• 제목/요약/키워드: Microgrid operation

검색결과 140건 처리시간 0.027초

마이크로그리드용 순간정전발생기의 순간정전모드 동작시 전류특성 해석 (Analysis of current characteristics of outage generator for microgrid in outage mode operation)

  • 이영호;민병호;노의철;김인동;전태원;김흥근
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2008년도 하계학술대회 논문집
    • /
    • pp.130-132
    • /
    • 2008
  • This paper describes the current characteristics of outage generator for microgrid in outage mode operation. The outage can be generated with 3-phase voltage disturbance generator. The STS current becomes very huge during the first cycle of the outage, and the magnitude of the current depends on the time impedance, series transformer leakage inductance, interfacing reactor of PCS, and the maximum allowable PCS output current. The current and load voltage waveform are analysed through simulation.

  • PDF

3상 인버터의 계통연계 및 독립운전모드 전환 연구 (Seamless Transfer Operation Between Grid-connected and Stand-Alone Mode in the Three-phase Inverter)

  • 이우종;조현식;이학주;차한주
    • 전기학회논문지
    • /
    • 제62권2호
    • /
    • pp.201-207
    • /
    • 2013
  • This paper propose seamless transfer operation between grid-connected and stand-alone mode in the three-phase inverter for microgrid. The inverter operates grid-connected mode and stand-alone mode. Grid-connected mode is the inverter connected to grid and stand-alone mode is to deliver energy to the load from inverter at grid fault. When conversion from gird-connected to stand-alone mode, the inverter changes current control to voltage control. When grid restored, the inverter system is conversion from stand-alone to grid-connected mode. In this case, load phase and grid phase are different. Therefore, synchronization is essential. Thus Seamless transfer operation stand-alone to grid-connected mode. In this paper, propose sealmless transfer operation between grid-connceted and stand-alome mode, and this method is verified through simulation and experiment.

마이크로그리드시스템의 분산 에너지관리시스템 설계를 위한 통합시뮬레이션 모델 개발 (Integrated Simulation Model for Designing Distributed Energy Management System in Microgrid System)

  • 조재훈;박선홍;이대종;조영임;전명근
    • 한국지능시스템학회논문지
    • /
    • 제21권1호
    • /
    • pp.29-35
    • /
    • 2011
  • 본 논문에서는 신재생에너지원을 포함하는 독립형 마이크로그리드시스템의 멀티에이전트시스템 기반의 분산에너지관리시스템 설계를 위한 통합시뮬레이션 모델을 제안한다. 멀티에이전트기반 분산에너지관리시스템은 일반적인 중앙에너지관리시스템에 비해 여러 장점들을 가지고 있으나 각 상태에 따른 설계가 비교적 복잡하여 기존의 전력시스템 도구를 이용하여 분산 에너지관리시스템을 설계하기에는 많은 어려운 점들이 있었다. 또한 설계된 에너지관리시스템을 실제 시스템에 적용하여 평가하는 것은 비능률적이기 때문에 효과적인 에너지관시스템을 설계하기 위해서는 통합시뮬레이션 모델이 필요하다. 제안된 통합시뮬레이션 모델은 Matlab/Simpowersystem 기반의 마이크로그리드시스템의 시뮬레이션 모델과 이벤트기반의 알고리즘 설계에 많은 장점이 있는 Matlab/StateFlow을 이용하여 설계된 멀티에이전트기반의 분산에너지관리시스템으로 구성되었다. 통합시뮬레이션 모델의 효용성을 보이기 위하여 특정한 동작 조건들에서 제안된 모델의 출력들을 분석하였다.

영구자석형 풍력-디젤 복합발전시스템 모델링 및 운전제어 알고리즘에 관한 연구 (Modeling & Operating Algorithm of Islanding Microgrid with PMSG Wind Turbine and Diesel Generator)

  • 김재언
    • 한국산학기술학회논문지
    • /
    • 제16권9호
    • /
    • pp.6419-6424
    • /
    • 2015
  • 현재 도서지역에 도입되어 운용되고 있는 풍력-디젤 하이브리드 발전시스템에는 풍속과 부하변동에 대하여 적정범위의 전압주파수를 갖는 전력을 공급하기 위하여 고가의 제어가 복잡한 플라이휘일 또는 배터리 에너지저장장치를 설치운영하고 있다. 그러나, 본 논문은 이와 같이 비경제적이고 복잡도가 높은 에너지저장장치를 설치하지 않고, 풍속 및 부하변동에도 안정적인 운전이 가능한 영구자석형(PMSG: Permanent Magnet Synchronous Generator) 풍력-디젤 복합발전시스템으로 구성되는 독립형 마이크로그리드의 운전제어 알고리즘과 모델링 방법을 제안하였다. 먼저, 부하 및 풍속변동에 관계없이 적정범위의 전압주파수를 유지할 수 있는 PMSG 풍력발전기의 운전제어 알고리즘을 제안하고, 이를 바탕으로 한 전가변속 운전이 가능한 PMSG, WT측 컨버터 및 Grid측 컨버터를 모델링하고, 이를 독립형 마이크로그리드에 적용하여 풍속 및 부하변화에 대하여 전압주파수가 적정범위내로 잘 유지됨을 입증하였다.

근거리 무선통신(Zigbee)을 이용한 마이크로 그리드 운영기법 (Microgrid Operation Method Using Short-range Wireless Communication)

  • 최원준;정일엽;원동준
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.410-411
    • /
    • 2011
  • 본 논문에서는 태양광 전원, 배터리, 마이크로터빈, 스마트 홈 등 다양한 목적과 특성을 가진 요소로 구성된 마이크로그리드를 효율적으로 제어, 관리하기 위한 분산 지능형 제어원리를 제안한다. 기존의 중앙집중식 제어원리는 중앙에서 전체 시스템에 대한 정보를 취득하여 운영에 대한 의사결정을 독점하는 구조였다면 제안하는 원리는 마이크로그리드의 구성요소가 각각 지능형 에이전트를 기반으로 스스로 데이터를 취득하고 이웃 에이전트와의 대화와 협조를 통해 분산제어를 수행하는 방식이다. 각 에이전트 사이는 근거리 무선통신 방식인 Zigbee를 이용하였고 마이크로그리드를 실시간으로 해석하기 위하여 MATLAB 기반의 실시간 시뮬레이터를 이용하였다. 실시간 마이크로그리드 시뮬레이션 모델과 에이전트 역할을 하는 마이크로 컨트롤러를 연계하여 Hardware-in-the-loop 기반의 데모시스템을 구축하였고 제안하는 원리에 대해 검증하였다.

  • PDF

Mitigation of Voltage Unbalances in Bipolar DC Microgrids Using Three-Port Multidirectional DC-DC Converters

  • Ahmadi, Taha;Rokrok, Esmaeel;Hamzeh, Mohsen
    • Journal of Power Electronics
    • /
    • 제18권4호
    • /
    • pp.1223-1234
    • /
    • 2018
  • In this paper, a new three-port multidirectional DC-DC converter is proposed for integrating an energy storage system (ESS) to a bipolar DC microgrid (BPDCMG). The proposed converter provides a voltage-balancing function for the BPDCMG and adjusts the charge of the ESS. Thanks to the multi-functional operation of the proposed converter, the conversion stages of the system are reduced. In addition, the efficiency and weight of the system are improved. Therefore, this converter has a significant capability when it comes to use in portable BPDCMGs such as electric DC ships. The converter modes are analyzed and small-signal models of the converter in each of the independent modes are extracted. Finally, comprehensive simulation studies are carried out and a BPDCMG laboratory prototype is implemented in order to verify the performance of the proposed voltage balancer using the burst mode control scheme.

Droop Control Method Based on Generation Cost in DC Microgrid

  • Hoang, Duc-Khanh;Lee, Hong-Hee
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2017년도 추계학술대회
    • /
    • pp.33-34
    • /
    • 2017
  • This paper presents a linear droop control scheme based on the generation costs of DGs in an autonomous DC microgrid. Unlike the proportional power sharing of the conventional droop control, in the proposed control algorithm, the minimum output voltage range is adjusted and the droop coefficients are regulated according to the generation costs of DGs. As a result, the DGs with lower costs supplies more power in comparison with those with higher costs. Therefore, total generation cost of the system is reduced significantly. The proposed method is simple to implement and it does not require the centralized controller and communication links.

  • PDF

리튬 배터리를 연계한 100kVA UPQC 개발 및 성능시험 (The Development and Experimental Evaluation of 100kVA Unified Power Quality Conditioner interconnected to the Li-Battery System)

  • 이학주;채우규;박중성;손진만;최은식
    • 조명전기설비학회논문지
    • /
    • 제26권10호
    • /
    • pp.102-110
    • /
    • 2012
  • This paper propose the advanced topology of UPQC, its DC link is connected with Lithium battery, to compensate the momentary interruptions. The proposed system can be operated as UPS mode using the parallel inverter, which control the charge or discharge of battery, in case of the interruption. We dvelop 100kVA UPQC using the proposed topology to rise the power quality and the reliability of Microgrid. We verify its usefulness through voltage compensation test, UPS operation test and etc. using Microgrid test facility.

PSCAD/EMTDC를 활용한 LVDC 고장분석 (A Study on the Fault Analysis of the LVDC Using PSCAD/EMTDC)

  • 김수환;최규완;문종필;김태훈;김주용
    • 전기학회논문지P
    • /
    • 제65권3호
    • /
    • pp.219-223
    • /
    • 2016
  • DC microgrid system is attracted attention in the world, because DC distribution system is more energy efficient than AC distribution system. To analyse the contribution effects of distributed generation(DG) in LVDC distribution system through modeling the Rectifier, DC/DC converter, Energy Storage System(ESS) and Photovoltaic(PV). using PSCAD/EMTDC. This paper analyses fault response characteristics in LVDC distribution system according to the interconnection and islanding operation of DG. Based on research results on the paper, direction for development of fault current reduction method for LVDC distribution system is suggested.

다중 분산전원으로 구성된 마이크로그리드의 유무효전력 제어원리 연구 (Power Control Methods for Microgrid with Multiple Distributed Generators)

  • 정일엽;원동준;문승일
    • 전기학회논문지
    • /
    • 제57권4호
    • /
    • pp.582-588
    • /
    • 2008
  • Microgrids are new distribution level power networks that consist of various electronically-interlaced generators and sensitive loads. The important control object of Microgrids is to supply reliable and high-quality power even during the faults or loss of mains(islanding) cases. This paper presents power control methods to coordinate multiple distributed generators(DGs) against abnormal cases such as islanding and load power variations. Using speed-droop and voltage-droop characteristics, multiple distributed generators can share the load power based on locally measured signals without any communications between them. This paper adopts the droop controllers for multiple DG control and improved them by considering the generation speed of distribution level generators. Dynamic response of the proposed control scheme has been investigated under severe operation cases such as islanding and abrupt load changes through PSCAD/EMTDC simulations.