• Fashion & Textile Research Journal
• /
• v.18 no.5
• /
• pp.716-723
• /
• 2016

The purpose of this study was to investigate the change in blood velocity(mm/sec) when compression and/or heat were applied to the knee joint for the elderly who has both normal and painful legs with osteoarthritis(OA). Experimental compression knee band was prepared from the 3D knee data of the average women in 60's. 3D replica of knee was reduced by 7, 10, and 13% from the nude pattern in course direction. Clothing pressure was measured at the front and back of each healthy and painful knee of elderly women for one minute while standing and sitting on the chair. Blood velocity was measured at 13 cm upper from the mid-patella for 15 minutes. Results are as follows: first, compression or heating treatment itself did not change blood velocity of both legs; second, combination treatment with heating and compression was effective to increase blood velocity. In details, for healthy legs, combination treatments with compression by 10% reduced pattern(about 1.3kPa) and heating($43^{\circ}C$) induced the maximal blood velocity, however, for knees with OA, 7% reduced pattern(about 1.0kPa) with simultaneous heating($43^{\circ}C$) was more effective than other cases. These results indicated that pain and spasticity of knee joint with OA could be reduced by applying heat and compression therapy, where the compression level of painful knee should be slightly lower than of healthy leg.

• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.55-65
• /
• 2002

The eighteenth century in Great Britain was the period of transformation, Great Britain externally experienced several wars intermittently mid internally transformed into the industrial country in the course of the 18th century. British shipowners were faced with short of seamen mainly due to several wars and expansion of shipping tonnage British shipowners tried to solve the mooing problem by decreasing the number of seamen from 22-23 sailors per ship of 100 tonnage in 1710's to 5 in 1810 and increasing seamen's wage from shillings per common seaman per month in the 17th century to 25 shillings in the middle of the 18th century and equation omitted during the French Revolutionary and Napoleonic Wars. What caused and resulted by specialized shipowners to cope with changeable market situation with flexibility was decrease of the number of seamen per ship and increase of wage.

• The Journal of Korean Medical History
• /
• v.19 no.2
• /
• pp.3-18
• /
• 2006

Bodongbiyo is an old medical book, which can be traced by its texts quoted in the pediatric part of Euibangryuchui. A notable fact is that its record does not remain in China, and relevant records are found only in Korea. The book is believed to have been widely used until the early Chosun Dynasty. The present study purposed to examine how records on Bodongbiyo have been handed down until today and to answer questions on the author of the book through investigating the quoted texts. In addition, we tried to get a glimpse of early pediatrics remaining in the book. From this study were drawn conclusions as follows. A. The oldest record about Bodongbiyo is found in the history of King Taejong in Joseonwangjosilrok, and its contents remain in the form of quotations in Hyangyakjipseongbang and Euibangryuchui. The fact that there are several records on Bodongbiyo, which cannot be traced in Chinese literature, means that the categories of medicine were so extensive in those days. Moreover, this proves the existence of pediatrics as a special medical area in the early Chosun Dynasty. B. Bodongbiyo is known to have been written by Yoo Wan-so, but there are some questions and, in fact, its contents including the theory of fever are contradictory to Yoo Wan-so's medical theory. A number of books that have been published recently in China under the title Bodongbiyo contain the original commentaries of Euibangryuchui and the contents of Yoo Wan-so's other books. They are likely to throw confusion into future researches. C. Bodongbiyo is believed to have been read widely in the Koryo Dynasty and the early Chosun Dynasty. Through examining its texts, we found that the book takes a different course from Soayakjeungjikgyeol. This provides a lead to the understanding of pediatrics in the early Chosun as well as to further research on pediatrics in the mid Chosun Dynasty represented by Dongeuibogam.

• Health Policy and Management
• /
• v.28 no.3
• /
• pp.294-300
• /
• 2018

The development and management of epidemiology intelligence service (EIS) officer with more specialized competence to cope with and prepare for health threats, including pandemic of emerging and re-emerging infectious diseases, is a high priority policy issue in Korea. First of all, we need to establish the training goal of EIS officer. It is necessary to establish manpower training and management system with at least three tiers including quantitative and qualitative targets. Second, at least 50% of all EIS officer must secure a physician and secure expertise and competence for epidemic. Third, for the ultimate purpose of EIS officer, the establishment of a public health expert should expand the scope of epidemiologist's work to health and medical care, occupational environment, and various disasters. Fourth, it is essential to expand the epidemiologist training and education program to the level of advanced countries. Especially, the training course should be expanded at least twice of current times. Fifth, it is necessary to independently install and operate the 'EIS Officer Training Center' as a mid- and long-term goal. Stewardship and governance are secured with the organization, personnel, etc. that can fully manage the planning, management, and evaluation of the EIS system. In the future, it will be necessary to establish a systematic and phased operational base of education and training programs for EIS officer, and establish a sustainable implementation system for strategy development. In addition, it is urgent to revise the guidelines for training public health professionals and strengthening competencies, and for establishing professional educational institutions.

• Journal of the Korean School Mathematics Society
• /
• v.7 no.1
• /
• pp.49-69
• /
• 2004

The purpose of this study was to develop learning materials for the remedial curriculum, part of the 7th sequential differentiated math curricula, in an effort to fix the academic deficiencies of underachieving students, provide motivation to them and enhance their self-directed learning capabilities. The subjects in this study were the students in their second year of C middle school, who were in want of remedial education. After their mid-term and finals grades in the first semester of 2003 were analyzed to measure their academic deficiencies, remedial learning materials about math 8-A stage were developed, by modifying the textbook and existing materials, in consideration of 7-A stage. After they were utilized in remedial class, frequency analysis was conducted to find out what the students thought of the developed learning materials, and diagnosis evaluation was implemented to find out how many students passed the test, improve the materials, and suggest in which way their achievement could get better.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.1
• /
• pp.17-23
• /
• 2020

Upper stage of launch vehicle mainly injects a lunar explorer from low earth orbit to the moon at a distance of 380,000 km. In foreign lunar explorer, the upper stage is separated from the explorer after the explorer is injected into the earth-moon transfer trajectory, and the lunar explorer then uses on-board propellant to carry out mid-course correction maneuvers and lunar orbit insertion maneuvers. This study describes a newly presented small liquid upper stage. Using a small liquid upper stage with a wet mass of 2.9 tonnes, the lunar explorer not only can be injected earth-moon transfer trajectory but also can be performed lunar orbit insertion. This study provides acceptable mass range of the lunar explorer and the scope of acceptable mission range also describes based on the launch from Naro Space Center.

• Journal of Astronomy and Space Sciences
• /
• v.33 no.4
• /
• pp.323-333
• /
• 2016

In this study, the uncertainty requirements for orbit, attitude, and burn performance were estimated and analyzed for the execution of the $1^{st}$ lunar orbit insertion (LOI) maneuver of the Korea Pathfinder Lunar Orbiter (KPLO) mission. During the early design phase of the system, associate analysis is an essential design factor as the $1^{st}$ LOI maneuver is the largest burn that utilizes the onboard propulsion system; the success of the lunar capture is directly affected by the performance achieved. For the analysis, the spacecraft is assumed to have already approached the periselene with a hyperbolic arrival trajectory around the moon. In addition, diverse arrival conditions and mission constraints were considered, such as varying periselene approach velocity, altitude, and orbital period of the capture orbit after execution of the $1^{st}$ LOI maneuver. The current analysis assumed an impulsive LOI maneuver, and two-body equations of motion were adapted to simplify the problem for a preliminary analysis. Monte Carlo simulations were performed for the statistical analysis to analyze diverse uncertainties that might arise at the moment when the maneuver is executed. As a result, three major requirements were analyzed and estimated for the early design phase. First, the minimum requirements were estimated for the burn performance to be captured around the moon. Second, the requirements for orbit, attitude, and maneuver burn performances were simultaneously estimated and analyzed to maintain the $1^{st}$ elliptical orbit achieved around the moon within the specified orbital period. Finally, the dispersion requirements on the B-plane aiming at target points to meet the target insertion goal were analyzed and can be utilized as reference target guidelines for a mid-course correction (MCC) maneuver during the transfer. More detailed system requirements for the KPLO mission, particularly for the spacecraft bus itself and for the flight dynamics subsystem at the ground control center, are expected to be prepared and established based on the current results, including a contingency trajectory design plan.

• Journal of the Korea Society for Simulation
• /
• v.24 no.3
• /
• pp.9-16
• /
• 2015

This research focuses on analysis of the flight trajectory characteristics of SLBM (Submarine Launched Ballistic Missile) of North Korea. Recently, North Korea tested launching of SLBM which is threatening international security. Also it is known that North Korea had possessed the technologies about SLBM since they disassembled submarines out of commission of the former Soviet Union. If the development of the SLBM of North Korea is completed, it should be affected as asymmetric threat to South Korea. Therefore, for active respondence to these threat, it is essential to analyze the SLBM systematically. In this point of view, this work made a SLBM flight model and simulated. In addition, we controled flight trajectories according to adjusting loft angle and described their characteristics. The sea-based ballistic missile defense system is required for an effective response to the flight trajectory of the SLBM from mid-course to terminal phase.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.2
• /
• pp.182-194
• /
• 2022

Objectives: This study evaluates and recommends the priority of policy implementation to improve the fire protection clothing management system used by firefighters and the reduction of cross-contamination from contaminated clothing at the scene of a fire. Methods: It consisted of 7 experts and conducted three interviews and two modified Delphi surveys. Through the results of previous research and interviews with experts, a plan to reduce cross-contamination of fire suits and improve the management system was first derived. An improvement plan was presented in the four areas including resources, management, fire protection related work, and laws and regulations, and the priority of policy implementation was derived by analyzing the importance and practicality of the policy at the same time. Results: As a result of the analysis, the first priority was education on the health effects of pollutants at the disaster scene for firefighters, and the second priority was the addition of SOP for the primary decontamination of on-scene personal protective equipment in preparation for the health effects of the disaster scene, and education for fire suppression and rescue workers. The next step was to improve the management system of personal protective equipment such as fire suits and develop a training course for systematic operation. Conclusions: This findings could be used in the implementation of mid- to long-term firefighting policies for the systematic operation and establishment of a systematic management system for personal protective equipment such as fire protective suits.

• Journal of Practical Engineering Education
• /
• v.14 no.1
• /
• pp.137-147
• /
• 2022

Universities should provide experiential learning in subject and non-course subjects so that students can graduate with job competency related to their major and the experiential learning includes capstone design implemented on campus and field training conducted by companies. In particular, the decrease in industry participation in short-term (4 weeks) and mid-term field training (8 weeks) due to the implementation of standard field training introduced from the second half of 2021 is making it more difficult for students to gain practical experience. To solve this problem, in this paper, we propose an industry-participatory capstone design & field practice linkage model that combines capstone design and professional practice to solve the technical difficulties of companies. Participating students find solutions to corporate difficulties in the capstone design process and produce prototypes for solutions during the field practice period, focusing on the case of the department of electronic engineering at Gyeongbuk Y University. We believe that it is one of the good models of industry-university cooperation education in which universities and industries win-win.