• 컴퓨터교육학회논문지
• /
• 제21권6호
• /
• pp.1-14
• /
• 2018

NCS 기반 교육과정의 전문교과 교사는 더욱 전문화된 교수역량을 필요로 한다. 본 연구는 NCS 기반 교육과정 '전자' 교과의 마이크로프로세서 교육을 위한 교수역량을 규명하고, 역량 간 상대적 중요도를 분석하였다. 주요 연구 분석결과는 첫째, NCS 기반 교육과정 '전자' 교과에서 마이크로프로세서 교육을 위한 교수역량은 8개의 주요 역량과 22개의 하위 역량으로 구성되었다. 둘째, 주요역량 간, 각 하위 역량 간 상대적 중요도 조사에서 각각 '소스코드 작성 역량'과 '타겟 시스템 회로도 활용 소스코드 작성 역량'이 최고 순위이다. 본 연구는 전자 교과의 핵심이 되는 마이크로프로세서 교육의 내용과 방법에 대한 개선 및 교사역량 강화를 제안하며, 직업교육 체계화를 위한 가이드라인을 제시하였다. 또한 교수역량 요소를 통해 교사 역량 개발을 위한 전략 수립에 기여할 것으로 기대된다.

• 대한전자공학회논문지SD
• /
• 제41권4호
• /
• pp.83-90
• /
• 2004

본 논문은 메모리 크기의 제약을 많이 받는 내장형 마이크로프로세서의 문제를 해결하기 위해 32-bit 명령어와 24-bit, 16-bit 명령어를 혼합 사용하여 3가지 명령어 모드를 갖는 새로운 명령어 셋(X32V ISA)을 제안하였으며, 이를 기반으로 32-bit 5 stage pipeline RISC 마이크로프로세서를 설계하였다. 이를 검증하기 위해서 X32V ISA 전용 시뮬레이터를 이용하여 멀티미디어 프로그램의 프로그램 코드 사이즈를 산출하였다. 그 결과로 Light mode와 Ultra light mode는 Default mode에 비해 각각 최소 8%, 27%의 프로그램 코드 사이즈 감소를 확인하였으며, Xilinx FPGA를 이용하여 33MHz 동작 환경에서 X32V ISA의 모든 명령어 수행을 검증하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.81-87
• /
• 2005

이 논문은 자동차에서 제어 네트워크로 이미 신뢰성이 확인된 CAN(Controller Area Network) 필드버스를 산업계 복수전동기 제어에 적용하기 위하여 지능형 제어모듈로 CAN 이 내장된 DSP2812 프로세서를 이용하여 제어 및 모니터링기술을 개발하였다. 산업계에 광범위하게 사용되고 있는 유도전동기를 대상으로 여러 대의 유도전동기를 제어하기 위한 제어 알고리즘과 CAN기반제어네트워크 구축방법을 개발하였다. 이 시스템 성능을 평가하기 위하여 2대의 유도전동기 인버터 구동시스템에 적용하여 CAN 기반 네트워크 제어 실험을 수행하였다. 그 결과 광범위한 속도와 정역회전에서 실시간 네트워크 기반 제어성능을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.375-379
• /
• 1990

A microprocessor-based multi-function switchgear for the protection, measurement and control of the power system is presented. For the extraction of the RMS values of the fundamental components of current and voltage signals, a simple digital filter based on cross-correlation of the distorted signal with even and odd heptagonal waves is used. The frequency response of this filter is almost identical to that of the filter based on the discrete fourier transform, while its computational requirement is far less. For the time delay element relaying, a new log-table based relaying algorithm is suggested. The suggested use of the heptagonal wave cross-correlation digital filter algorithm and a new relaying algorithm reduce the computational needs so drastically that all functions of the switchgear can be implemented on the microprocessor system. Real time testing of the implemented daboratory prototype show good practical response under different operating conditions.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2637-2640
• /
• 2003

In this paper, we propose a simple and efficient data input/output block with high speed between Motorola MPC8XX microprocessor and memory devices. Proposed method is capable of high speed data read and write using the address decoder and the burst cycle between Motorola PowerPC based MPC8XX microprocessor and fixed address locating memory devices such as FIFO, PCMCIA card, and so on. Experimental results are given our findings and discussions.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(2)
• /
• pp.602-607
• /
• 1995

This article presents safety review experience of microprocessor-based Interposing Logic System(ILS) of Engineering Safety Feature Actuation System(ESFAS). The ILS is the first application of computerized logic design to safety system in Korean nuclear power plants without verification of the system reliability by proven technology concept. As a result of evaluation for the ILS, Korea Institute of Nuclear Safety(KINS) concluded that the microprocessor-based ILS is not acceptable in some features detailed enough to defend against software common mode failures(CMF). Therefore, we required licensee to install hardwired interlock signal configuration and a Hardwired Backup Panel to control safety-related equipment. We believe that the microprocessor-based ILS with the hardwired backup panel and inter-connection of interlock signal by hardwired configuration will improve the plant safety.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.886-889
• /
• 2003

In this paper a design of educational robot based on a PC and/or a microprocessor is discussed. The educational robot has 5 DOF and Is made with Swiss Mini Servomotor and Motor Controller IC LM629N. Also, a GUI(Graphical User Interface) is programmed by Visual Basic. This system is completed to consider control properties of the educational robot with 5-DOF that can be changed the parameter of controller by software.

• Nuclear Engineering and Technology
• /
• 제44권6호
• /
• pp.697-708
• /
• 2012

The majority of instrumentation and control (I&C) systems in today's nuclear power plants (NPPs) are based on analog technology. Thus, most existing I&C systems now face obsolescence problems. Existing NPPs have difficulty in repairing and replacing devices and boards during maintenance because manufacturers no longer produce the analog devices and boards used in the implemented I&C systems. Therefore, existing NPPs are replacing the obsolete analog I&C systems with advanced digital systems. New NPPs are also adopting digital I&C systems because the economic efficiencies and usability of the systems are higher than the analog I&C systems. Digital I&C systems are based on two technologies: a microprocessor based system in which software programs manage the required functions and a programmable logic device (PLD) based system in which programmable logic devices, such as field programmable gate arrays, manage the required functions. PLD based systems provide higher levels of performance compared with microprocessor based systems because PLD systems can process the data in parallel while microprocessor based systems process the data sequentially. In this research, a bistable trip logic in a reactor protection system (RPS) was developed using very high speed integrated circuits hardware description language (VHDL), which is a hardware description language used in electronic design to describe the behavior of the digital system. Functional verifications were also performed in order to verify that the bistable trip logic was designed correctly and satisfied the required specifications. For the functional verification, a random testing technique was adopted to generate test inputs for the bistable trip logic.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.2051-2054
• /
• 2004

This paper proposes a more accurate task level energy measurement technique for high speed microprocessors. The technique is based on the relationship of the amount of current consumed by the microprocessor and the pulse width of the power supply controller chip, employed in the synchronous buck DC-DC converter in the microprocessor's power supply. The accuracy of the measurement is accomplished by measuring variation in pulse width in each power supply cycle. The major advantage of this technique is that its accuracy does not depend on the operating frequency of the microprocessor. To prove the proposed technique, we implemented the measurement unit of the microprocessor energy meter using an FPGA chip operating at 50 MHz. Both static and dynamic load measurement are tested in order to obtain some behaviours. Moreover, various commercially available mainboards which employ synchronous buck regulators at 200 KHz switching frequency, were measured. The results agree with previous works with better accuracy at higher operating frequency.

• 대한전기학회논문지
• /
• 제36권12호
• /
• pp.856-867
• /
• 1987

Microprocessor control of power-electronic equipment offers the possibility of improvements in manufacture, realizability, maintenance and servicing, and increased control flexibility. In this paper, simple microprocessor control with a view to approximating the polynomial equations which govern the commutation angles was consisdered. The theoretical analysis of this principle which govern the commutaton of power switches in order to cancel any predetermined harmonics and vary the fundamental rms voltage of the inverter output is described. Also the spectrum and harmonics were analyzed by HP-1000 computer. Practical aspect of the realization of a voltage controller based on a microprocessor and a suitable system for variable frequency inverter were also presented. The experimental test has been carried out on a Z-80 microcomputer and a single phase transistor inverter. The various results show the feasibility of obtainintg practically a single phase and a three phase inverter waveforms, which are highly desirable in most inverter applications.