• 전기전자학회논문지
• /
• 제26권2호
• /
• pp.287-291
• /
• 2022

일반적으로 V2X 통신은 차량의 고속이동에 따라 물리계층 채널 임펄스 응답의 진폭과 위상정보가 시간 및 주파수에서 빠르게 변화하기 때문에, 수신단에서 이러한 채널을 정확하게 추정하는 것이 매우 어려운 일이다. 이러한 문제를 효과적으로 극복하기 위해 최근 패킷 내부에 주기적으로 미드앰블을 삽입하는 미드앰블 기반 채널추정 방식이 고려되고 있다. 하지만 단순히 미드앰블을 삽입하는 방법은 미드앰블의 수가 증가할수록 성능 이득 대비 주파수 효율이 빠르게 감소하는 문제점을 가지고 있다. 본 논문에서는 이러한 문제점을 해결하기 위해 기존의 데이터 파일럿 기반 채널추정방법과 미드앰블 방법을 결합한 새로운 양방향 평균화 채널추정기법을 제안한다. 제안하는 기법은 이러한 평균화 과정과 미드앰블의 위치 최적화를 통해 보다 적은 수의 미드앰블로 채널 추정의 정확도를 비약적으로 향상시킬 수 있다. 마지막으로 미드앰블의 수에 따른 패킷오류율 시뮬레이션을 통해 주파수 효율 관점에서 제안하는 기법의 우수성을 입증한다.

• 한국재료학회지
• /
• 제29권8호
• /
• pp.463-468
• /
• 2019

The electrical and interfacial properties of $HfO_2/Al_2O_3$ and $Al_2O_3/HfO_2$ dielectrics on AlN/p-Ge interface prepared by thermal atomic layer deposition are investigated by capacitance-voltage(C-V) and current-voltage(I-V) measurements. In the C-V measurements, humps related to mid-gap states are observed when the ac frequency is below 100 kHz, revealing lower mid-gap states for the $HfO_2/Al_2O_3$ sample. Higher frequency dispersion in the inversion region is observed for the $Al_2O_3/HfO_2$ sample, indicating the presence of slow interface states A higher interface trap density calculated from the high-low frequency method is observed for the $Al_2O_3/HfO_2$ sample. The parallel conductance method, applied to the accumulation region, shows border traps at 0.3~0.32 eV for the $Al_2O_3/HfO_2$ sample, which are not observed for the $Al_2O_3/HfO_2$ sample. I-V measurements show a reduction of leakage current of about three orders of magnitude for the $HfO_2/Al_2O_3$ sample. Using the Fowler-Nordheim emission, the barrier height is calculated and found to be about 1.08 eV for the $HfO_2/Al_2O_3$ sample. Based on these results, it is suggested that $HfO_2/Al_2O_3$ is a better dielectric stack than $Al_2O_3/HfO_2$ on AlN/p-Ge interface.

• KIEAE Journal
• /
• 제1권2호
• /
• pp.47-54
• /
• 2001

Single sound absorbers such as porous materials, panels, and Helmholts resonators have limited performance with some extents of frequency region. For example, porous materials do not attenuate low frequency sounds, while panels do not absorb high frequency sounds. Composite absorption structure with coverings, porous materials, and air gaps are an alternative for wide band sound absorption. Slits, panels, perforated panels are those materials for coverings, glass wool, mineral wool, polyester, and polyurethane are frequently used porous materials. Air gap between the porous material and background surface is one of major factors which governs the absorption characteristics of composite absorption structures, especially in the low frequency area. Calculations and measurements show that the absorption coefficients of composite absorption structure, in mid and low frequency bands, are getting higher with increased air gaps. Perforated panels rather than slits and panels are good coverings with higher number as far as absorption coefficient is concerned. Perforated panels with porous materials and 37 cm of air gaps in background have high absorption coefficients for all frequency bands, above 0.7 to 1.0. All measurements are performed in reverberation chamber, Mokpo National University, according to ISO 354 and ISO 3382.

• 국제초고층학회논문집
• /
• 제1권4호
• /
• pp.311-332
• /
• 2012

Earthquake response of mid-rise to high-rise buildings provided with friction dampers is investigated. The steel buildings are modelled as shear-type structures and the investigation involved modelling of the structures of varying heights ranging from five storeys to twenty storeys, in steps of five storeys, subjected to real earthquake ground motions. Three basic types of structures considered in the study are: moment resisting frame (MRF), braced frame (BF), and friction damper frame (FDF). Mathematical modelling of the friction dampers involved simulation of the two distinct phases namely, the stick phase and the slip phase. Dynamic time history analyses are carried out to study the variation of the top floor acceleration, top floor displacement, storey shear, and base-shear. Further, energy plots are obtained to investigate the energy dissipation by the friction dampers. It is seen that substantial earthquake response reduction is achieved with the provision of the friction dampers in the mid-rise and high-rise buildings. The provision of the friction dampers always reduces the base-shear. It is also seen from the fast Fourier transform (FFT) of the top floor acceleration that there is substantial reduction in the peak response; however, the higher frequency content in the response has increased. For the structures considered, the top floor displacements are lesser in the FDF than in the MRF; however, the top floor displacements are marginally larger in the FDF than in the BF.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2006년도 춘계 학술대회 발표논문집
• /
• pp.131-134
• /
• 2006

The narrowband speech over the telephone network is lacking in the information from low-band (0-300 Hz) and high-band (3400-8000 Hz) that are found in wideband speech (0-8000 Hz). As a result, narrowband speech is characterized by the reduced intelligibility and muffled quality, and degraded speaker identification. Spectral folding is the easiest way to reconstruct the missing high-band; however, the reconstructed speech still brings the sense of band-limited characteristic because of the absence of low-band and mid-band frequency components. To compensate for the lack of the extended speech, we propose to combine the spectral folding method and GMM transformation method, which is a statistical method to reconstruct wideband speech. The reconstructed wideband speech showed that the absent frequency components was filled up with relatively low spectral mismatch. According to the subjective speech quality evaluations, the proposed method was preferred to other methods.

• The Journal of the Acoustical Society of Korea
• /
• 제21권1E호
• /
• pp.12-17
• /
• 2002

Two improvements are discussed in measurement of the complex Young's modulus of the acoustic materials by using the transfer function method. It is found that the accelerometer misalignment might result in the severe measurement error, particularly in high frequency range. The supporting structure is modified to attach the upper and lower accelerometers along the vertical axis. Secondly, the method fur solving the equation associated with wave model is described. The solution of the lumped mass-spring model is chosen as the starting value for low frequency range, while in the mid and high frequency, the solution to the previous frequency step is used as the initial values. Measurements are done for hard and soft rubber specimens. It is shown that the erroneous peaks in the transfer function, due to the measurement error, cause highly incorrect Young's modulus and loss factors.

• The Journal of the Acoustical Society of Korea
• /
• 제21권2E호
• /
• pp.81-90
• /
• 2002

Single absorbing materials and Helmholtz resonators have limited absorption characteristics over limited frequency ranges due to their structures and properties. Porous materials are highly absorptive for mid and high frequency ranges, while they have little sound absorption for low frequency sounds. Helmholtz resonators are generally used to absorb sound energy for a specified frequency range. Hence they have limited capability in controlling the overall acoustic properties of a space. Not much has been known about useful finishing materials which have enough rigidity and absorption over broad frequency range, in spite of wide demands from acoustic designers and consultants. The present work measured and analyzed absorption characteristics of a slit absorber by varying surface materials, depths of air gap, dimensions of slat and slit widths. It was found that the narrower the slit width, the larger the absorptions over the wide frequency ranges and the pattern was dependent on the presence of porous material. Narrower slat's width tend to increase the slit absorber's absorption more or less. Absorption coefficients at low frequency ranges were dramatically improved (from 0.23 to 0.56) by increasing air gap when porous materials were present.

• The International Journal of Costume Culture
• /
• 제4권1호
• /
• pp.44-60
• /
• 2001

The purpose of this study is to present suggestions to improve the problems the domestic department stores face by analyzing and comparing the status of the development of PB which is absolutely critical for the specialized domestic department stores to survive, and to search for the future course which may lead to boosting sales and profit by developing the strategic PB products. Selected for this study were atotal of 20 PB's out of domestic as well s foreign PB's in the 4 big department stores. The data were analyzed with SAS package employed as per the by items frequency, percent, mean and standard deviation. From the above study, following viewpoints can be taken into account for the future development of PB ; First, the active will of the excutive is basically necessary for successful development of PB, by relying on long-term investment. Second, the existing mid or low-price goods should be in line with the mid or high price one's development for domestic merchandising with focus on middle or high class society. Third, the stock burden, biggest problem of PB, can be solved by discount policy at optimum prices and success rate of merchandising prediction.

• 한국물환경학회지
• /
• 제36권5호
• /
• pp.392-404
• /
• 2020

The focus of this study was to quantify the thermal stratification and analyze the relationship between the stratification structure and the tributaries to understand flow variations in the Paldang Reservoir. The vertical distribution of the temperature and density gradients, and the depth and thickness of the thermocline were quantitatively calculated using a lake physics tool (rLakeAnalyzer) and high-frequency monitoring data. Based on a density gradient of 0.2 kg/㎥/m, the thermocline was formed from mid-May to early-September 2019 and the other periods were weakly stratified or mixed. The thickness of the thermocline was developed until 4.7 m and the depth of the thermocline was formed at a depth of 3 - 6 m at the front of the Paldang Reservoir. During the formation of the thermocline, the Namhangang and Gyeongancheon tributaries with relatively high water temperature (low-density) flowed into the upper layer of the reservoir, and the Bukhangang tributary with low water temperature (high-density) mainly affected the lower layer of the reservoir. This is because the density currents were formed due to the difference in the water temperature of the tributaries. The findings of this study may be used for constructing high-frequency monitoring and quantitative data analyses of reservoirs.

• 한국식생활문화학회지
• /
• 제11권5호
• /
• pp.663-671
• /
• 1996

The purpose of this study was to compare high-school students importance and performance toward restaurant service attributes for the marketing strategy development. Specific objectives were to: a) investigate restaurant patronage characteristics of high school students; b) identify the difference of patronage behavior among three types of restaurants; and c) analyze the importance and performance among three types of restaurants. A questionnaire was developed and hand-delivered to 400 students enrolled 9th grade in 4 different high schools in Seoul. A total of 320 students (80%) was responded to this study. The questionnaire was composed of two parts with 47 restaurant service attribute statements. Results of this study were as follows: 1. A total of 57% was female and 61% of respondents spent less than ￦5,000 per week on eating out. 2. The frequency of visiting the low-priced restaurant was 8.9 times per week. 3. Reasons for being a patronage to low- (${\geq}$￦2,000) and mid-priced ( <￦2,000 and ${\geq}$￦5,000) restaurants were hunger, appointment, and seeking favorites with freinds but the reason for high-priced (<￦5,000) restaurants was celebrating special days with parents. 4. The main source of information for selecting restaurants was family and friends, T.V. advertising, and bulletin board. 5. For the low-priced restaurants, food, hygiene, price, and location were rated as important; location, price, menu, and food were rated as satisfied. 6. For the mid-priced restaurants, hygiene, food, price, and menu were rated as important; food, hygiene, service, and menu were rated as satisfied. 7. For the high-priced restaurants, hygiene, food, and atmosphere were rated as important; food, hygiene, atmosphere, and menu were as satisfied. 8. According to paired t-test, the score gap between importance and performance was the highest in the hygiene attribute; differences were high with the low-priced and low with high-priced restaurants.