• 제목/요약/키워드: Microwave Properties

검색결과 994건 처리시간 0.027초

Electrochemical Properties of Li[Ni0.2Li0.2Mn0.6]O2 by Microwave-assisted Sol-gel Method

  • Park, Yong-Joon;Kim, Seuk-Buom
    • Transactions on Electrical and Electronic Materials
    • /
    • 제10권3호
    • /
    • pp.102-105
    • /
    • 2009
  • $Li[Ni_{0.2}Li_{0.2}Mn_{0.6}]O_2$ cathode materials have been synthesized by a microwave-assisted sol-gel method. The structure and electrochemical properties of $Li[Ni_{0.2}Li_{0.2}Mn_{0.6}]O_2$ were studied by X-ray difftactometry (XRD), scanning electron microscopy (SEM) and charge-discharge cycler. The powder prepared by microwave assisted sol-gel method showed good crystallinity and well-defined facet shapes. The $Li[Ni_{0.2}Li_{0.2}Mn_{0.6}]O_2$ electrode delivered a high discharge capacity of 230 $mAhg^{-1}$ at the specific current of 40 $mAg^{-1}$ (0.2 C rate) in the voltage range of 2.0${\sim}$4.8 V. About 60 % of the discharge capacity measured at 0.2 Crate (140 $mAhg^{-1}$) was maintained at a 6 C (1200 $mAg^{-1}$)rate. The cyclic property was also stable and it did not deteriorated at a high Crate.

고주파 소자용 $BaTi_4O_9$ 박막의 미세구조와 유전특성 연구 (Microstructure and Dielectric Properties of $BaTi_4O_9$ Thin Film for Microwave Devices)

  • 장보윤;이석진;남산;이확주
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
    • /
    • pp.125-129
    • /
    • 2004
  • [ $BaTi_4O_9$ ] thin film were grown on $Pt/Ti/SiO_2/Si$ substrate using rf magnetron sputter, and the microstructure and dielectric properties of the thin films were investigated. For the film grown at $350^{\circ}C$ and rapidly thermal annealed at $900^{\circ}C$, the $BaTi_5O_{11}$ Phase was formed. However, the $BaTi_4O_9$ phase was formed when the growing temperature exceeded $450^{\circ}C$ The dielectric constant of the $BaTi_4O_9$ thin film grown at $550^{\circ}C$ and rapidly thermal annealed at $900^{\circ}C$ was about 40 at low frequency range($100kHz{\sim}1MHz$) and 36 at microwave range($1{\sim}10GHz$) which is very close to that of the bulk $BaTi_4O_9$ phase. The dissipation factor was very low, about 0.005 at low frequency as well as microwave range.

  • PDF

마이크로파처리에 의한 심황색소의 화학안정성 및 세포독성 변화 (Changes in chemical properties and cytotoxicity of turmeric pigments by microwave treatment)

  • 송이슬;홍정일
    • 한국식품과학회지
    • /
    • 제49권6호
    • /
    • pp.693-698
    • /
    • 2017
  • 다양한 생리활성을 가진 심황과 쿠쿠미노이드가 가공식품류 등에 광범위하게 적용되는 바, 실제 식품 중에 이용되는 oleoresin turmeric 색소에 대해 마이크로파처리에 의한 화학안정성 및 생리활성의 변화를 분석하였다. 심황색소는 마이크로파 가열처리에 의해 황색도와 화학안정성이 감소하였으며 특히 3종의 쿠쿠미노이드 중 쿠쿠민이 마이크로파처리에 가장 민감하였고 BMC가 가장 안정하였다. 마이크로파처리 후 심황색소의 ABTS, AAPH peroxyl radical 및 아질산염 제거활성은 증가하였으며, DPPH 라디칼 제거활성에는 변화가 없었다. 심황색소에서 생성되는 활성 산소종은 마이크로파처리 후 증가하였으나, 정상장관계 세포 INT 407과 대장암 세포 HCT 116을 대상으로 한 세포독성 효과는 두 종류의 세포에서 모두 약화되었다. 본 연구에서는 다양한 식품 중에 첨가되는 심황색소가 마이크로파처리에 의해 화학적변화 및 생리활성에 영향을 가져올 수 있음을 보여주며, 이를 함유한 식품의 적절한 가공 및 조리방법이 고려되야 함을 제시하고 있다.

마이크로웨이브 추출조건에 따른 볶음 새송이버섯의 품질 특성 변화 (Change in Quality Properties of Extracts from Roasted Pleurotus eryngii by Microwave-Assisted Extraction Condition)

  • 윤성란;이명희;김현구;이기동
    • 한국식품저장유통학회지
    • /
    • 제13권6호
    • /
    • pp.732-739
    • /
    • 2006
  • 볶음처리한 새송이버섯의 마이크로웨이브 추출조건, 즉 에탄올 농도, 추출시간 및 마이크로웨이브 power에 따른 품질특성을 살펴보았다. 총 페놀성 화합물 함량, 전자공여능 및 pH 1.2에서의 아질산염소거능은 50% 에탄올로 추출한 경우 높게 나타났다. SOD 유사활성은 75% 에탄을 농도로 추출하였을때 가장 높은 활성을 나타났다. 가용성 고형분 및 총 페놀성 화합물 함량은 추출시간이 증가할수록 증가하다가 7분일 때 가장 높게 나타났으며, 전자공여능은 추출시간이 증가할수록 감소하는 것으로 나타났으며, SOD유사활성 및 아질산염소거능의 경우추출시간에 따른 유의적인 차이가 없는 것으로 나타났다. 마이크로웨이브 power 의 경우 100 W로 추출하였을 때 가용성 고형분, 총 페놀성화합물 함량 및 전자공여능 가장 높게 나타났다. SOD 유사 활성은 25 W일 때 높은 활성을 나타내었다. 그러나 아질산염 소거능은 마이크로웨이브 power에 영향을 많이 받지 않는 것으로 나타났다.

마이크로파 조사 시간에 따른 InGaZnO 박막 트랜지스터의 전기적 특성 평가 (The Effect of Microwave Annealing Time on the Electrical Characteristics for InGaZnO Thin-Film Transistors)

  • 장성철;박지민;김형도;이현석;김현석
    • 한국재료학회지
    • /
    • 제30권11호
    • /
    • pp.615-620
    • /
    • 2020
  • Oxide semiconductor, represented by a-IGZO, has been commercialized in the market as active layer of TFTs of display backplanes due to its various advantages over a-Si. a-IGZO can be deposited at room temperature by RF magnetron sputtering process; however, additional thermal annealing above 300℃ is required to obtain good semiconducting properties and stability. These temperature are too high for common flexible substrates like PET, PEN, and PI. In this work, effects of microwave annealing time on IGZO thin film and associated thin-film transistors are demonstrated. As the microwave annealing time increases, the electrical properties of a-IGZO TFT improve to a degree similar to that during thermal annealing. Optimal microwave annealed IGZO TFT exhibits mobility, SS, Vth, and VH of 6.45 ㎠/Vs, 0.17 V/dec, 1.53 V, and 0.47 V, respectively. PBS and NBS stability tests confirm that microwave annealing can effectively improve the interface between the dielectric and the active layer.

공정변수에 따른 microwave plasma CVD 다이아몬드/Ti 박막 증착 양상 조사 (Parametric study of diamond/Ti thin film deposition in microwave plasma CVD)

  • 조현;김진곤
    • 한국결정성장학회지
    • /
    • 제15권1호
    • /
    • pp.10-15
    • /
    • 2005
  • Microwave plasma CVD 다이아몬드/Ti 박막 성장 시 CH₄/H₂ 가스의 유량비율, chuck bias, microwave power 등이 다이아몬드 박막의 구조적 특성과 입자밀도에 미치는 영향에 대하여 조사하였다. 2∼3 CH₄ Vol.% 조건일 때 sp³-결합성의 탄소 neutral 들이 우선적으로 형성되고 sp²-결합성의 탄소 neutral 들이 선택적으로 제거됨에 따라 양질의 다이아몬드 박막을 얻을 수 있었으며, 다이아몬드 입자 증착 기구를 해석하였다. Ti 기판에 걸어준 negative chuck bias가 증가함에 따라 다이아몬드 핵생성이 증진되어 다이아몬드 입자 밀도가 증가하였고, 임계 전압은 약 -50V 임을 확인하였다. 또한, microwave power가 증가함에 따라 미세결정질(micro-crystalline) graphite 층 생성이 제어되고 다이아몬드 층이 형성됨을 확인하였다.

A new absorbing foam concrete: preparation and microwave absorbing properties

  • Xingjun, Lv;Mingli, Cao;Yan, Li;Xin, Li;Qian, Li;Rong, Tang;Qi, Wang;Yuping, Duan
    • Advances in concrete construction
    • /
    • 제3권2호
    • /
    • pp.103-111
    • /
    • 2015
  • The foam concrete was fabricated by adding the foaming agent which composite ordinary Portland cement with plant and animal protein into cement paste, and the electromagnetic wave absorption properties were studied for the first time as well. The studies showed that the electromagnetic waves can be absorbed by multiple reflections and scattering within the porous material. Thickness and filling ratio have a great influence on the electromagnetic wave absorbing properties in 2-18 GHz of the foam concrete, the greater the thickness, the better the performance of absorption; filling ratio was about 52 vol.%, the absorbing properties achieved the best.

BSST계 세라믹스의 마이크로파 유전특성에 미치는 $Nd_2O_3$ 첨가 효과 (The effect of $Nd_2O_3$ addition on the microwave dielectric properties of the BSST ceramics)

  • 박인길;류기원;배선기;이영희
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제9권5호
    • /
    • pp.439-444
    • /
    • 1996
  • 0.15(B $a_{0.95}$ S $r_{0.05}$)O-0.15(S $m_{2(1-x}$/N $d_{2x}$) $O_{3}$-0.7Ti $O_{2}$(x=0-10[m/o]) ceramics were fabricated by mixed oxide method. Microwave dielectric properties were investigated with contents of N $d_{2}$ $O_{3}$. In the case of specimen with N $d_{2}$ $O_{3}$(6[m/o]), dielectric constant, quality factor and temperature coefficient of resonant frequency were 78.14, 2938(at 3[GHz]) and +14.19[ppm/.deg. C], respectively. By comparison its properties with undoped specimen, dielectric constant and quality factor were highly improved, but the temperature coefficient of resonant frequency was increased to positive value......

  • PDF

(Ba$_{0.5}$Pb$_{0.5}$)Nd$_2$Ti$_5$O$_14$ 마이크로파 유전체의 저온소결과 마이크로파 특성 (Low-temperature Sintering and Microwave Properties in (Ba$_{0.5}$Pb$_{0.5}$)Nd$_2$Ti$_5$O$_14$ Ceramics)

  • 박재환;박재관
    • 마이크로전자및패키징학회지
    • /
    • 제8권2호
    • /
    • pp.9-13
    • /
    • 2001
  • $(Ba_{0.5}Pb_{0.5})Nd_2Ti_5O_{14}$(마이크로파 유전체 세라믹스에 borosilicate계 유리를 첨가하여 저온소결 특성과 마이크로파 특성을 조사하였다. Borosilicate계 유리가 2~3 wt% 첨가된 경우 $950^{\circ}C$의 소결 온도에서 소결성이 향상됨과 동시에 품질계수도 놀아지는 것을 확인할 수 있었다. BPNT에 3 wt%의 유리를 첨가함으로써 $950^{\circ}C$에서 유전율은 90에서 75 정도로 약간의 감소를 보였으나 마이크로파 품질계수 (Q$\times$f)는 4500 정도로 잘 유지되었고 공진주파수의 온도계수도 +10 $ppm/^{\circ}C$로서 잘 유지되는 결과를 나타내었다.

  • PDF

Microwave-Modified Sol-Gel Process for Microcystalline KY(WO4)2: Ho3+/Yb3+ Phosphors and their Upconversion Photoluminescence Properties

  • Lim, Chang Sung
    • 한국세라믹학회지
    • /
    • 제52권6호
    • /
    • pp.514-520
    • /
    • 2015
  • $KY_{1-x}(WO_4)_2:Ho^{3+}/Yb^{3+}$ yellow phosphors with doping concentrations of $Ho^{3+}$ and $Yb^{3+}$ ($x=Ho^{3+}+Yb^{3+}$, $Ho^{3+}=0.05$, 0.1, 0.2 and $Yb^{3+}=0.2$, 0.45) were successfully prepared using the microwave-modified sol-gel method; their upconversion (UC) photoluminescence properties were investigated in detail. Well-crystallized particles, formed after heat-treatment at $900^{\circ}C$ for 16 h, showed a fine and homogeneous morphology with particle sizes of $2-5{\mu}m$. Under excitation at 980 nm, the UC $KY_{0.7}(WO_4)_2:Ho_{0.1}Yb_{0.2}$ and $KY_{0.5}(WO_4)_2Ho_{0.05}Yb_{0.45}$ particles exhibited excellent yellow emissions based on a strong 545-nm emission band in the green region and a very strong 655-nm emission band in the red region. Pump power dependence and Commission Internationale de L'Eclairage chromaticity of the UC emission intensity were evaluated. The spectroscopic properties were examined comparatively using Raman spectroscopy.