this study showed significant positive effects on the quality of life for the elderly with mild dementia. Conclusion: On considering the current trends of aging and increasing number of the elderly with dementia, this integrated programme would be highly recommended to be used in nursing homes for the elderly with mild dementia, and contribute to improving their quality of life, and saving the social and medical expenses as well.

• 한국임상약학회지
• /
• 제10권3호
• /
• pp.120-124
• /
• 2000

Diltiazem inhibits calcium channels and leads to vascular smooth muscle relaxation and negative inotroic and chronotropic effects in the heart. Diltiazem (DTZ) is almost completely absorbed after oral administration, but its bioavailability is reduced because of considerable hepatic first-pass metabolism. The main metabolite of DTZ is deacetyldiltiazem. The purpose of this study was to report the pharmacokinetic changes of DTZ and its metabolite, deacetyldiltiazem (DAD) after intravenous administration of diltiazem to control rabbits and rabbits with mild and medium folate-induced renal failure (FIRRs). The area under the plasma concentration-time curves (AUC) of DTZ were significantly increased in mild and medium FIRRs. The metabolite ratio of the DAD to DTZ were significantly decreased in mild and medium FIRRs. The elimination rate constant $(\beta)$ and total body clearances (CLt) of DTZ were significantly decreased in mild and medium FIRRS. These findings suggest that the hepatic metabolism of diltiazem was inhibited and CLt and ${\beta}$ of DTZ were significantly decreased in mild and in rabbits with medium folate-induced renal failure.

• 한국멀티미디어학회논문지
• /
• 제20권2호
• /
• pp.115-125
• /
• 2017

For many stroke patients undergoing rehabilitation therapy, there is a need for indicator for evaluating the body function in paretic and non-paretic regions of stroke patients quantitatively. In this paper, the function of muscles and cells in paretic and non-paretic regions of severe and mild hemiplegic stroke patients was evaluated using multi-channel bioelectrical impedance spectroscopy. The paretic and non-paretic regions of severe and mild stroke patients were quantitatively assessed by using bioelectrical impedance parameters such as prediction marker (PM), phase angle (${\theta}$), characteristic frequency ($f_c$), and bioelectrical impedance vector analysis (BIVA). The mean values of impedance vector were significantly discriminated in all comparisons (severe-paretic, severe-non-paretic, mild-paretic, and mild-non-paretic). The bioelectrical impedance parameters were proved to be a very valuable tool for quantitatively evaluating the paretic and non-paretic regions of hemiplegic stroke patients.