• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.321-324
• /
• 1988

This paper presents the result of driving performance analysis of PMSM type AC servo motor based on control system using a microprocessor. The experiment using the microprocessor is tested with a 120[v], 200[w] PMSM type AC servo motor. The PWM signal generated in the microprocessor for the servo motor voltage is chapped by power transistor modules to change the AC servo motor speed. The torque of the AC servo motor with a permanent magnet can be easily controlled over a wide range by changing the AC servo motor current.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.857-862
• /
• 2003

In this paper, we concern for development of precise measuement system for civil structure by using one chip microprocessor based on communication system. The datalogger is developed by using 80C196KC microprocessor. It has RF communication modul and data acquisition function for several kinds of sensors such as load cell, tilt-meter, strain gauge, tension meter, themocouple and so on. The data is acquisited by datalogger is sent to a main server which is located at central monitoring office. The server has a function suppervising several data points located at civil structures, it analyzes the data and shows the data graphically. The effectiveness of the developed system is proven through experimental results by an application for the bridge of Nakdong river edge in Busan, Korea.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.102-105
• /
• 2000

A simple digital control system has been developed for the frequency stabilization of an internal mirror He-Ne laser. The system is based on one chip microprocessor with embedded Basic interpreter. To stabilize the laser output frequency, the signal such as power difference or beat frequency between two modes is supplied and processed by a microprocessor, and control signal is fed to the heating coil would round the laser tube for adjusting the spacing of the laser cavity mirror. Newly developed frequency stabilization system is totally digitized. The system and the frequency stability performance are briefly described.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권4호
• /
• pp.229-234
• /
• 2007

In this paper, we present an efficient instruction set architecture using vector register file hardware to accelerate operation of general matrix-vector operations in DSP microprocessor. The technique enables in-situ row-access as well as column access to the register files. It can reduce the number of memory access significantly. The technique is especially useful for block-based video signal processing kernels such as FFT/IFFT, DCT/IDCT, and two-dimensional filtering. We have applied the new instruction set architecture to in-loop deblocking filter processing in H.264 decoder. Performance comparisons show that the required load/store operations for the in-loop deblocking filter can be reduced about 42%. The architecture would improve the processing speed, and code density in DSP microprocessor especially for video signal processing substantially.

• Journal of Mechanical Science and Technology
• /
• 제20권8호
• /
• pp.1159-1168
• /
• 2006

In this paper, a new revolute mobile robot arm with five degree of freedom (d.o.f) was developed for autonomous moving robots. As a control system for the robot arm, a distributed control system composed of the main controller and five motor controllers for arm joints was developed. The main controller and the motor controllers w ε re developed using the ARM microprocessor and the TMS320c2407 microprocessor, respectively. A new trajectory tracking algorithm for the motor controllers was devised employing pre-generated off-line trajectory data. Also, a 3-D simulator based on the openGL software to simulate the motion of the robot arm was developed. To validate the performance of the robot system, experiments to track a specified trajectory were performed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권3호
• /
• pp.121-130
• /
• 1996

Permanent magnet synchronous motor is widely used in industrial drive applications due to high efficiency, high power ratio, and easy maintenance. Position and speed detectors required in this motor increase the drive cost, and reduce the application range. Some papers present the speed control without position and speed detectors using DSP characterized by high processing performance. However, DSP increases the cost, and makes the inplementation difficult. This study has performed the speed control without position and speed detector by means of the microprocessor system which can be easily accessed. The results of simulation and experiment showed comparatively good dynamics in spite of the sensorless system.

• International Journal of Advanced Culture Technology
• /
• 제8권4호
• /
• pp.299-305
• /
• 2020

With the advancement of the 4th Industrial Revolution(4IR), microprocessor education is on the rise due to the explosive demand for IoT (Internet of Things) and M2M devices. However, it is difficult due to many constraints to efficiently transfer training on hardware assembly and implementation through online training. Thus, we developed a cost-effective online content based on Arduino simulations, Atmel Studio 7, and WinAvr simulator that are required for the utilization of AVR 128. These Camtasia videos overcame the limitation of theory focused on-line education by visually introducing the practical utilization of an actual AVR 128. In this paper, the proposed educational content was provided to university students, and the results of student feedback show that it has a strong effect.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.161-164
• /
• 2000

The architecture of microprocessor for a embedded system should be one that can perform more tasks with fewer instruction codes. The machine codes that high-level language compiler produces are mainly composed of specific ones, and codes that have small size are more frequently used. Extended Instruction Set Architecture (EISC) was proposed for that reason. We have designed pipe-line system for 64 bit EISC microprocessor. function level simulator was made for verification of design and instruction set architecture was also verified by that simulator. The behavioral function of synthesized logic was verified by comparison with the results of cycle-based simulator.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.755-758
• /
• 1998

As the performance of microprocessor improves, the design complexity grows exponentially. Therefor, it is very important to make the bug-free model as early as possible in a design life-cycle. This paper describes the simulation-based functional verification methodology for the RTL level description model. It is performed by multi-stage verification methods using extensive hand-generated self-checking tests supplemented with random tests. This approach is opplied to the functional verification of the GPU processor of Raptor and various bugs are detected.

• 제어로봇시스템학회논문지
• /
• 제5권7호
• /
• pp.855-861
• /
• 1999

In this paper, we present new application for the auction method which has been based on one-chip microprocessors. We develop the portable wired terminal for market blocker. And, using that, the recommended price of products is able to push into and show the information of action status. Through our research, using EAS(Electronic Auction System), we can prevent supplier from blocker's rigging the market, because anyone who have a qualification for the action blocker is able to participate in action.