• 제목/요약/키워드: Mid Point

검색결과 609건 처리시간 0.034초

BCD 기반 분산처리 기법을 이용한 연계전력시장 최적화 (Block Coordinate Descent (BCD)-based Decentralized Method for Joint Dispatch of Regional Electricity Markets)

  • 문국현;주성관
    • 전기학회논문지
    • /
    • 제58권1호
    • /
    • pp.23-27
    • /
    • 2009
  • The joint dispatch of regional electricity markets can improve the overall economic efficiency of interconnected markets by increasing the combined social welfare of the interconnected markets. This paper presents a new decentralized optimization technique based on Augmented Lagrangian Relaxation (ALR) to perform the joint dispatch of interconnected electricity markets. The Block Coordinate Descent (BCD) technique is applied to decompose the inseparable quadratic term of the augmented Lagrangian equation into individual market optimization problems. The Interior Point/Cutting Plane (IP/CP) method is used to update the Lagrangian multiplier in the decomposed market optimization problem. The numerical example is presented to validate the effectiveness of the proposed decentralized method.

공급사슬 운영에서의 수요와 공급 균형에 관한 연구 (Balancing between Supply and Demand in Supply Chain Operating)

  • 조민관;이영해
    • 한국경영과학회:학술대회논문집
    • /
    • 한국경영과학회 2004년도 추계학술대회 및 정기총회
    • /
    • pp.371-374
    • /
    • 2004
  • The ultimate purpose of Supply Chain Management (SCM) is maximizing the profits of the overall Supply Chain (SC) through increasing customer satisfaction and decreasing operating cost. It can be successfully accomplished only when SC system balances demands with supply activities coordinated by aggregate planning, mid-term level of Supply Chain Planning(SCP). However, the existing measures to mainly estimate the specific function of SCM are not enough to evaluate the state of SC with respect to the balance between supply and demand in operating. To solve this problem, we develop a new SC performance measure, Balancing Point, using momentum concept. a fundamental knowledge of physics. Momentum concept can explain the relation among objects so that it can consider the balance between supply and demand in SC operating. The developed measure can not only consider the current state of the SC system but also take planned but not executed supply activities and upcoming demands into account. Therefore, using Balancing point, we can be aware of the unbalanced state of SC in advance.

  • PDF

H-Bridge VSC with a T-Connected Transformer for a 3-Phase 4- Wire Voltage and Frequency Controller of an Isolated Asynchronous Generator

  • Kasal, Gaurav Kumar;Singh, Bhim
    • Journal of Power Electronics
    • /
    • 제9권1호
    • /
    • pp.43-50
    • /
    • 2009
  • This paper deals with a novel solid state controller (NSSC) for an isolated asynchronous generator (IAG) feeding 3-phase 4-wire loads driven by constant power prime movers, such as uncontrolled pico hydro turbines. AC capacitor banks are used to meet the reactive power requirement of the asynchronous generator. The proposed NSSC is realized using a set of IGBTs (Insulated gate bipolar junction transistors) based current controlled 2-leg voltage source converters (CC- VSC) and a DC chopper at its DC bus, which keeps the generated voltage and frequency constant in spite of changes in consumer loads. The neutral point of the load is created using aT-configuration of the transformers. The IAG system is modeled in MATLAB along with Simulink and PSB (power system block set) toolboxes. The simulated results are presented to demonstrate the capability of the isolated generating system consisting of NSSC and IAG driven by uncontrolled pico hydro turbine and feeding 3-phase 4-wire loads.

ALE 기법이 적용된 수치해석을 통한 점토지반에서 석션 매입 앵커의 인발 저항력 평가 (Evaluation of Pullout Capacity of Embedded Suction Anchors in Uniform Clay using Numerical Analysis with ALE(Arbitrary Lagrangian Eulerian) Technique)

  • 나선홍;장인성;권오순;이승현
    • 한국산학기술학회논문지
    • /
    • 제15권4호
    • /
    • pp.2428-2435
    • /
    • 2014
  • 해상에 활용되는 계류앵커형식 중 한 종류인 석션 매입 앵커(Embedded Suction Anchor; ESA)의 점토지반에서 인발 저항력을 평가하기 위해 ALE(Arbitrary Lagrangian Eulerian) Adaptive Meshing기법을 적용한 수치해석을 수행하였다. 기존에 수행된 원심모형 실험과 한계 평형법을 이용한 해석적 방법의 결과와 비교 분석을 통해 수치해석 기법을 검증하고, 이를 이용해 앵커의 수평, 연직, 그리고 경사 방향의 인발 저항력을 평가하였다. 더불어 경사 방향의 재하 이전에 앵커를 경사각만큼 회전시켜 앵커에 수직한 방향으로 인발이 가해지도록 하여 그 거동을 평가하였다. 그 결과, 수평 재하 시 중간 위치에서 가장 큰 저항이 발휘되었고, 연직 재하의 경우 재하 위치에 따른 저항력의 차이가 크게 나타나지 않았다. 앵커의 중간 위치에서 경사 재하 결과 경사각이 증가할수록 인발 저항력이 감소하였으며, 초기회전이 있는 앵커의 경우 초기회전각이 30도 이하일 때 인발저항력이 일정한 결과를 보였다.

Stress and language recovery in individuals with aphasia: constraint induced aphasia therapy

  • Sharp, Brian;Shaughnessy, Paige;Berk, Lee;Daher, Noha
    • Physical Therapy Rehabilitation Science
    • /
    • 제2권2호
    • /
    • pp.92-98
    • /
    • 2013
  • Objective: Constraint induced aphasia therapy (CIAT) is a more intensive form of language treatment for aphasia as compared to traditional treatments. This study examined whether there are differences in cortisol stress levels between the two methods of aphasia treatment as well as effects on language skills. Design: Randomized controlled trial. Methods: A total of 20 participants with expressive aphasia were randomly placed into one of the two treatment groups. The CIAT group received 10 days of intensive treatment over two weeks. The traditional therapy group received 6 days of treatment over 2 weeks. All participants in each group provided salivary cortisol samples before treatment, at the mid-point of treatment, and at the conclusion of treatment. Language skills were assessed before treatment and at the conclusion of treatment. Results: A significantly higher proportion of individuals in the CIAT treatment group had increased salivary cortisol stress levels when compared to the traditional treatment group at the mid-point of the program (80% versus 30% respectively, p<0.05). There was no significant difference in the proportion of individuals with increased cortisol stress by the end of the treatment. Language scores for word repetition and overall aphasia quotient significantly improved for the CIAT group when compared to the traditional group (p<0.05). Conclusions: The CIAT treatment appears to initially create increased psychophysiological stress as compared to the traditional treatment. In spite of the initial increases in psychophysiological stress, participants appear to become conditioned to the challenge and ultimately have enhanced benefit from CIAT treatment.

서울 방언 단모음의 소리 변화와 음향 단서 연구: 단일지점 포먼트와 궤적 양상 (Static and dynamic spectral properties of the monophthong vowels in Seoul Korean: Implication on sound change)

  • 강지은;공은정
    • 말소리와 음성과학
    • /
    • 제8권4호
    • /
    • pp.39-47
    • /
    • 2016
  • While acoustic studies in the past decade documented a raised /o/ by showing their lowered first formants (F1) almost overlapped with those of high back vowel /u/, no consensus has been made in terms of how this /o/-raising affects the vowels as a system in Seoul Korean. The current study aimed to investigate the age- and gender-related differences of the relative distance among the vowels to better understand the influence of this on-going sound change on the vowel system. We measured the static and dynamic spectral characteristics (F1 and F2) of the seven Korean monophthong vowels /e a ʌ o u ɨ i/ in the spontaneous speech of Seoul Corpus, and depicted the patterns of 30 individual speakers (10 speakers in each group of teens, 20s and 40s) as a function of age and gender. The static spectral examination showed low F1 values of /o/ in the spontaneous speech corpus confirming the vowel /o/ raising, and also revealed greater F2 values of /u, ɨ/ suggesting their anterior articulations. The tendencies were stronger when the speakers were younger and female. The spectral trajectories further showed that the F1 and F2 between /o/ and /u/ were differentiated throughout the vowel mid-point although the trajectories gradually merged near the vowel mid point in the older male speakers' productions. The acoustic evidence of contrast among /o, u, ɨ/ supports that the raised /o/ is not indicative of a merger with /u/ but rather implying a chain-like vowel shift in the Seoul Korean.

내측 비복 천공지 유리피판을 이용한 수부재건 (Hand Reconstruction with Medial Sural Perforator Free Flap)

  • 류민희;김효헌
    • Archives of Plastic Surgery
    • /
    • 제33권6호
    • /
    • pp.715-722
    • /
    • 2006
  • Purpose: The main advantages of the perforator flap are minimal donor site morbidity, preservation of any main source artery and its thin characteristics. Most perforator flaps for hand reconstruction need primary and secondary procedures such as a flap debulkiness and liposuction etc. However, flap thickness of calf area is thinner than any other perforator flaps. Methods: We performed an anatomical study and clinical application of medial sural artery perforator flap. We found that there are two or more medial sural perforators located on a straight line drawn from the mid-point of popliteal crease to the mid-point of medial malleolus. Most pathway of medial sural artery comes along with this line. It is possible to observe the first perforators almost exactly 8 cm from midpoint of popliteal crease in a distal half circle drawn with a radius of 2 cm. Results: We report 12 cases in 11 patients of hand reconstruction with medial sural perforator free flap from Febrary 2003 to Febrary 2006. Complete healing was possible in 11 cases. Total flap loss for venous insufficiency was in 1 patient. During the follow-up, good contour and full range of motion was observed on hand reconstruction with medial sural perforator free flap. Conclusion: In the authors' experience, this anatomical study made it possible to prepare a diagram of the exact location of the medial sural perforators. This flap can be used to achieve acceptable functional and aesthetic results for hand reconstruction because of its thin characteristics.

Comparison of semi-active and passive tuned mass damper systems for vibration control of a wind turbine

  • Lalonde, Eric R.;Dai, Kaoshan;Bitsuamlak, Girma;Lu, Wensheng;Zhao, Zhi
    • Wind and Structures
    • /
    • 제30권6호
    • /
    • pp.663-678
    • /
    • 2020
  • Robust semi-active vibration control of wind turbines using tuned mass dampers (TMDs) is a promising technique. This study investigates a 1.5 megawatt wind turbine controlled by eight different types of tuned mass damper systems of equal mass: a passive TMD, a semi-active varying-spring TMD, a semi-active varying-damper TMD, a semi-active varying-damper-and-spring TMD, as well as these four damper systems paired with an additional smaller passive TMD near the mid-point of the tower. The mechanism and controllers for each of these TMD systems are explained, such as employing magnetorheological dampers for the varying-damper TMD cases. The turbine is modelled as a lumped-mass 3D finite element model. The uncontrolled and controlled turbines are subjected to loading and operational cases including service wind loads on operational turbines, seismic loading with service wind on operational turbines, and high-intensity storm wind loads on parked turbines. The displacement and acceleration responses of the tower at the first and second mode shape maxima were used as the performance indicators. Ultimately, it was found that while all the semi-active TMD systems outperformed the passive systems, it was the semi-active varying-damper-and-spring system that was found to be the most effective overall - capable of controlling vibrations about as effectively with only half the mass as a passive TMD. It was also shown that by reducing the mass of the TMD and adding a second smaller TMD below, the vibrations near the mid-point could be greatly reduced at the cost of slightly increased vibrations at the tower top.

Local Field Switching 방식의 MRAM 설계 (Design of Local Field Switching MRAM)

  • 이감영;이승연;이현주;이승준;신형순
    • 대한전자공학회논문지SD
    • /
    • 제45권8호
    • /
    • pp.1-10
    • /
    • 2008
  • 본 논문에서는 새로운 스위칭 방식인 LFS (Local Field Switching)을 이용하여 설계한 128비트 MRAM (Magnetoresistive Random Access Memo교)에 대해 기술하였다. LFS 방식은 MTJ (Magnetic Tunnel Junction)를 직접 통과해 흐르는 전류에 의해 형성되는 국소 자기장을 이용하여 MTJ의 극성을 변환시킨다. 이 방식은 MTJ와 전류의 거리가 가깝기 때문에 작은 전류로도 충분히 큰 자기장을 형성하므로 writing current가 적어도 된다. 또한 Digit Line이 없어도 되므로 half select disturbance가 발생하지 않아 기존 MTJ를 이용한 방식에 비해 셀 선택도가 우수하다. 설계한 MRAM은 IT(트랜지스터)-1MTJ의 메모리 셀 구조를 가지며 양방향 write driver와 mid-point reference cell block, current mode sense amplifier를 사용한다. 그리고 MTJ 공정 없이 회로 동작을 확인하기 위해 LFS-MTJ cell을 CMOS emulation cell로 대체하였다. 설계한 회로를 6 metal을 사용하는 $0.18{\mu}m$ CMOS 공정으로 구현하였고 제작된 chip을 custom board 상에서 테스트하여 동작을 확인하였다.

Pressure Pulsation Characteristics of a Model Pump-turbine Operating in the S-shaped Region: CFD Simulations

  • Xia, Linsheng;Cheng, Yongguang;Cai, Fang
    • International Journal of Fluid Machinery and Systems
    • /
    • 제10권3호
    • /
    • pp.287-295
    • /
    • 2017
  • The most detrimental pressure pulsations in high-head pump-turbines is caused by the rotor-stator interaction (RSI) between the guide vanes and runner blades. When the pump-turbine operates in the S-shaped region of the characteristic curves, the deteriorative flow structures may significantly strengthen RSI, causing larger pressure pulsations and stronger vibration with an increased risk of mechanical failure. CFD simulations were carried out to analyze the impacts of flow evolution on the pressure pulsations in the S-shaped region of a model pump-turbine. The results show that the reverse flow vortex structures (RFVS) at the runner inlet have regular development and transition patterns when discharge reduces from the best efficiency point (BEP). The RFVS first occur at the hub side, and then shift to the mid-span near the no-load point, which cause the strongest pressure pulsations. The locally distributed RFVS at hub side enhance the local RSI and makes the pressure fluctuations at the corresponding sections stronger than those at the rest sections along the spanwise direction. Under the condition of RFVS at the mid-span, the smaller flow rate make the smaller difference of pressure pulsation amplitudes in the spanwise direction. Moreover, the rotating stall, rotating at 35.7%-62.5% of the runner rotational frequency, make the low frequency components of pressure pulsations distribute unevenly along the circumference in the vaneless space. However, it have little influence on the distributions of high components.