• 한국식품조리과학회지
• /
• 제30권3호
• /
• pp.307-316
• /
• 2014

This study was carried out in order to investigate the quality characteristics of baguette with different amounts of yeast and fermented rice bran sourdough(Control: Yeast 30 g + Fermented rice bran sourdough 0 g, A sample: Yeast 20 g + Fermented rice bran sourdough 150 g, B sample: Yeast 10 g + Fermented rice bran sourdough 300 g, C sample: Yeast 0 g + Fermented rice bran sourdough 450 g). The pH of fermented rice bran sourdough by fermentation time was decreased as the fermentation time was longer. The pH of baguette dough was decreased as the fermented rice bran sourdough increased; the volume was the highest in control at the 1st fermentation, and in the B sample at the 2nd fermentation. The weight of baguette was the highest in the C sample, and the volume and specific volume were the highest in the B sample. The microstructure of the cross section analysis indicated that the air cell of baguette crumb was large and regular in the B sample. The moisture content and water binding capacity were the highest in the B sample, although significantly different. The L value was decreased as there was an increasing addition ratio of fermented rice bran sourdough; further, the a and b values were decreased with an increase in baguette volume. Hardness, gumminess and chewiness were decreased as volume and specific volume were increased; yet, springiness was increased. According to the result of the sensory evaluation, the flavor, taste, appearance and texture were the highest in the B sample.

• 한국세라믹학회지
• /
• 제33권7호
• /
• pp.725-734
• /
• 1996

점토질 소지에 있어서 수축 특성은 성형, 건조 및 소성 공정에 수반되어 치말화거등에 기여할 수 있는 구동력이 될 수 있다. 점토질 소지에서 저수축 치말화거동은 입자크기효과와 상전이 특성에 기인하는 열간 반응전이 거동을 포함하는 공정변수에 따라 크게 변화됨을 보였다. 90$0^{\circ}C$ 및 120$0^{\circ}C$에서 열처리된 Chamotte의 첨가를 통해서 점토질 소지의 열간 치밀화 과정에 기인하는 공정수축은 크게 억제될 수 있었다. 120$0^{\circ}C$에서 열처리된 조대한 Chamotte 입자는 점토 소지의 치밀화 거동을 억제하여 치밀한 소결미세구조를 얻을 수는 없었지만, 조대한 Chamotte 입자의 첨가는 neat-net-shape 제어를 촉진할 수 있었다. 점토질 소지에 있어서 미세구조/물성간의 연관관계는 저수축과 치밀화 거동사이의 상반된 특성을 제어함으로써 얻어진 최적조건에 따라 직접적인 영향을 받을 것으로 판단되었다.

• 한국재료학회지
• /
• 제30권7호
• /
• pp.376-382
• /
• 2020

CeO₂ nanoparticles, employed in a lot of fields due to their excellent oxidation and reduction properties, are synthesized through a solvothermal process, and a high specific surface area is shown by controlling, among various process parameters in the solvothermal process, the type of solvent. The synthesized CeO₂ nanoparticles are about 11~13 nm in the crystallite size and their specific surface area is about 65.38~84.65 ㎡/g, depending on the amount of ethanol contained in the solvent for the solvothermal process; all synthesized CeO₂ nanoparticles shows a fluorite structure. The dispersibility and microstructure of the synthesized CeO₂ nanoparticles are investigated according to the species of dispersant and the pH value of the solution; an improvement in dispersibility is shown with the addition of dispersants and control of the pH. Various dispersing properties appear according to the dispersant species and pH in the solution with the synthesized CeO₂ nanoparticles, indicating that improved dispersing properties in the synthesized CeO₂ nanoparticles can be secured by applying dispersant and pH control simultaneously.

• 구강생물연구
• /
• 제42권4호
• /
• pp.187-197
• /
• 2018

Chemical agents such as minocycline (MC) and citric acid (CA) were suggested in the treatment of contaminated implant surface. In this study, MC-HCl treatment was performed to enhance surface characteristics of titanium alloy surface. The purpose of this study was to assess the characteristics and the biocompatibility of Ti-6Al-4V surface treated by MC. Alpha-beta titanium alloy (Ti-6Al-4V) samples were prepared and they were divided into 6 groups according to chemical concentration and treatment time. These groups include 1) group I, non-treated smooth titanium alloy; 2) group II, MC 1.5 mg/mL for 1 hour; 3) group III, MC 1.5 mg/mL for 24 hours; 4) group IV, MC 15 mg/mL for 10 minutes; 5) group V, MC 100 mg/mL for 5 minutes; 6) group VI, pH1 CA for 3 minutes. The analysis of the surface characteristics of MC-treated titanium alloy was executed using scanning electron microscopy, roughness test, and X-ray photoelectron spectroscopy (XPS). Cell adhesion and MTT assay was done using MC3T3 cell. Titanium surfaces treated with MC indicated a more smoothened surface microstructure. For group II and III, the new peaks of rutile TiO2 were found. Group II and V have more basic group of Ti-OH form in XPS. In MTT assay, all MC-treated groups showed significantly higher cell viability compared to control. The surface roughness, crystal structure, surface hydrophilicity, cell viability of smooth titanium surface was improved by MC treatment. Compared with the control experiment and CA-treated group, smooth titanium surface treated with MC showed improved surface characteristics and cell biocompatibility.

• 소성∙가공
• /
• 제31권5호
• /
• pp.273-280
• /
• 2022

Although the mechanical properties of high-entropy alloys depend on the annealing conditions, limited works were established to investigate the annealing effect on the mechanical properties of Mo-added high-entropy alloys. Therefore, in the present work, the annealing effects on the microstructural evolution and mechanical properties of Mo-added high-entropy alloy were investigated. As a result, incomplete recrystallization from the limited annealing time not only suppresses deformation-induced phase transformation during cryogenic tensile test but also induces a deformation instability that results into the ductility reduction compare with the fully recrystallized sample. This result represents adjustment of annealing time is useful to control both transformation-induce plasticity and deformation instability of high-entropy alloys, and this can be applied to control the mechanical properties of metallic alloys by combining pre-straining and subsequent annealing.

• 한국발생생물학회지:발생과생식
• /
• 제25권4호
• /
• pp.257-268
• /
• 2021

Phthalates and their metabolites are well-known endocrine disrupting chemicals. Di-(2-ethylhexyl) phthalate (DEHP) has been widely used in industry and the exposing possibility to adult is high. In this study, DEHP was treated (133 ㎍/L and 1,330 ㎍/L in drinking water) according to the OECD test guideline 443 to mature female mice and their adrenal gland were examined for histological characteristics and steroidogenic gene expression. The wet weight of the adrenal gland was increased in all administrated groups compared to control. The diameter of zona fasciculata (ZF) was increased by DEHP in both outer ZF and inner ZF but there was no difference in morphology of the cells and arrangements into zona between groups. In addition, the arrangement of extracellular matrix was not different between control and DEHP groups. CYP11B1 was mainly localized at ZF and the intensity was not different between groups. DAX1 was localized in zona glomerulosa (ZG) and ZF, and its expression levels were decreased by DEHP administration. Its level was lower in DEHP133 group than DEHP1330 group. On the other hand, CYP17A1 was localized in ZG of DEHP1330 group. These results suggest that chronic low-dose DEHP exposing may modify the microstructure and function of the adrenal cortical cortex.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권12호
• /
• pp.1767-1773
• /
• 2015

Effects of water-misting sprays with forced ventilation after transport during summer on meat quality, stress parameters, glycolytic potential and microstructures of muscle in broilers were investigated. A total of 105 mixed-sex Arbor Acres broilers were divided into three treatment groups: i) 45-min transport without rest (T group), ii) 45-min transport with 1-h rest (TR group), iii) 45-min transport with 15-min water-misting sprays with forced ventilation and 45-min rest (TWFR group). The results showed the TWFR group significantly increased (p<0.05) initial muscle pH ($pH_i$) and ultimate pH ($pH_u$) and significantly reduced $L^*$ (p<0.05), drip loss, cook loss, creatine kinase, lactate dehydrogenase activity, plasma glucose content, lactate and glycolytic potential when compared with other groups. Microstructure of the muscle from TWFR group broilers under light microscopy showed smaller intercellular spaces among muscle fibers and bundles compared with T group. In conclusion this study indicated water-misting sprays with forced ventilation after transport could relieve the stress caused by transport under high temperature, which was favorable for the broilers' welfare. Furthermore, water-misting sprays with forced ventilation after transport slowed down the postmortem glycolysis rate and inhibited the occurrence of PSE-like meat in broilers. Although rest after transport could also improve the meat quality, the effect was not as significant as water-misting sprays with forced ventilation after transport.

• 한국식품과학회지
• /
• 제32권3호
• /
• pp.604-609
• /
• 2000

냉동반죽 제조시 xanthangum, guargum, ${\kappa}-carrageenan$을 반죽에 각각 첨가하여 12주 동안 냉동저장 하면서 이들이 반죽의 품질에 미치는 영향을 파리노그램, 익스텐소그램, 아밀로그램 등의 리올로지 특성과, pH 변화, 반죽의 물리적 구조를 통하여 비교검토하여 냉동반죽의 동해방지제로서의 가능성을 조사하였다. 검류 첨가가 반죽의 리올로지 특성에 비치는 영향을 조사한 결과 파리노그램 특성중 검류 첨가 반죽의 수분 흡수율, 반죽형성시간, 기계적 내성이 대조구에 비하여 증가하였다. 익스텐소그램 특성중 검류 첨가 반죽의 저항도는 크게 증가하였고 신장도는 대조구와 같아 R/E 비율은 대조구에 비해 증가하였다. 아밀로그램 특성중 호화개시온도는 대조구가 $59.5^{circ}C$이었으며, 검류 첨가 반죽이 $58^{circ}C$ 나타나 대조구의 호화개시 온도가 높았으나, 최고점도는 대조구가 550 B.U, xanthangum guargum, ${\kappa}-carrageenan$ 첨가반죽이 각각 690, 780, 760 B.U를 보여 검류첨가 반죽의 최고 점도가 높았다. ${\kappa}-carrageenan$ 및 xanthangum 첨가 반죽의 pH는 대조구에 비하여 냉동 저장 기간중 낮게 나타나 냉동 저장중 반죽의 냉동장해를 적게 받은 것으로 나타났다.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.319-334
• /
• 2006

Mechanical and chemical methods are the two ways to treat the implant surfaces. By using mechanical method, it is difficult to eliminate bacteria and by-products from the rough implant surface and it can also cause the structural change to the implant surface. Therefore, chemical method is widely used in order to preserve and detoxicate the implant surface more effectively. The purpose of this study is to evaluate the effect of tetracylcline-hydrochloride(TC-HCI) on the change of implant surface microstructure according to application time. Implants with pure titanium machined surface, SLA surface and porous surface were used in this study. Implant surface was rubbed with sponge soaked in 50mg/ml TC-HCI solution for $\frac{1}{2}$ min., 1 min., $1\frac{1}{2}$ min., 2 min., and $2\frac{1}{2}$ min. respectively in the test group and with no treatment in the control group. Then, specimens were processed for scanning electron microscopic observation. 1. Both test and control group showed a few shallow grooves and ridges in pure titanium machined surface implants. There were not significant differences between two groups. 2. In the SLA surfaces, the control specimen showed that the macro roughness was achieved by large-grit sandblasting. Subsequently, the acid-etching process created the micro roughness, which thus was superimposed on the macro roughness. Irrespective of the application time of 50mg/ml TC-HCI solution, in general, test specimens were similar to control. 3. In the porous surfaces, the control specimen showed spherical particles of titanium alloy and its surface have a few shallow ridges. The roughness of surfaces conditioned with tetracycline-HCI was lessened and seen crater-like irregular surfaces relative to the application time. In conclusion, pure titanium machined surfaces and SLA surfaces weren't changed irrespective of the application time of tetracycline-HCI solution. But the porous surfaces conditioned with tetracycline-HCI solution began to be slightly changed from 2 min. This results are expected to be applied to the regenerative procedures for peri-implantitis treatment.

• 대한치과보철학회지
• /
• 제22권1호
• /
• pp.51-68
• /
• 1984

The purpose of this study is primarily to test the use value of tooth ash as an alternative material of the synthetic hydroxyapatite. For this purpose the author performed the experimental study to investigate the phsyical properties of sintered tooth ash and its histocompatibility in vitro. The tooth ash was made by incinerating procedure at $650^{\circ}C,\;750^{\circ}C,\;850^{\circ}C,\;950^{\circ}C\;and\;1050^{\circ}C$ respectively. The composition of tooth ash was analyzed and X-ray diffraction was done. The experimental specimens were molded to the cylinderical form 1 cm high, 1 cm in diameter under the pressure of $1000kg/cm^2$, which were divided into two groups; the one is sintered tooth ash at $1100^{\circ}C$ and the other is fired mixture of tooth ash and dental porcelain mixed to the weight ratio of 4:6, 5:5, 6:4 and 7:3. The physical propoerties of the sintered specimens were examined and their microstructure was observed under the Scanning Electron Microscope. The results obtained were as followings: 1. The difference of the tooth ash composition depending on incinerating temperature was of no significance, but the $CO_2$ disappeared from $950^{\circ}C$. 2. X-ray diffraction showed the tooth ash was mainly composed of hydroxyapatite and a small amount of - white lockite. But phase transformation was not disclosed. 3. The microstructure of the sintered specimens of the ashed tooth powder was of no difference in the structure and grain size accompanying the ashed temperature, but sintering ability seemed to be the best in the specimen incinerated at $950^{\circ}C$. 4. There was good wettability in the mixed sintered specimens of the ashed tooth powder and the porcelain powder. 5. The compressive strength of the sintered specimens of the tooth ash incinerated at $950^{\circ}C$ was the highest with $589.75kg/cm^2$ and the porosity and the absorption were the lowest as well. 6. The mixed sintered specimens of the tooth ash and porcelain powder was good in the physical properties in the case of mixed weight ratio of 6:4. 7. The animal fibroblast cultures with porcelain showed increase in the cell number, whereas the tooth ash showed a small degree of growth inhibition. But the difference of cell multiplication efficiency between control cultures and test cultures with tooth ash was not observed.