• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.23-27
• /
• 2009

The joint dispatch of regional electricity markets can improve the overall economic efficiency of interconnected markets by increasing the combined social welfare of the interconnected markets. This paper presents a new decentralized optimization technique based on Augmented Lagrangian Relaxation (ALR) to perform the joint dispatch of interconnected electricity markets. The Block Coordinate Descent (BCD) technique is applied to decompose the inseparable quadratic term of the augmented Lagrangian equation into individual market optimization problems. The Interior Point/Cutting Plane (IP/CP) method is used to update the Lagrangian multiplier in the decomposed market optimization problem. The numerical example is presented to validate the effectiveness of the proposed decentralized method.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.10a
• /
• pp.371-374
• /
• 2004

The ultimate purpose of Supply Chain Management (SCM) is maximizing the profits of the overall Supply Chain (SC) through increasing customer satisfaction and decreasing operating cost. It can be successfully accomplished only when SC system balances demands with supply activities coordinated by aggregate planning, mid-term level of Supply Chain Planning(SCP). However, the existing measures to mainly estimate the specific function of SCM are not enough to evaluate the state of SC with respect to the balance between supply and demand in operating. To solve this problem, we develop a new SC performance measure, Balancing Point, using momentum concept. a fundamental knowledge of physics. Momentum concept can explain the relation among objects so that it can consider the balance between supply and demand in SC operating. The developed measure can not only consider the current state of the SC system but also take planned but not executed supply activities and upcoming demands into account. Therefore, using Balancing point, we can be aware of the unbalanced state of SC in advance.

• Journal of Power Electronics
• /
• v.9 no.1
• /
• pp.43-50
• /
• 2009

This paper deals with a novel solid state controller (NSSC) for an isolated asynchronous generator (IAG) feeding 3-phase 4-wire loads driven by constant power prime movers, such as uncontrolled pico hydro turbines. AC capacitor banks are used to meet the reactive power requirement of the asynchronous generator. The proposed NSSC is realized using a set of IGBTs (Insulated gate bipolar junction transistors) based current controlled 2-leg voltage source converters (CC- VSC) and a DC chopper at its DC bus, which keeps the generated voltage and frequency constant in spite of changes in consumer loads. The neutral point of the load is created using aT-configuration of the transformers. The IAG system is modeled in MATLAB along with Simulink and PSB (power system block set) toolboxes. The simulated results are presented to demonstrate the capability of the isolated generating system consisting of NSSC and IAG driven by uncontrolled pico hydro turbine and feeding 3-phase 4-wire loads.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2428-2435
• /
• 2014

Numerical analysis with ALE (Arbitrary Lagrangian Eulerian) Adaptive Meshing technique was performed to evaluate the pullout capacity of the embedded suction anchors (ESA) in uniform clay. The numerical method was verified by the previous study, analytical results based on limit-equilibrium theory and centrifuge tests. The pullout capacity of the ESA under horizontal, vertical, and inclined loading were evaluated, and the effect of initial rotation of the ESA on pullout capacity was also investigated. The analysis results showed that the maximum horizontal capacity was obtained at the mid-point, and the each vertical capacity gave the similar value regardless of the loading points. Furthermore, the inclined capacity was decreased as the load inclination angle increased at the mid-point of the anchor, and almost the same pullout capacity was obtained when the initial rotation angles were below 30 degrees.

• Physical Therapy Rehabilitation Science
• /
• v.2 no.2
• /
• pp.92-98
• /
• 2013

Objective: Constraint induced aphasia therapy (CIAT) is a more intensive form of language treatment for aphasia as compared to traditional treatments. This study examined whether there are differences in cortisol stress levels between the two methods of aphasia treatment as well as effects on language skills. Design: Randomized controlled trial. Methods: A total of 20 participants with expressive aphasia were randomly placed into one of the two treatment groups. The CIAT group received 10 days of intensive treatment over two weeks. The traditional therapy group received 6 days of treatment over 2 weeks. All participants in each group provided salivary cortisol samples before treatment, at the mid-point of treatment, and at the conclusion of treatment. Language skills were assessed before treatment and at the conclusion of treatment. Results: A significantly higher proportion of individuals in the CIAT treatment group had increased salivary cortisol stress levels when compared to the traditional treatment group at the mid-point of the program (80% versus 30% respectively, p<0.05). There was no significant difference in the proportion of individuals with increased cortisol stress by the end of the treatment. Language scores for word repetition and overall aphasia quotient significantly improved for the CIAT group when compared to the traditional group (p<0.05). Conclusions: The CIAT treatment appears to initially create increased psychophysiological stress as compared to the traditional treatment. In spite of the initial increases in psychophysiological stress, participants appear to become conditioned to the challenge and ultimately have enhanced benefit from CIAT treatment.

• Phonetics and Speech Sciences
• /
• v.8 no.4
• /
• pp.39-47
• /
• 2016

While acoustic studies in the past decade documented a raised /o/ by showing their lowered first formants (F1) almost overlapped with those of high back vowel /u/, no consensus has been made in terms of how this /o/-raising affects the vowels as a system in Seoul Korean. The current study aimed to investigate the age- and gender-related differences of the relative distance among the vowels to better understand the influence of this on-going sound change on the vowel system. We measured the static and dynamic spectral characteristics (F1 and F2) of the seven Korean monophthong vowels /e a ʌ o u ɨ i/ in the spontaneous speech of Seoul Corpus, and depicted the patterns of 30 individual speakers (10 speakers in each group of teens, 20s and 40s) as a function of age and gender. The static spectral examination showed low F1 values of /o/ in the spontaneous speech corpus confirming the vowel /o/ raising, and also revealed greater F2 values of /u, ɨ/ suggesting their anterior articulations. The tendencies were stronger when the speakers were younger and female. The spectral trajectories further showed that the F1 and F2 between /o/ and /u/ were differentiated throughout the vowel mid-point although the trajectories gradually merged near the vowel mid point in the older male speakers' productions. The acoustic evidence of contrast among /o, u, ɨ/ supports that the raised /o/ is not indicative of a merger with /u/ but rather implying a chain-like vowel shift in the Seoul Korean.

• Archives of Plastic Surgery
• /
• v.33 no.6
• /
• pp.715-722
• /
• 2006

Purpose: The main advantages of the perforator flap are minimal donor site morbidity, preservation of any main source artery and its thin characteristics. Most perforator flaps for hand reconstruction need primary and secondary procedures such as a flap debulkiness and liposuction etc. However, flap thickness of calf area is thinner than any other perforator flaps. Methods: We performed an anatomical study and clinical application of medial sural artery perforator flap. We found that there are two or more medial sural perforators located on a straight line drawn from the mid-point of popliteal crease to the mid-point of medial malleolus. Most pathway of medial sural artery comes along with this line. It is possible to observe the first perforators almost exactly 8 cm from midpoint of popliteal crease in a distal half circle drawn with a radius of 2 cm. Results: We report 12 cases in 11 patients of hand reconstruction with medial sural perforator free flap from Febrary 2003 to Febrary 2006. Complete healing was possible in 11 cases. Total flap loss for venous insufficiency was in 1 patient. During the follow-up, good contour and full range of motion was observed on hand reconstruction with medial sural perforator free flap. Conclusion: In the authors' experience, this anatomical study made it possible to prepare a diagram of the exact location of the medial sural perforators. This flap can be used to achieve acceptable functional and aesthetic results for hand reconstruction because of its thin characteristics.

• Wind and Structures
• /
• v.30 no.6
• /
• pp.663-678
• /
• 2020

Robust semi-active vibration control of wind turbines using tuned mass dampers (TMDs) is a promising technique. This study investigates a 1.5 megawatt wind turbine controlled by eight different types of tuned mass damper systems of equal mass: a passive TMD, a semi-active varying-spring TMD, a semi-active varying-damper TMD, a semi-active varying-damper-and-spring TMD, as well as these four damper systems paired with an additional smaller passive TMD near the mid-point of the tower. The mechanism and controllers for each of these TMD systems are explained, such as employing magnetorheological dampers for the varying-damper TMD cases. The turbine is modelled as a lumped-mass 3D finite element model. The uncontrolled and controlled turbines are subjected to loading and operational cases including service wind loads on operational turbines, seismic loading with service wind on operational turbines, and high-intensity storm wind loads on parked turbines. The displacement and acceleration responses of the tower at the first and second mode shape maxima were used as the performance indicators. Ultimately, it was found that while all the semi-active TMD systems outperformed the passive systems, it was the semi-active varying-damper-and-spring system that was found to be the most effective overall - capable of controlling vibrations about as effectively with only half the mass as a passive TMD. It was also shown that by reducing the mass of the TMD and adding a second smaller TMD below, the vibrations near the mid-point could be greatly reduced at the cost of slightly increased vibrations at the tower top.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.8
• /
• pp.1-10
• /
• 2008

In this paper, we describe a design of a 128bit MRAM based on a new switching architecture which is Local Field Switching(LFS). LFS uses a local magnetic field generated by the current flowing through an MTJ. This mode reduces the writing current since small current can induce large magnetic field because of close distance between MTJ and the current. It also improves the cell selectivity over using conventional MTJ architecture because it doesn't need a digit line for writing. The MRAM has 1-Transistor 1-Magnetic Tunnel Junction (IT-1MTJ) memory cell structure and uses a bidirectional write driver, a mid-point reference cell block and a current mode sense amplifier. CMOS emulation cell is adopted as an LFS-MTJ cell to verify the operation of the circuit without the MTJ process. The memory circuit is fabricated using a $0.18{\mu}m$ CMOS technology with six layers o) metal and tested on custom board.

• International Journal of Fluid Machinery and Systems
• /
• v.10 no.3
• /
• pp.287-295
• /
• 2017

The most detrimental pressure pulsations in high-head pump-turbines is caused by the rotor-stator interaction (RSI) between the guide vanes and runner blades. When the pump-turbine operates in the S-shaped region of the characteristic curves, the deteriorative flow structures may significantly strengthen RSI, causing larger pressure pulsations and stronger vibration with an increased risk of mechanical failure. CFD simulations were carried out to analyze the impacts of flow evolution on the pressure pulsations in the S-shaped region of a model pump-turbine. The results show that the reverse flow vortex structures (RFVS) at the runner inlet have regular development and transition patterns when discharge reduces from the best efficiency point (BEP). The RFVS first occur at the hub side, and then shift to the mid-span near the no-load point, which cause the strongest pressure pulsations. The locally distributed RFVS at hub side enhance the local RSI and makes the pressure fluctuations at the corresponding sections stronger than those at the rest sections along the spanwise direction. Under the condition of RFVS at the mid-span, the smaller flow rate make the smaller difference of pressure pulsation amplitudes in the spanwise direction. Moreover, the rotating stall, rotating at 35.7%-62.5% of the runner rotational frequency, make the low frequency components of pressure pulsations distribute unevenly along the circumference in the vaneless space. However, it have little influence on the distributions of high components.