• 제목/요약/키워드: Microstrip patch

검색결과 620건 처리시간 0.038초

마이크로스트립 원형 및 사각형 급전 슬롯 패치 안테나의 광대역 특성 (Wide Band Characteristics of the Microstrip circular and square Slot Patch Antenna)

  • 이용창;백경훈
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2001년도 춘계종합학술대회
    • /
    • pp.223-227
    • /
    • 2001
  • 마이크로스트립 패치 안테나가 갖는 협대역 특성을 보완하기 위하여 슬롯 패치 안테나를 광대역특성을 갖도록 설계하여 제작하였다. 마이크로스트립 슬롯 패치 안테나의 슬롯 크기와 급전부의 형태를 적절하게 설계하면 광대역의 특성을 가진 수 있다. 본 논문에서는 비유전율 10.6, 두께 50mi1인 epsilon-10 기판을 사용하여 원형 급전 구조인 인형 슬롯 안테나를 제작하였을 경우, 주파수 대역이 1.5∼2.28GHz으로 41%의 대역이 나타났다. 또한, 비유전율 4.75, 두께 1.6mm인 에폭시 기판에 사각형 급전 구조인 원형 슬롯 안테나를 제작한 결과, 주파수 대역 1.2∼2.7GHz으로 77%의 대역 특성을 얻었다. 이들 결과는 각각의 슬롯 형태 구조에서의 광대역 특성들을 얻을 수 있었다.

  • PDF

패턴 변환 루프 구조를 가지는 마이크로스트립 패치 안테나 (Pattern-Switchable Microstrip Patch Antenna with Loop Structure)

  • 김용진
    • 한국산학기술학회논문지
    • /
    • 제13권11호
    • /
    • pp.5447-5451
    • /
    • 2012
  • 본 논문은 마이크로스트립 패치 안테나에 루프구조를 추가하여 방사패턴의 변환이 가능한 안테나를 제안한다. 패턴 변환을 위한 루프 구조를 패치 안테나의 급전부와 연결하며, 스위치 on/off 에 따라서 안테나의 방사패턴이 가변되는 구조가 된다. 제안된 안테나의 동작주파수는 2.4GHz이며, 최대이득은 3.2dBi 이다. MIMO (Multi-Input Multi-Output), WLAN등의 무선통신 시스템에서 diversity나 스마트 안테나 시스템에 장착을 목적으로 한다. 제안된 안테나의 patch 사이즈는 $28mm{\times}28mm$이며, ground plane의 사이즈는 $40mm{\times}50mm$이다. 제안된 안테나는 2층의 적층 구조를 하고 있으며, 스위치 on/off 동작에 의해 안테나의 패턴이 가변됨을 시뮬레이션과 측정을 통하여 보였다.

E-면으로 직접 결합된 마이크로스트립 어레이 안테나 (Mecrostrip Array Antenna Directly Coupled to E-Plane)

  • 김태형;홍재표;박진택;조영기;손현
    • 전자공학회논문지A
    • /
    • 제28A권1호
    • /
    • pp.23-29
    • /
    • 1991
  • In order to improve the radiation characteristics of the microstrip antenna, microstrip array antenna consisting of one center patch fed by a coaxial probe and several patches directly coupled to the E-plane by microstrip line is analyzed. The equivalent circuit of the array antenna is represented by the conventional transmission line and the various parameters, such as the mdicrostrip line length, the patch length and the feed point location are calculated to improve the radiation pattern for 5-patch array antenna which has the equal patch width. The 5-patch array antenna with the radiation pattern which has low sidelobe level and narrow beam width is fabricated and then the measured results are compared with the computed values and the results of the single patch microstrip antenna too.

  • PDF

시간영역 유한차분법을 이용한 밀리미터파대 마이크로스트립 패치 안테나 해석 (Analysis of Millimeter Wave Microstrip Patch Antennal Using FDTD Method)

  • 배진석;고성선;송기홍;윤현보
    • 한국전자파학회논문지
    • /
    • 제9권5호
    • /
    • pp.668-677
    • /
    • 1998
  • 밀리미터파대 마이크로스트립 패치 안테나 해석에 시간영역 유한차분법 (FDTD)의 적용 가능성올 입증하였다. 이 방법을 이용하여 32.153 GHz에서 공진하는 마이크로스트립 patch 안테나의 크기를 최척화하고, 입력 임피던스, 정재파비와 복사패턴올 계산하였다. MOM (method of moment)과 FDTD 방법에 의해 계산된 마이크 로스트립 패치 안테나의 공진 주파수를 측정값과 비교한 결과, 각각의 차이가 12.27 %와 1.23%이었다. 또한 이 Ka-밴드 패치 안테나의 대역폭은 X밴드에서와 같이 약 8%이었다.

  • PDF

A Small Size Broadband MEMS Antenna for 5 GHz WLAN Applications

  • Kim, Ji-Hyuk;Kim, Hyeon-Cheol;Chun, Kuk-Jin
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제5권3호
    • /
    • pp.204-209
    • /
    • 2005
  • A small size broadband microstrip patch antenna with small ground plane has been fabricated using MEMS. Multiple layer substrates are used to realize small size and broadband characteristics. The microstrip patch is divided into 3 pieces and each patch is connected to each other using a metal microstrip line. The fabrication process is simple and only one mask is needed. Two types of microtrip antennas are fabricated. Type A is the micros trip antenna with metal lines and type B is the microstrip antenna without metal lines. The size of proposed microstip antenna is $8^{*}12^{*}2mm^{3}$ and the experimental results show that the antenna type A and type B have the bandwidth of 420 MHz at 5.3 GHz and 480 MHz at 5.66 GHz, respectively.

5GHz 무선랜 응용을 위한 소형 광대역 MEMS 안테나 (A Small Size Broadband MEMS Antenna for 5 GHz WLAN Applications)

  • 김지혁;김현철;전국진
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.603-604
    • /
    • 2006
  • A small size broadband microstrip patch antenna with small ground plane has been fabricated using MEMS. Multiple layer of high and low dielectric substrates are used to realize small size and broadband characteristics. The microstrip patch is divided into 4 pieces and each patch is connected to each other using a metal microstrip line. The fabrication process is very simple and only one mask is needed. Two types of microtrip antennas are fabricated. Type A is the microstrip antenna with metal lines and type B is the microstrip antenna without metal lines. The size of proposed microstip antenna is $8*12*2mm^3$ and the experimental results show that the antenna type A and type B have the bandwidth of 420MHz at 5.3 GHz and 480MHz at 5.66 GHz, respectively.

  • PDF

마이크로스트립 패치 안테나의 급전 위치에 따른 평가 (Estimation of Microstrip Patch Antenna corresponding to Feed Positions)

  • 김태용;이종익
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2015년도 춘계학술대회
    • /
    • pp.473-474
    • /
    • 2015
  • 반파장 길이를 가지는 일반적인 마이크로스트립 안테나는 작은 대역폭 특성을 가진다. 패치 안테나의 급전 방법 및 위치에 따라 입력 임피던스가 변하여 방사 특성에도 영향을 미치게 된다. 본 논문에서는 2.4GHz ISM 대역에서 동작하는 광대역 마이크로스트립 패치 안테나를 설계하고, 급전 위치를 변경하였을 때의 입력 임피던스의 변화를 평가하였다.

  • PDF

WLAN용 소형 광대역 H-모양 마이크로스트립 안테나 (Design of a Miniature Wideband H-shaped Microstrip Antenna for WLAN)

  • 이문수
    • 대한전자공학회논문지TC
    • /
    • 제41권3호
    • /
    • pp.173-173
    • /
    • 2004
  • 본 논문에서는 무선 근거리 지역 통신망(WLAN: Wireless Local Area Networks)용 광대역 2층 H-형 마이크로스트립 패치 안테나를 설계한다. 마이크로스트립 패치 안테나의 대역폭을 개선하기 위해서 기생패치를 부가하여 다층배열한다. 그리고 안테나의 크기를 줄이기 위해, 기본 방사소자와 기생패치는 10개의 단락봉으로 단락된 H-모양의 패치로 설계한다. 마이크로스트립 안테나는 모멘트법으로 작성된 ENSEMBLE ver 5.0의 소프트웨어를 사용하여 설계하고 실험치와 비교한다. 제작된 안테나의 대역폭은 5.46㎓에서 740㎒(13.5%)이며, 이것은 계산치 770㎒(13%)와 거의 근사하다. 또한 동일 주파수에서 동일 기판에 설계된 안테나 크기는 반파장 구형 마이크로스트립 패치 안테나에 비해 71.5%로 축소되었다.

ISM 대역용 원통형 마이크로스트립 안테나에 관한 연구 (A Study on the Cylindrical Microstrip Antenna for ISM Band Applications)

  • 정돈기;최병하
    • 한국항행학회논문지
    • /
    • 제10권4호
    • /
    • pp.326-332
    • /
    • 2006
  • 본 논문에서는 수직편파 수평면내 무지향성을 갖는 마이크로스트립 안테나를 연구하기 위하여 마이크로스트립 패치의 안테나 소자 4개를 원통형 표면상에 수평으로 배열하였다. 안테나의 중심주파수는 ISM 대역인 2.45GHz를 선택하였다. 이는 무선 LAN의 접속점, 무선 마이크의 기지국 등에서 적용이 가능하기 때문이다. 먼저 기본 계산식에서 기본 패치의 폭과 길이를 계산하고 2.5D와 3D 컴퓨터 시뮬레이션으로 최적화하였다. 제작된 안테나의 특성을 측정한 결과 동축케이블 포트의 임피던스는 51.915+j3.688 ${\Omega}$이며, 반사손실은 -31dB, 전압정재파비는 1.081로 나타났다.

  • PDF

"ㄷ" 자형 폴디드 마이크로스트립 패치 안테나 설계 (Design of "ㄷ"-Shaped Folded Microstrip Patch Antenna)

  • 허희무;서정식;허진영;우종명
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.464-467
    • /
    • 2003
  • In this paper, to reduce the patch size of microstrip antenna, folded surface-type patch antenna is designed and fabricated. Size reduction could be achieved because of the downed resonant frequency by the extended current path passing along below the transformated patch surface. Comparison of the patch size at the 1.575 GHz between plane type(length 82 mm${\times}$width 90 mm) and "ㄷ"-shaped folded type is carried and comparision of frequency variation at the same patch size is carried. The result is like that the patch size was reduced than the plane type by 60 mm(73.17 %) at the same frequency. Therefore, it could be checked that "ㄷ"-shaped folded type antenna is advantageous than the plane type in size reduction.

  • PDF