• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.260-262
• /
• 2000

Printed microstrip antennas are known to have limitations in terms of bandwidth by the presence of the dielectric substrate. In this paper, to overcome these limitations, a broadband microstrip bow-tie antenna which has two dip point for high speed wireless LAN, fabricated on a Taconic substrate is designed and simulated. In simualted results, the return loss is two dip point which is -28.5dB at 5.68GHz and -27dB at 5.85GHz. The bandwidth of this antenna is 8.7％ about VSWR$\leq$2 and 5.9％ about VSWR$\leq$1.5.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.5
• /
• pp.468-474
• /
• 2002

In this paper a novel two-arm microstrip spiral antenna with a circular slot on the ground plane is presented. The proposed antenna structure is constructed in a planar form without a balun circuit and the radiation characteristics of conventional and eccentric spiral antennas are obtained simultaneously. The main beam direction is normal to the plane of the spiral for characteristic frequency band and the direction of the main beam moves linearly into $\theta$ and $\phi$ direction as the frequency increases.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1008-1014
• /
• 2011

In this paper, multi-band fractal microstrip patch antenna which is possible for WLAN band and WiMax band is designed and made. For multi-resonance of developed antenna, resonance frequency, impedance matching, polarity and reflection pattern can mad perfectly, then to make satisfied multi-independent frequency three kind of half circle fractal patch is inserted. In the situation continuously happening half circle in designed structure, antennas one of half-circle band is shown.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.753-762
• /
• 1996

In this paper, aperture coupled stacked microstrip array antennas are proposed and their operating characteristics are analyzed based on analytical. In order to evaluate mutual coupling between slot-coupled microstrip patches in finite array, analysis uses the reciprocity theorem and the spectral domain Green's functions for dielectric slab in a moment method solution for the unknown patches and solts current distrbution. By introducing an N-port equivalent network, the impedance matrix of an affay of N-element slot-coupled patches is evaluated directly from its network current matix of order N$^{2}$, and it can be programmed to be run on a PC. Numerical results show mutual coupling, radiation pattern, active reflection coefficient versus scan angle, radiation efficiency and active element gain pattern.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.3
• /
• pp.65-81
• /
• 1996

In this study forty-five X-bnd rectangular microstrip patch antennas fed by microstrip line using ${\lambda}$/4 transformer were fabricated on teflon substrates with low high permittivities and varous thickness (substrate thickness : 0.6 ~ 2.4 mm, permittivities : 2.15 ~ 10.0), and effects of permittivity and electrical thickness on antenna characteristics were studied with measured return loss (1/S$_{11}$) and resonant frequencies. When substrate electrical thickness was greater than 0.060 ${\lambda}_{0}$return loss was very good and genrally more than 20 dB, but resonance characteristics was somewhat unstable. The more than 0.088 ${\lambda}_{0}$ the thickness was, the more unstable it was. As a result, in the rest range except 12, 13 GHz we had very good mesured return loss iwth greater than 20 dB, and in the range 7 to 9 GHz resonant frequencies were within $\pm$2 % error, on ${\epsilon}_{r}$=5.0, height = 2.4 mm substrate.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.219-220
• /
• 2006

In this paper, we designed and implemented the Dual Band Dipole Antenna with Tapered Microstrip Balun for WLAN Access Point. Two dipole antennas with different resonant frequency and the antenna structure combined additional line were implemented for dual band performance. In order to feed the balun current, the tapered microstrip balun was used. Produced the Dual Band Antenna shows a special quality. The quality is that all VSWR is less than 1.5 in the 2.4GHz and 5GHz frequency bands in 802.11 standards, and it profits not less than 1.7dBi having typical Dipole Antenna pattern the very "a form of 8"pattern and Omni-directional pattern.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.175-178
• /
• 2000

The resonance characteristic of microstrip antenna with an airgap between the substrate layer and ground plane is investigated. The study is performed by using a rigorous Green’s function formulation in the spectral domain and Galerkin’s moment method calculation. The numerical convergence using sinusoidal basis functions, the unknown surface current distribution in the rectangular patch, is discussed. Numerical result for the effects of airgap and patch length on the complex resonant frequencies of the rectangular microstrip structure are also presented

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.195-198
• /
• 1999

A technique is investigated for achieving broadband properties by controlling the operation frequency of microstrip antennas. The control is achieved by applying DC bias to the microstrip antenna. Air gap antenna with PZT post is fabricated. by using in C-band. In the case of Air gap antenna, the variation of center frequency was about 16Mhz and the bandwidth was increased up to 123.3% at 15dB, 160.7% at 20dB than before applying DC bias respectively. The change property of frequency in air gap antenna is nearly the same the C-V property in PZT.

• Journal of electromagnetic engineering and science
• /
• v.18 no.2
• /
• pp.101-107
• /
• 2018

The impedance bandwidth and radiation characteristics of an aperture-coupled microstrip line-fed patch antenna (ACMPA) with a high permittivity (${\varepsilon}_r=10$) feed substrate suitable for integration with a monolithic microwave integrated circuit (MMIC) are investigated for various feed substrate thicknesses through an experiment and computer simulation. The impedance bandwidth of an ACMPA with a high permittivity feed substrate increases as the feed substrate thickness decreases. Furthermore, the front-to-back ratio of an ACMPA with a high permittivity feed substrate increases and the cross-polarization level decreases as the feed substrate thickness decreases. As the impedance bandwidth of an ACMPA with a high permittivity feed substrate increases and its radiation characteristics improve as the feed substrate thickness decreases, the ACMPA configuration becomes suitable for integration with an MMIC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1740-1746
• /
• 1997

In this paper, a waveguide-fed slot-coupled microstrip antenna is proposed as enhanced feeding structure of microstrip antenna and an analysis is presented. The presence of dielectric substrate between a stripand a slot is explicitly taken into account in this analysis. The evaluation of the antenna characteristics is carried out using the method of mements and the spectral domain approach in terms of the electric current distribution on the strip and the magnetic current distribution on the slot. From the results, we can conclude that the proposed structure is adequate for array antennas, due to ease of mass porduction and enhanced anteena performance.