• 멤브레인
• /
• 제7권2호
• /
• pp.84-94
• /
• 1997

Hollow fiber의 diameter와 curvature 및 turn수 등의 변화에 따른 첫번째 모듈 set와 두번째 모듈 set 사이의 성능비교가 이루어졌다. 모든 실험들은 같은 transmembrane pressure와 막면적당 에너지 소모하에서 수행되었다. 첫번째 모듈 set에 대해서 Dean vortices에 의한 농도분극과 막오염현상의 감소시키는 효과가 매우 작음을 알 수 있었다. 두번째 모듈 set에 대해서 115%의 투과 flux 향상값 (투과 flux 증분 ${\times}100$/선형 모듈의 투과 flux)을 보였다. 이로부터 두번째 모듈 set가 yeast suspension에 의한 농도분극과 막오염현상의 감소에 훨씬 효과적임을 알 수 있었다.

• Macromolecular Research
• /
• 제14권6호
• /
• pp.596-602
• /
• 2006

The effect of high-temperature spinning and poly(vinyl pyrrolidone) (PVP) additive on poly(vinylidene fluoride) (PVDF) hollow fiber membranes was investigated using differential scanning calorimetry, X-ray diffraction measurement, and scanning electron microscopy, together with the corresponding microfiltration performances such as water flux, rejection rate, and elongational strength. Using high-temperature spinning, porous hollow fiber membranes with particulate morphology were prepared through PVDF crystallization. The particulate structure of the membranes was further modified by the addition of miscible PVP with PVDF. Due to these effects, the rejection rate and strength of the fibers were increased at the expense of reduced water flux and mean pore size, which indicates that high-temperature spinning and PVP addition are vary effective to control the morphology of PVDF hollow fiber membranes for microfiltration.

• 청정기술
• /
• 제7권3호
• /
• pp.179-185
• /
• 2001

각종 전처리 필터로 사용되는 정밀여과막은 국내의 경우 대부분 수입에 의존하고 있다. 몇몇 회사에서 개발을 시도하고 있지만, 막에 대한 특성 파악이나 공극제어등과 같은 문제를 해결하는데 많은 어려움이 있다. 따라서 본 연구에서는 A 사에서 개발한 정밀여과막을 이용하여 한강원수와 시수에 대하여 RO 유입전 전처리 필터로서의 적합성을 판단하고자 본 연구를 수행하였다. 한강원수는 총 2회에 걸쳐서 실험을 실시하였다. 적정 공급수 압력은 0.2~0.4 기압이며 여과수의 탁도는 0.4 NTU를 나타냈다. 플럭스는 $6,000{\sim}9,000L/m^2/hr$ 였다. 시수의 경우 회수율을 90%로 운전시 안정된 플럭스와 탁도를 나타내었다. 화학세정 후 TMP의 증가율은 감소를 하였으며, 탁도는 0.4 NTU에서 0.1 NTU로 개선되었다.

• 청정기술
• /
• 제5권2호
• /
• pp.69-78
• /
• 1999

수용성 에멀젼형 절삭유의 한외여과 및 정밀여과 특성을 실험적으로 연구하였다. 한외여과막의 경우 오일/물 에멀젼의 투과 거동은 film model을 잘 따랐으나 정밀여과막인 ASYPOR막의 경우에는 이러한 거동을 벗어났다. 본 연구에서 사용된 모든 분리막의 경우 운전압력이 투과유속에는 큰 효과를 나타내지 않았다. 저압에서는 투과 초기 및 후기에서의 투과유속 감소율이 적은 반면 고압에서는 초기 투과유속은 매우 컸으나 투과유속의 감소율이 커서 후기에는 모두 비슷한 투과유속을 보여 주었다. 소수성이 큰 polycarbonate 정밀여과막의 경우 일반적인 경우와는 달리 운전시간이 증가함에 따라 투과유속이 증가하는 경향을 나타내었다. 교반하지 않은 cell에서의 임계투과압력은 150 ppm의 에멀젼 농도에서 약 $2.2kg_f/cm^2$이었으나 500 ppm의 농도에서는 $3.8kg_f/cm^2$ 압력에서 나타났다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 The 4th Korea-Italy Workshop
• /
• pp.7-10
• /
• 2003

Factors affecting filtration performance were investigated in a Sequencing Batch Reactor (SBR) coupled with a submerged microfiltration module. Special bioreactors for aerobic and anoxic phases, respectively, were specifically designed in order to differentiate tile effect of Dissolved oxygen (DO) from that of mixing intensity on membrane filterability. DO concentration as well as mixing intensity proved to have a major influence on the membrane performance regardless of the SBR phase. A higher DO concentration resulted in a slower rise in TMP, corresponding to less membrane fouling.

• Environmental Engineering Research
• /
• 제23권2호
• /
• pp.159-163
• /
• 2018

The feasibility of applying coagulation-integrated microfiltration (MF) as a pretreatment for an ultrafiltration (UF) feed in oily wastewater treatment was investigated. The effects of different coagulants on oil removal rates from wastewater were studied. The maximum oil removal rate of 82% was obtained after coagulation with 130 mg/L of polyaluminium chloride (PAC). UF flux reached $95L/(m^2{\cdot}h)$ with coagulation-integrated MF as pretreatment. This value was 2.5 times higher than that flux obtained without pretreatment. The value of UF flux increased as the transmembrane pressure (TMP) and cross-flow velocity (CFV) of the UF module increased. UF flux gradually increased when TMP and CFV exceeded 0.4 MPa and 3 m/s, respectively, because of concentration polarization and membrane fouling stabilization. Chemical oxygen demand reduction and oil removal rate reached 95.2% and 98.5%, respectively, during integrated membrane processing with a PAC concentration of 130 mg/L, TMP of 0.4 MPa, and CFV of 3 m/s for UF. In addition, sequentially cleaning the fouling membrane with NaOH and $HNO_3$ aqueous solutions caused UF flux to recover to 90%. These encouraging results suggested that the hybrid integrated membrane process-based coagulation and MF + UF are effective approaches for oily wastewater treatment.

• Korean Membrane Journal
• /
• 제10권1호
• /
• pp.33-38
• /
• 2008

In this study periodic water-back-flushing using permeate water was performed to minimize membrane fouling and to enhance permeate flux in tubular ceramic micro filtration system for Gongji stream water treatment in Chuncheon city. The filtration time (FT) 2 min with periodic 6 sec water-back-flushing showed the highest value of dimensionless permeate flux ($J/J_0$), and the lowest value of resistance of membrane fouling ($R_f$), and we acquired the highest total permeate volume ($V_T$) of 7.44L. Also in the results of BT effect at fixed FT 10 min, BT (back-flushing time) 20 sec showed the lowest value of $R_f$ and the highest value of $J/J_0$, and we could be obtained the highest $V_T$ of 8.04 L. Consequently FT 10 min and BT 20 sec could be the optimal condition in Gongji stream water treatment. Then the average rejection rates of pollutants by our tubular ceramic MF system were 93.8% for Turbidity, 20.7% for $COD_{Mn}$, 39.2% for $NH_3$-N and 31.5% for T-P.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 Energy Saving Membrane Separtion Systems 에너지 절약형 막분리 시스템
• /
• pp.93-116
• /
• 1999

MF membrane element was specially designed for water purification and VSA process which can solve the fouling problem. Especially VSA process is developed for the SK Chemicals' asymmetric microfiltration hollow fiber membranes. In case of outside-to-in filtration process, MF membrane element showed the excellent flux stability caused by cleaning ability of VSA process . Simultaneous back-washing with VSA consideratbly enhances cleaning efficiency. From the result the possibility of the replacement of chemical coagulation and sand filtration process with newly developed VSA process was revealed.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1995년도 추계 총회 및 학술발표회
• /
• pp.102-105
• /
• 1995

The membrane separation process is being utilized to save energy in various fields such as the food, biotechnology, chemical, enviromental fields. Especially the use of ceramic membrane among various inorganic membranes is expected to expand to their excellent thermal, chemical and mechanical resistance. In this presentation, we would like to explain our ceramic membrane CEFILT MF for microfiltration and CEFILT UF for ultra-filtration, and the purification of fermentation products as the application example using CEFILT MF.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.63-66
• /
• 1999

MF membrane element was specially designed for water purification and VSA process which can solve the fouling problem. Especially VSA process is developed for the SK Chemical's asymmetric microfiltration hollow fiber membranes. In case of outside-to-in filtration process, MF membrane element showed the excellent flux stability caused by cleaning ability of VSA process. Simultaneous back- washing with VSA considerably enhances cleaning efficiency. Form the result, the possibility of the replacement of chemical coagulation and sand filtration process with newly developed VSA process was revealed.