• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.2
• /
• pp.26-31
• /
• 2007

A novel scanning probe measurement system was developed to enable precise profile measurements of microaspheric surfaces. An air-bearing stylus with a microprobe was used to perform the surface profile scanning. The new system worked in a contact mode and had the capability of measuring micro-aspheric surfaces with large tilt angles and complex profiles. Due to limitations resulting from the contact mode, such as possible damage caused by the contact force and lateral resolution restrictions from the curvature of the probe tip, several system improvements were implemented. An air bearing was used to suspend the shaft of the probe to reduce the contact force, enabling fine adjustments of the contact force by changing the air pressure. The movement of the shaft was measured by a linear encoder with a scale attached to the actual shaft to avoid Abbe errors. A $50-{\mu}m-diameter$ glass sphere was bonded to the tip of the probe to improve the lateral resolution of the system. The maximum contact force of the probe was 10 mN. The shaft was capable of holding the probe continuously if the contact force was less than 40 mN, and the resolution of the probe could be as high as 10 nm, The performance of the new scanning probe measurement system was verified by experimental data.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.421-428
• /
• 1999

Potassium (K) released from weathering of biotite in soils has been recognized as one of major K-sources for plant growth. Sand size biotite in a soil-saprolite-parent rock profile developed under temperate climate was studied in terms of morphological, mineralogical, and chemical changes according to depth employing petrographic and electron microscopes. X-ray diffraction, and electron microprobe. Biotite showed discoloring from black to goldish white and loss paleochroism with decreasing depth. Both edge and layer weatherings of biotite showed in this study. Hexagonal holes and cracks on (001) plane of weathered biotite grains were observed and their members increased with increasing weathering degree. Biotite was altered to kaolinite with or without intermidiate products such as hydrobiotite, degraded biotite, and illite. Average chemical composition of weathered biotite changed to that of katolinite with decreasing depth: increasing concentrations of silicon (Si) and aluminum (Al) and decreasing concentrations of potassium (K), iron (Fe), magnesium (Mg), manganese (Mn), and taitanium (Ti).

• Journal of Korea Foundry Society
• /
• v.7 no.4
• /
• pp.358-365
• /
• 1987

To investigate the grain refining mechanism of Al by the addition of Ti-B, the unidirectional solidifications of 99.9%Al and 99.7%Al were performed under the condition of varing the pouring temperature. The solidification modes of Al were studied by the cooling curve analyses, metallographic and microprobe examinations. The results were as follows: 1) Grains were most refined with an addition of 0.15wt.%Ti-0.021wt.%B but the grain size with 0.2wt.%Ti-0.028wt.%B was increased. 2) The grain size of 99.7wt.%Al was even more refined than that of 99.9wt.%Al with the same amount of Ti-B. 3) As the pouring temperature increased, the grain size of pure Al and an alloy with 0.lwt.%Ti-0.014wt.%B was increased. However, an alloy with 0.2wt.%Ti-0.028wt.%B did not show any effects of temperature. 4) TiC(Al-Ti) and (Al-Ti-C) were identified as nucleants for Al.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.124-124
• /
• 2009

We observed the changes of crystal structure of Rubrene (5,6,11,12-tetraphenylnaphthacene) polycrystal thin films at various in situ substrate temperature and process by scanning electron microscope(SEM), x-ray diffraction (XRD) and near-field microwave microprobe (NFMM). Amorphous rubrene thin film was initially obtained on 200 nm thick $SiO_2/Si$ substrate at 35 $^{\circ}C$ in a vacuum evaporation but in situ long time postannealing at the temperature 80 $^{\circ}C$ transformed the amorphous phase into crystalline. Four heating conditions are followed : (a) preheating (b) annealing (c) preheating, annealing (d) preheating, cooling(35 $^{\circ}C$), annealing. We have obtained the largest polycrystal disk in sample (c). But the highest crytallity and conductivity of the rubrene thin films were obtained in sample (d).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.1
• /
• pp.41-46
• /
• 2007

Surface potential properties at the interface of pentacene thin films on gold (Au) and aluminum (Al) surfaces were investigated by using a near-field scanning microwave microprobe (NSMM). The surface potential formed across the pentacene film was observed by measuring the microwave reflection coefficient $S_{11}$ and compared with the result of a Kelvin-probe method. The obtained reflection coefficient ${\Delta}S_{11}$ of the pentacene thin films on Al was decreased as the pentacene film thickness increased due to the increased accumulation of negative space charges, while for Au ${\Delta}S_{11}$ was essentially constant.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.11
• /
• pp.1531-1540
• /
• 2002

With the invention of the inlaying technique for celadon in the latter half of the 12th century, the Koryo potters reached a new height of artistic and scientific achievement in ceramics chemical technology. Inlaid celadon shards, collected in 1991 during the surface investigation of Kangjin kilns found on the southwestern shore of South Korea, were imbedded in epoxy resin and polished for cross-section examination. Backscattered electron images were taken with an electron microprobe equipped with an energy dispersive spectrometer. The spectrometer was also used to determine the composition of micro-areas. Porcelain stone, weathered rock of quartz, mica, and feldspar composition were found to be the raw material for the body and important components in the glaze and white inlay. The close similarity between glaze and black inlay in the microstructure suggests that the glaze material was modified by adding clay with high iron content, such as biotite, for use as black inlay. The deep soft translucent quality of celadon glaze is brought about by its microstructure of bubbles, remnant and devitrified minerals, and the schlieren effect.

• Journal of the Mineralogical Society of Korea
• /
• v.8 no.1
• /
• pp.13-22
• /
• 1995

Phase relations of the Pd-Sb system were investigated using the sealed-capsule technique; the quenched run products were studied by reflected light microscopy, X-ray diffraction, and electron microprobe analysis. Eight binary phases were confirmed to exist in the system: Pd20Sb7, Pd31Sb12, Pd8Sb3 (mertieite II), Pd5Sb2, Pd2Sb, Pd5Sb3, PdSb (sudburyite), and PdSb2, (unnamed PdSb2), The X-ray powder diffraction data of all the phases, except for Pd5Sb3, however, may be indexable on an orthorhombic cell, space group Cmc2, with a=3.362(1), b=17.484(7), c=6.934(2)$\AA$. Some physical properties as well as re-determined cell parameters are newly established. A revised phase relations of the Pd-Sb system are presented.

• Journal of the Mineralogical Society of Korea
• /
• v.12 no.1
• /
• pp.11-22
• /
• 1999

Thermal behavior of dickite was studied by thermal analysis, X-ray diffraction analysis, electron microprobe analysis, and scanning electron microscopy, Dickite has an endothermic peak at about$ 650^{\circ}C$ and an exothermic one at $960^{\circ}C$ in the differential thermal analysis. The endothermic reaction is assigned to the decomposition of dickite to meta-dickite. Hydroxyl radicals are removed from dickite structure by the reaction, resulting in the weight loss about 10.5~14.5% and appearance of a 14$\AA$ phase different from other kaolin minerals. The reaction slowly proceed in the range of $200^{\circ}C$. As the completion of decomposition, aciclular mullite forms at the expense of meta-dickite plates with random crystallographic relationship. Mullites have diverse silica versus alumina ratio. The exothermic reaction without weight loss seems to be due to the formation of spinel and amorphous silica. The spinel phase shows cryptocrystalline globular morphology accompanying a little amount of silica. From spinel phase shows cryptocrystalling globular morphology accompanying a little amount of silica. From this work, it is suggested that mullite is formed from meta-dickite much lower temperature than the reported one in the previous works.

• Transactions of the Korean hydrogen and new energy society
• /
• v.7 no.1
• /
• pp.111-115
• /
• 1996

Metal atom rearrangement has been shown to take place under the influence of hydrogen-induced atomic diffusion (HIAD) in initially homogeneous fee palladiumalloys by electron microprobe analysis, optical microscopy, mechanical property tests and hydrogen isotherms. HIAD takes place in palladium alloys at moderate to elevated temperatures leading to phase segregation under conditions where segregation does not normally occur, i.e., in the absence of H over the time scale of the experiments. From these results, it is confirmed that dissolved hydrogen plays a dual role in some of these alloys, i.e. it catalyzes metal atom diffusion. This research demonstrates the potential utility of employing H-induced changes for phase diagram determination of Pd alloys and possibly for other alloy system.

• Electrical & Electronic Materials
• /
• v.9 no.6
• /
• pp.616-625
• /
• 1996

본 고에서는 최첨단 주사형 마이크로프로브현미경의 최근동향에 대해 기술하고자 한다. SNOAM의 관찰분야에의 응용이라는 관점에서 광학소자, 반도체재료, 유기박막등의 미소영역에의 광학특성의 관찰이외에 생물분야에서는 형광표식한 시료의 형상상과 형광상의 대비에서 세포나 생체고분자의 기능 해명에도 이용 가능하다고 생각된다. 또한 광가공기술에의 응용이나 기억소자 기술에의 응용도 고려되어져 금후의 응용분야에의 발전이 기대된다. 다가오는 21세기 정보화사회에서는 분자.원자를 제어하는 기술이 중심기술이 될 것으로 확신되고 있다. 그러나 현재 우리주변 기술로서 분자. 원자를 단위로 하는 평가, 분석 기술은 거의 찾을 수 없다. 따라서 주사형 마이크로 프로브 현미경은 Nano-technology로서 장래 정보화사회에 중요한 평가.분석기술의 하나로서 정착될것으로 생각된다.