• 한국통신학회논문지
• /
• 제32권6A호
• /
• pp.648-656
• /
• 2007

본 논문은 S-라인(비방사 마이크로 스트립)을 이용하여 무선 가입자 회선(WLL) 및 지역 다지점 분배 서비스(LMDS) 등 광대역 무선 가입자 망으로의 기술 적용을 위한 밀리미터 대역의 중심주파수 37GHz에서 세라믹을 이용한 대역 통과 필터에 관한 것이다. 아래 위가 도체로 덮인 유전체 기판 위의 선로 사이에 세라믹 공진기를 삽입시켜, 구조적 공진 특성을 이용함으로써 필터 특성을 얻어내는 방법으로 제작하였다. 이러한 필터 구조와 특성을 근거로 한 시뮬레이션을 하여, 1단 세라믹 공진기의 공진주파수를 찾는 공식과 4단 세라믹 공진기의 대역을 구하는 공식을 일반화 하였다. 또한, 4단 세라믹 공진기의 시뮬레이션 결과를 바탕으로 제작된 실험 구조물을 Network Analyzer를 사용하여 실험을 실시하였으며, 시뮬레이션 결과의 대역은 36.58GHz-37.650GHz, 리플과 손실은 -ldB 이내. Cutoff 특성은 S(2,1)그래프의 대역 좌우로 -35dB밑으로 1GHz이내인 것에 대하여 실험 결과의 대역은 36.6GHz-37.65GHz, 손실은 -ldB이내, 리플은 -3dB이내, Cutoff 특성은 S(2,1)그래프의 대역 좌우로 -30dB밑으로 1GHz 이내인 특성을 나타내었다.

• 한국전자통신학회논문지
• /
• 제10권6호
• /
• pp.653-658
• /
• 2015

본 논문에서는 MMIC(: Monolithic Microwave Integrated Circuit) 설계에 적용 가능한 결함 접지면 구조의 사각 분리형 링 공진기를 제안한다. 본 논문에서는 공진기의 등가회로 파라미터를 공진기의 측정된 특성 값으로부터 수식적으로 계산하는 방법을 나타내었다. 본 논문에서 제안하는 방법을 검증하기 위해 공진주파수가 2.95 GHz인 결함 접지면 구조의 사각 분리형 링 공진기를 제작하여 특성을 측정하고 그것을 본 논문의 방법대로 등가 파라미터를 계산하였다. 이 결과를 시뮬레이션한 결과와 비교하여 일치함을 보였다.

• Journal of electromagnetic engineering and science
• /
• 제5권4호
• /
• pp.204-207
• /
• 2005

In this paper, PBG structure and feedforward circuit has been used to suppress the phase noise of the oscillator. Microstrip line resonator have low Q, but we can obtain high LO power by feedforward circuit and improve the resonator Q by the PBG, simultaneously. The proposed oscillator which uses PBG and feedforward circuit shows 0${\~}$20 dB phase noise reduction compared to the conventional oscillator. We have obtained -115.8 dBc of phase noise at 100 kHz offset from 2.4 GHz center.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.202-206
• /
• 2001

In this paper a novel dielectric resonator (DR) bandpass filter (BPF) with flexible arrangement of attenuation poles is proposed. This DR filter is similar to a conventional DR filter except adding a microstrip line below a DR, which not only shifts the location of attenuation poles, but also improves skirt characteristics. The duplexer with the proposed DR BPF has been yielded better isolation and sharper skirt behavior than that with a conventional DR alter. The implemented duplexer has shown a good performance and been well agreed with the simulation.

• 한국항해학회지
• /
• 제22권2호
• /
• pp.33-38
• /
• 1998

Approximate design formulse for bandpass filter using stepped microstrip lines are derived. The coupling length of which can be adjusted according to the factor K.Some advantages fo this filter, thus, are the abilities to control the size and shape by changing the structure of the resonator. Using the design formulas an experimental filter was designed and fabricated . The experimental results have been agree with the designed ones, and hence, the validity of the proposed method has been confirmed.

• 대한전자공학회논문지
• /
• 제16권5호
• /
• pp.42-48
• /
• 1979

본 논문에서는 마이크로스트립 링 공진기를 사용하여 마이크로파 대역에서 주파수 변별기를 실현할 수 있음을 보였다. 임피던스 차원을 갖는 Green함수를 이용하여 해석하였으며, S-band(중심주파수 50=30GHz)에서 최대 45MHz의 주파수 변별특성을 실험으로 확인하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.425-428
• /
• 2008

A new type of cross-coupled planar microwave filter using coupled microstrip square open-loop resonators diplexer pro-posed. A method for the rigorous calculation of the coupling coefficients of basic four pole electric and magnetic coupling structures encountered. Simple empirical models are derived for estimation of the coupling coefficients. Experiments are performed to verify the theory. And a method for diplexer matching is conjugate matching that has characteristic better than open matching method.

• Journal of electromagnetic engineering and science
• /
• 제17권4호
• /
• pp.197-201
• /
• 2017

In this paper, we present a novel design for a dual-band bandpass filter (BPF) based on the conventional second-order, open-loop BPF. By adding series resonant circuits to the open ends of the resonator, we can create two resonant modes from the even and odd modes. One pair of the even and odd modes constitutes the upper passband, while the other pair constitutes the lower passband. By adding another series resonant circuit to the open-loop resonator, we can control the bandwidth of either the upper passband or the lower passband. We can replace the series resonant circuits with simple microstrip line resonators. A dual-band BPF working at both Wi-Fi bands (2.4 GHz and 5.8 GHz bands) is designed based on the proposed method and is tested. The measured and simulated results show excellent agreement.

• 한국통신학회논문지
• /
• 제22권5호
• /
• pp.967-973
• /
• 1997

In this paper, the designed and fabrication of a K-band push-push oscillator using miniaturized hairpin resonator have been presented. One experimenal oscillator has been designed and fabricated for K-band point-to-point operation. the miniaturized harpin resonator has been analyzed theoretically and simulated by MPIE(Mixed Potential Integral Equation) method. With this results, the analysis of hairpin resonator which coupled microstrip line has been carried out with transmission-mode using this results. an optimized output matching network for the suppression of the fundamental and the 3rd order harmonic was acquired by using a nonlinear analysis method. The fabricated oscillator shows the output power of -2.28dBm, the fundamental frequency suppression of -19dBc, the 3rd order harmonic suppressionof -24dBc and 0.33 percent effiiency at 22.8GHz. The experimental outputs are in good agreement with the theoretical and simulated results.

• 전기학회논문지
• /
• 제62권5호
• /
• pp.663-666
• /
• 2013

This paper demonstrates four different radio frequency (RF) resonators at 3 T magnetic resonance imaging (MRI) system. An approach based on microstrip transmission line to identical RF resonators except upper stripline structure is investigated. Electromagnetic simulation results are compared for RF resonators and discussed in detail at 3 T.