• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.11a
• /
• pp.152-156
• /
• 2000

Many industrial equipments use RS-232C interface. But Ethernet using CSMA/CD was widly spread recently. This interface is not compatible with RS-232C and requires PC based system. So In this Paper, We decribe a Internet control and monitoring system that control and watch plants without PC. We developed IP controller consisted of microprocessor and NIC and monitoring system using VC++ and SQL database. The protocol used this system is UDP/IP because it is applicable for real time system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.8
• /
• pp.990-997
• /
• 2007

In the last 5 years, collisions of fishing vessels have recorded about 54.6% of the total marine accidents. Specially about 64.0% of these collisions were caused by navigator's negligence of watch keeping during works. The purpose of this paper is to develop vessel detecting system that is able to receive the whistle blast of other vessel and make a warning sound and light when the fishermen can not confirm the approaching another vessel on account of fishing works. It is designed to receive the whistle signal blast by a weather tight microphone. The signal is processed by analog active filter in order to enhance the SNR(Signal to noise ratio). And this microprocessor-based system is programmed to do ADC(Analog to digital converting), FFT analysis, controls of warning sound and light.

• Proceedings of the KOSOMBE Conference
• /
• v.1992 no.11
• /
• pp.93-96
• /
• 1992

The object of this research is to develop the autobalancing system based-on microprocessor for hemodiafiltration(HDF). The results obtained from the proposed system are as follows: (1) Conventional HD system is not proper for removal medium molecular articles but HDF is proper when this autobalaning system is interfaced. (2) we can get mere exact information than conventional HD system using electronic balancemeter.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.5
• /
• pp.419-424
• /
• 2006

In this study, a thermal control system which applied a Peltier device for the polymerase chain reaction(PCR) machine is to be designed. Here in order for it to easily follow the characteristics of the thermal cycle existing for gene amplification of the PCR sample, a PCR control board utilizing a thermal sensor, a Peltier, and a 8 bit microprocessor is made up. Especially a fuzzy type PD control algorithm is applied periodically in time response, and control system is implemented. For that matter, the characteristic data of subject system is obtained and analysed to begin with. Based on this analysed data, the proposed control algorithm is applied and an evaluation of the performance of the whole system take place through the PC.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.3
• /
• pp.473-479
• /
• 2015

Thermal relays are sometimes used instead of long time overcurrent relays for motor protection. But, it is difficult for any relay design engineer to adequately approximate motor heating curves which represent the average of a difficult-to-define thermal zone. Thermal relays frequently may not provide sufficient protection on heavy overloads. Digital multifunction relays are microprocessor-based devices. These relays offer highly reliable and advanced protection of motors. If a situation can be mathematically described, the microprocessor in a digital relay can be programmed to tackle that problem. Today's motor protection is accomplished with digital protective relays. Digital relays offer additional, highly important features to complement protection. The best way to prevent short in motor is to not overheat and degrade the insulation.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.344-351
• /
• 2000

Recently, the microprocessor with network function based-controlled systems instead of conventional microprocessors is widely used to industrial applications, and also those technologies are widely adopted for train control and monitoring in modern rapid transit systems such as railway vehicles. The purpose of this paper is to propose a high quality data transmission line of railway vehicle system controlled by a microprocessor, which was designed and realized through SMG 7＆8 and ISA project. Noise, distortion and attenuation are always present in data transmission system and strictly limit performance. This paper describes a method to calculate the propagation constant, attenuation constant, phase velocity and length of stub.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.612-614
• /
• 2001

One of the frequently used relay in industry is SR relay The SR relay has roughly two kinds. Wenn the power is off, one can memorize the previous ?tate and the other can be set automatically to the initial setting position. Those relays are constructed mechanically, so that they have some disadvantages, such as electro magnetical and acoustic noise. Such problem can be easily solvedby using a microprocessor. In this contribution will show the opportunity, how easily the relay function with a microprocessor can be reconstructed. As an example the function of Impulse Set Reset Relay will be discussed.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.318-320
• /
• 1995

This paper describes the practical implementation of switched reluctance motor drive for a wide range of operation speeds. The angle controller is designed by one-chip microprocessor 8051 for various real time applications. Algorithm to control the speed of SRM and to maintain the speed under the changed load is proposed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.1-6
• /
• 2019

The purpose of this paper is to design a curtain control system for centralized management of large curtains, which includes curtain structure, electric curtain controller, communication system, user interface and remote control. Curtain structure is designed to avoid using limit switch. The system is based on microprocessor, determined the stop position and complete running time of electric curtain through time control, and achieved remote control of curtain opening and closing through wired and wireless communication modes. By establishment of a mathematical model to calculate the inertia compensation time of the electric curtain, the electric curtain can be stopped ahead of time, and the curtain can be completely closed by the inertia. The result of test experiment of 32 electric curtain controllers shows the communication success rate reached 100%.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.82-86
• /
• 1989

In this paper, digital autopilot design methods are investigated and a new method is suggested in order to improve existing problems. The method is based on .delta. transform (1) and overcome numerical problems occurring in the process of discretization. We illustrate design procedures using .delta. transform and suggest a hardware and software structure for digital autopilot implemented by microprocessor.