• Journal of Electrochemical Science and Technology
• /
• 제12권3호
• /
• pp.297-301
• /
• 2021

Microbial fuel cells (MFCs) convert chemical energy to electrical energy via electrochemically active microorganisms. The interactions between microbes and the surface of a carbon electrode play a vital role in capturing the respiratory electrons from bacteria. Therefore, improvements in the electrochemical and physicochemical properties of carbon materials are essential for increasing performance. In this study, a microwave and sulfuric acid treatment was used to modify the surface structure of graphite granules. The prepared expandable graphite granules (EGG) exhibited a 1.5 times higher power density than the unmodified graphite granules (1400 vs. 900 mW/m³). Scanning electron microscopy and Fourier transform infrared spectroscopy revealed improved physical and chemical characteristics of the EGG surface. These results suggest that physical and chemical surface modification using sulfuric acid and microwave heating improves the performance of electrode-based bioprocesses, such as MFCs.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.158-158
• /
• 2015

Myoblast are myogenic precursors that proliferate, activate, and differentiate on muscle injury to sustain the regenerative capacity of skeletal muscle; The neuronal isoform of nitric oxide synthase (nNOS, termed also NOS-I) is expressed in normal adult skeletal muscle, suggesting important functions for Nitric oxide (NO) in muscle biology1,2,3. However, the expression and subcellular localization of NO in muscle development and myoblast differentiation are largely unknown. In this study, we examined effects of the nitric oxide generated by a microwave plasma torch, on proliferation/differentiation of rat myoblastic L6 cells. Experimental data pertaining to nitric oxide production are presented in terms of the oxygen input in units of cubic centimetres per minute. The various levels of nitric oxide are observed depending on the flow rate of nitrogen gas, the ratio of oxygen gas, and the microwave power4. In order to evaluate the potential of nitric oxide as an activator of cell differentiation, we applied nitric oxide generated from the microwave plasma torch to L6 skeletal muscles. Differentiation of L6 cells into myotubes was significantly enhanced the differentiation after nitric oxide treatment. Nitric oxide treatment also increase the expression of myogenesis marker proteins and mRNA level, such as myogenin and myosin heavy chain (MHC), as well as cyclic guanosine monophosphate (cGMP), However during the myotube differentiation we found that NO activate oxidative stress signaling erks expression. Therefore, these results establish a role of NO and cGMP in regulating myoblast differentiation and elucidate their mechanism of action, providing a direct link with oxidative stress signalling, which is a key player in myogenesis. Based on these findings, nitric oxide generated by plasma can be used as a possible activator of cell differentiation and tissue regeneration.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.498-498
• /
• 2013

Atmospheric Pressure Plasmas have pioneered a new field of plasma for biomedical application bridging plasma physics and biology. Biological and medical applications of plasmas have attracted considerable attention due to promising applications in medicine such as electro-surgery, dentistry, skin care and sterilization of heat-sensitive medical instruments [1]. Traditional approaches using electronic devices have limits in heating, high voltage shock, and high current shock for patients. It is a great demand for plasma medical industrial acceptance that the plasma generation device should be compact, inexpensive, and safe for patients. Microwave-excited micro-plasma has the highest feasibility compared with other types of plasma sources since it has the advantages of low power, low voltage, safety from high-voltage shock, electromagnetic compatibility, and long lifetime due to the low energy of striking ions [2]. Recent experiment [2] shows three-log reduction within 180-s treatment of S. mutans with a low-power palm-size microwave power module for biomedical application. Experiments using microwave plasma are discussed. This low-power palm-size microwave power module board includes a power amplifier (PA) chip, a phase locked loop (PLL) chip, and an impedance matching network. As it has been a success, more compact-size module is needed for the portability of microwave devices and for the various medical applications of microwave plasma source. For the plasma generator, a 1.35-GHz coaxial transmission line resonator (CTLR) [3] is used. The way of reducing the size and enhancing the performances of the module is examined.

• 동아시아식생활학회지
• /
• 제11권2호
• /
• pp.131-139
• /
• 2001

The physicochemical and sensory characteristics of brown rice flakes by different processing conditions such as flaking Process and their heat treatments were investigated to establish the brown rice flake processing procedure. To successfully make the compressed rice grain type flakes, the most appropriate water steeping conditions were 5 hours at 60'C. The brown rice flakes by compressed flaking procedure and heat treatment with microwave toasting showed the best crispiness-texture that tested from textrometer or sensory evaluation, and there was no significant difference between the source of rice varieties. The water absorption index(WAI) of tested flakes were negatively correlated with the water soluble index( WSI) and positively correlated with bowl life. The flakes made by compressed flaking procedure and heat treatment with microwave toasting showed longer bowl life, which is the length of the time that the cereal can retain its crispness after being soaked in milk.

• 한국전기전자재료학회논문지
• /
• 제18권11호
• /
• pp.1014-1018
• /
• 2005

The purpose of this study is to obtain strong bond strength at the interface between piezoelectric substrates and semiconductor thin films to be applied for the manufacture of high-performance acoustic wave semiconductor coupled device. For this purpose, we have compared and examined the effects of different surface treatment methods on hydrophile properties at the surface of the piezoelectric substrates. Moreover, we have observed the effect of microwave and laser on the elimination of water molecules at the interface. As for the piezoelectric substrates, dry method for surface treatment was found to be superior in the control of hydrophilicity of the surface compared to wet method. On the other hand, both microwave and laser were found to be effective in the elimination of water molecules in the interface.

• 생약학회지
• /
• 제44권2호
• /
• pp.149-153
• /
• 2013

The purpose of this study was to develop a new preparation process of ginseng extract with the high concentration of prosapogenin, the specific component in Red ginseng. Chemical transformation from the ginseng saponin glycosides to the prosapogenin was analyzed by the HPLC. The extracts of ginseng leaf and stem were processed at the several treatment conditions of the microwave and vinegar(about 14% acidity). MGLS-20 findings show that the ginseng leaf and stem extracts that had been processed with microwave and vinegar for 20 minutes peaked in the level of ginsenoside $Rg_3$(0.906%). MGLS-25 peaked in the level of ginsenoside $Rg_5$(0.329%) in the ginseng leaf and stem extract processed with microwave and vinegar for 25 minute. And the other kinds of ginseng prosapogenin did not show a higher content.

• 생약학회지
• /
• 제45권4호
• /
• pp.320-325
• /
• 2014

The purpose of this study is to develop a new preparation process of Notoginseng root(Panax notoginseng) extracts having high concentrations of ginsenoside $Rg_3$, $Rg_5$, $Rk_1$ and $Rh_4$, a special component of Red and Black ginseng(Panax ginseng). Chemical transformation from ginseng saponin to prosapogenin was analyzed by the HPLC. Extracts of Notoginseng root was processed under several treatment conditions including microwave and vinegar(about 14% acidity) treatments. Results of those treatments showed that the quantity of ginsenoside $Rg_3$ increased by over 7.6% at 15 minutes of pH 2~4 vinegar and microwave treatments. The results of processing with MPN-15 indicate that the microwave and vinegar(about 14% acidity) processed Notoginseng root extracts that had gone through 15-minute treatments were found to contain the largest amount of ginsenoside $Rg_3$(7.639%), $Rg_5$(6.061%), $Rk_1$(1.516%) and $Rh_4$(1.599). It is thought that such results provide basic information in preparing Notoginseng root extracts with functionality enhanced.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2002년도 춘계 국제 학술대회
• /
• pp.16-19
• /
• 2002

This study was carried out to establish the standardized analysis method in order to decide accurate concentrations of hazardous metals in the air. Acid decomposition method used usually was compared to microwave digestion method. Comparing results of tested background concentration in blank filter, we found that the magnitude of element concentration was Na, Ca, K, Mg, Al and Ba by order. The element concentrations of Glass fiber filter were higher than those of Quartz fiber filter, and the number of undetected components in Glass fiber filter was lower than that in Quartz fiber filter. Thus it is supposed that the concentration of background elements in Glass fiber filter was higher than those in Quartz fiber filter The extraction rate of microwave digestion method was superior to those of acid decomposition method during the test of blank filter as well as SRM of NIST. In case of the SRM of NIST, the average extraction efficiency of acid decomposition Method and microwave pretreatment is 53.8∼82.7％, 81.3∼97.1％, respectively. This result might be caused by the closed system of Microwave, which make outflow and loss of components less. Also microwave digestion method has other merits such as the minimization of time, reagents, and contamination. Furthermore, if the extraction condition, extraction time and used acids are optimized, the better results will be represented.

• 대한의생명과학회지
• /
• 제13권4호
• /
• pp.361-368
• /
• 2007

Biological samples can be fixed either by chemical method by using chemical solution or physical methods by using heat treatment. The problem in traditional heat fixation is unsatisfactory quality due to uneven heat conduction in specimen and loss of inner cell contents. Chemical fixation method also bears several intrinsic problems like the limit in specimen size, time consumption in fixative impregnation, and loss of low molecular weight cell components. These factors deteriorate the quality of fixed specimen, thus limit the magnification and contrast of tissue pictures. Microwave heat has been reported to be a good alternative to current chemical methods to overcome these problem. In this study, we tried to introduce the microwave energy method to routine fixation work in hospital. We replaced chemical fixative with saline to provide moderate reaction condition, and used frozen section to reduce time for sample preparation. Temperature was measured at each experiment. The fixation of rat kidney tissue with 2.45 GHz electromagnetic wave and saline showed similar result to the control group fixed with traditional chemical method. Human tumor tissue fixed with 2.45 GHz electromagnetic in frozen section was improved in terms of histochemistry of PAS and immunohistochemistry of tumor marker like cytokeratin. Total turnaround time was reduced from $24\sim38$ h to to $2\sim4$ h. In conclusion, the quality of samples prepared by microwave heating method was at least as good as that of traditional method. If the condition for the fixation of different specimens is standardized, this new method could be applied to routine work in hospital, and could save working time as well.

• 미생물학회지
• /
• 제11권2호
• /
• pp.101-106
• /
• 1973

microwave oven의 배지 처리에의 이용에 고나한 실험에서 다음 결론을 얻었다. 1)배지 융해에 이용함으로써 시간을 단축하고, 푸로판 불꽃 사용시의 실내 공기 오염을 막을 수 있었다, 2)혐기성 배지에서의 공기 저게는 wire barsket에 넣은 시험관을 물이 든 beaker에서 가열하므로써 끓어 넘는것을 막을 수 있었다. 3)배지 중의 E.coli 살균효과는 불꽃처리의 경우와 비슷하였으며 고압멸균을 대치할 수는 없을 것으로 판단되었다, 저자들의 실험실에서는 매일 5~6종의 배지를 만들기 위해 융해하며, 혐기성 세균동정을 위해 40~50개의 반유동 배지에서 공기를 제거하는바 이를 위해 지난 수개월간 microwave oven을 이용하고 있고 편리함을 경험하고 있다.